Cask ACS v4.2 canning line. 35-40 CPM, plus auto and manual depalletizers, twist rinses and change parts for 12oz and 16oz, date coder ( $68,500 )New Featured
Cask ACH Canning Line for sale in Portland Oregon. Thoroughly tested and approved. Many upgrades like HMI touchscreen interface, new parts throughout (we were hunting for an issue with the seamer and replacing every part we touched, turned out to be something stupid!), brand new product lines, a 25′ 4-wire 40amp power cord, and much more. Sale includes an auto depalletizer and an infeed shaker table (or manual depal), both by Cask. 12oz and 16oz twist rinse cages, changeover parts for both sizes. Mathews i-Mark C84 continuous inkjet printer, attaches to twist rinse and hits the bottom of the can with a date code on its way through (up to 4 lines of text), retail $8000. Including several thousand dollars worth of spare parts and several original manuals in 3-ring-binders. We welcome in-person inspections. Unit is ready to pickup or ship, we can handle freight or facilitate your arrangements. Can...
CBK Filler IFC 6-6 Automatic Filler and rinse table for sale. Fully automated counter pressure filler for filling 12 ounce long necks and 22 oz bombers. Double evac CO2 and automatic crowner. Comes with a 24 bottle rinse table for both sizes. Currently set for 12 oz but can be changed out for 22 oz bottles. We achieved a fill rate of approximately 12 cases an hour. Manual load in and out of bottles. Machine works great and has been lightly used! Original list price was $60,000 new. Asking $24,500. You pay shipping from Reno, NV (89511). We will ship in the original manufacturers crate.
Item Type: Case Erector Manufacturer: Pearson Model: CE-25T Year: 2009 Last Use: Distribution Plant Dimensions: 10x5x6 Condition: Good Unit was purchased in 2009, Utilizes Tape to Seal Boxes, Speeds 15-20 cases per minute (depending on case size), Allen Bradley CompactLogix L31 PLC, Stack Vertical Blank Magazine, Makes cases from 8.75 inches to 23.50 inches in length, 5.00 inches to 16.00 inches in width, 5.00 inches to 21.00 inches in depth, adjustable machine, 230/460 Voltage, 60HZ, 3PH, Six Machines Available to Choose From
Item Type: Accumulation Table Manufacturer: Ambec Model: 6 x 12 Last Use: Bottling Dimensions: 6 x 12 x 4 tall Last used in dairy plant for round HDPE Bottles, Stainless Steel Construction with Plastic Belting, Center Drive Motor, Good Condition
Item Type: Cartoner Case Packer Manufacturer: Jones Model: Meridian MPSC-210 Serial: S-6245 Year: 2008 Last Use: Beverage Cans Dimensions: 35x6x8 Condition: Very Good Unit was purchased new in 2008, Last running 12oz. Aluminum Cans, Allen Bradley ServoLogix 5561 PLC with Panelview Plus 700 Operator, Allen Bradley Kinetix Servo Drives, Horizontal Infeed Blank Hopper, Last ran 12 Pack Fridgepacks, 18 Pack Suitcase and 24 Pack Suitcase, Quick Change-overs, Stainless Steel Construction, Nordson ProBlue 15 Glue Unit – 6 to 24 pack configurations – Speeds up to 210 cases/minute – Can sizes from 8oz. to 16oz. – Tool-less changeover – Stainless steel, debris fall-through design – Servo driven dual pitch transport – Automatic (CIP) chain cleaning system – Auto chain oiler on transport chains – Compact 24.5 ft. frame length – Cycle stop ap closing – 12” machine centers – Three head rotary carton feed – 8 ft. carton magazine – Versaview...
Item Type: Multi Stuffer Manufacturer: Pearson Model: S 1135 Last Use: Brewery Dimensions: 4 x 4 x 7 Condition: Good Last used for 12oz. glass bottles, Stuffs (4) 6 Packs into 24 count motherboard RSC Case, Interconnecting Conveyor with Advancing Brushes included, Year 2001, Stuffer packs up to 30 cycles/minute, Good Condition – well maintained, 460 volts, 3PH, 60HZ
I have around 300+ sixtels and 40+ Half kegs available for sale. All plastic. They are in fine condition and have served us pretty well. We no longer need them as we have increased our fleet of steel kegs. Asking Price $20 per sixtel $30 per half Will accept other offers if bought in larger lots. Buyer to handle shipping. Thanks.
Complete Laser Extraction Unit includes vacuum pump, suction hose, cable assemblies, spare air filters, IP 56 Stainless Steel Enclosure with four (4) casters, 120 VAC. Last calibration 2013. Worked great until removed from service around 2016.
Quantity of two (2) Vision Inspection Station (were used for full case verification) Worked perfectly until removed from service in 2011 120 VAC Cost = $ 700 each, if both are purchased the price drops to $ 600 each.
Item Type: Can Filler Manufacturer: Crown – Angelus Model: Uniblend 72 – 120L Last Use: Soft Drink Dimensions: 20x8x8 Condition: Fair Last ran soft drinks on 12oz. cans up to 1100 cans per minute, Setup for 202 lids, Missing In-motion timer, Includes Lube Panel and Control Panel with Allen Bradley MicroLogix 1100 PLC, Tipless Valves on Filler, Mounted on Common Frame
Item Type: Case Erector Manufacturer: Pearson Model: R208 Year: 2004 Last Use: Beverage Dimensions: 20 x 6 x 8 Condition: Good Unit was purchased new in 2004, Allen Bradley SLC 5/04, Infeed Blank Hopper, Nordson ProBlue Glue Unit, Speeds up to 30 Cases/Minute, Makes cases from 10 inches to 23 inches in length, 5.00 inches to 16.00 inches in width, 5.50 inches to 22.50 inches in depth, adjustable machine, 460 Voltage, 60HZ, 3PH, In Production up to April 2019
Vacuum Lift System includes: Becker Vacuum Pump, TAWI 70 pound capacity quad suction (for flat objects) and vertical jib pivot post ( $1,500 )Hot
Great Condition 70 pound capacity vacuum lift system. Was in operation for less than 2 years, been stored indoors since 2011. Includes all components to safely lift, pivot to a new position, and lower flat objects less than 71 pounds. All hoses and air prep. equipment included. Cost = $ 1,500.00 or best offer
PAI 6251 Palletizer Company: Production Automation Incorporated, Montgomery, AL Our 6251 was built in 1995. It was taken back into the manufacturer at Montgomery and refurnished (6251R) in 2005. It has a PLC 5/11 and that can be upgraded to a 5/20 if needed (this just adds more memory). Here is what was done during the refurbish in 2005 (6251R): • Modified to handle 48x40 and 36x36 pallets- End Load pallets • Add a finger pushover • Rebuilt the divider • Complete check out of the electrical controls • Repaint the palletizer • Replaced the platform/catwalk • PLC remained an AB 5/11 with a 10" color touch screen • Replaced the turning pan assembly • Replaced/ upgraded the apron assembly with a UHMW Apron • Provided a new one station full pallet outfeed We purchased the machine and installed it at our plant. We replaced and updated the following: o...
Labeller Center Pivot, New Old Stock (NOS), still in the original packaging. Minor rust that can easily be cleaned
Item Type: Complete Beer Can Filling Line Manufacturer: Palmer Canning Model: 24-4 Year: 2017 Last Use: 12oz. and 16oz. cans Dimensions: Available upon request Condition: Very Good Palmer rates this line at 200cpm, capable of 12oz, 16oz, and 19.2oz. In production for 12 and 16oz only. The can line is rated for 180-200cpm. Last in use around 100-150 cans/minute. Line was purchased new in 2017 for $570,000. Machinery still in use until sold. Buyer pays for rigging and shipping expense. Features the following assets: EMPTY CAN DE-PALLETIZER AND IN-FEED CONVEYANCE (Items 4.1 – 4.5) De-Palletizer (Item 4.1) De-Pal Discharge Conveyor & Single Filer 18” x 180” (Item 4.2) Mass Flow Conveyor 44” x 56” (Item 4.3) Compact S-Line Empty Can Ionized Air Rinser & Gravity Drop Fittings (Item 4.4) Filler In-feed Conveyor 3.25” Table Top (Item 4.5) CRAFT BLOC 24/4 FILLER & SEAMER (Item 4.6) Seam Measuring & Set Up...
Item Type: Carrier Erector Manufacturer: Pearson Model: BE60 Serial: 201310011343RF Year: 2013 Last Use: Cidery Dimensions: 10 x 2 x 6 Condition: Like New Purchased new in 2013 – last running at Cidery plant, Very Good Condition, Can erect four, six, and eight pack carriers at speeds of up to 60 carriers per minute, Allen Bradley Controls
Krones Cold Glue Bottle Labeler is now available. Great condition, quality German manufacturing. Many spare parts included and we can assist with install and training. Packing and Freight is the buyers responsibility, ships from Nor Calif. Asking price is open to discussion, call or email. For more specs and other contact info visit us here soundbrew.com/krones-robusta-labeler/
Item Type: Tray Packer Manufacturer: Kayat Model: TP-50 Serial: 141-95 Year: 1995 Last Use: Soft Drink Dimensions: 25x6x6 Automatic medium and high speed tray former and packer for loose cans or 4–6 pack high cone cans into trays, Operator Free, Packs into corrugated trays, Soft Start Operation, 460 Volts, 60HZ, 3PH, Last running 12oz. soft drink cans in 24 pack loose and 4-6 pack high cones at 1000 Cans/minute, Last in Operation 2014, Nordson Glue Unit included
Item Type: Handle Applicator Manufacturer: PakTech Model: CCA 600 Serial: CCA 600 03-03 Year: 2014 Last Use: 12oz. and 16oz. and 20oz. cans Dimensions: 16 x 5 x 8 Condition: Excellent Dual Lane Infeed Setup for 12oz, 16oz and 20oz. cans Capable of processing up to 600 cans/minute Operator required for manual loading of handles Tool-less changeover between handle types Stainless Steel Construction Safety Lock Features on Doors Allen Bradley CompactLogix L36ERM (5) Allen Bradley 525 VFD Drives Allen Bradley 1500P Operator Touchscreen 240 Volts, 3 Phase, 60 Hertz