Used Packaging Equipment

Classified Ad Posted 1 week ago in Used Packaging Equipment by Scott_Roth (9308 views)

Originally purchased for $240,000 this line is a must sell to make room for a new packaging line taking its place.  Now is a great time to get into glass with the added global constraints on can supply.  This comac line has run reliably for 3 years and consistently puts out bottles with sub 40 ppb O2 levels. Item: 2016 COMAC 12/12/1 Rinse Fill Crown (Monoblock) Serial No: Output: 2,700 Bottles Per Hour Configuration: 12 oz. longneck glass bottles. Can be configured to run other sizes with additional change parts. Product Flow: Left to Right Hardware: Siemens® S7 PLC. Electrical: 240V, 3 Phase, 60 H Pack On: 4 wide motorized conveyor Conveyor: 40’ of straight conveyor belt, with motor drives. Labeler: In-Line® Paradigm 700 pressure sensitive labeler. Currently configured for full wrap label. Includes trunion change parts for front and back label application. Date Coder: Anser® U2 date coder. Spare...

Classified Ad Posted 4 weeks ago in Used Packaging Equipment by Winslow Sawyer (3425 views)

Up for sale for sale is a Twin Monkeys Animas five head canning line with full sized manual depalletizer, twist rinse and Squid Ink Streamline 5 Spray Date Coder. This line was acquired in a brewery acquisition, but we already have a canning line, hence the sale on this barely used line. The line is in good condition and comes with everything you need to start canning 12 or 16 oz cans. The line has low hours on it with only 6000 cases through it (equal to canning once a week for 6 months). The previous owner said they were able to operate the line with two people and runs around 30-50 cans per minute depending on product. This unit is ready to go and doesn't need the rehab and TLC that you see with a lot of units on this site. Skip the manufacturer wait times (12 plus weeks)...

Classified Ad Posted 1 week ago in Used Packaging Equipment by Daniel Holloway (3936 views)

Year and a half old Meheen M6 bottling line. Our business has scaled and we no long use it. Used for a small Kombucha company. This is the latest machine with latest operating software and mechanics. When we purchased Meheen didn't have a spec sheet on it with the latest technology. Currently set up for 12oz wide mouth stubby bottle. Similar Specs can be found here- chrome-extension://oemmndcbldboiebfnladdacbdfmadadm/https://wildgoosefilling.com/wp-content/uploads/2019/09/WGF_BottlingBrochure_2019-Q4_SpecSheet.pdf Latest generation 6 head filler No capper, just fills bottles. Currently set up for a wide mouth 12oz stubby bottle.   Asking 40k. We will handle all change parts necessary to fit your bottle. Machine will be shipped from Maheen location after parts are made and ready.

Classified Ad Posted 2 weeks ago in Used Packaging Equipment by André Larouche (1874 views)

Around 15 000 sleeved cans for sell. mostly Crown cans but a pallet of Ball. price to be discussed. Items location: Quebec, Canada larouchnikov@lecountryclub.ca

Catalog Ad Posted 2 months ago in Used Packaging Equipment by Sound Brewing Systems (11754 views)

Price Dropped! 1995 CIMEC, Italian built, 12-Head short tube filler. Well made, this machine includes double pre-evacuation, vacuum pump & conveyor motor. Rinser is contained in 11' long cabinet, twist rinser.  The rails are set for 12oz long neck bottles, includes liquid return/recycle basin with screen and pump. AROL single head capper. Misc change parts ARE included plus the conveyor sections.  You will need pack on & pack off tables, and a little TLC to get this back into production status. This bottle filler system will be great for your Kombucha, specialty beers, sours and the like.  Motivated to sell, call or email to discuss. The photo does not do it justice; it can come back to life and functionality with a little work.  more pics to come!

Classified Ad Posted 3 days ago in Used Packaging Equipment by mickshouse1 (47551 views)

CBK Filler IFC 6-6 Automatic Filler and rinse table for sale.  Fully automated counter pressure filler for filling 12 ounce long necks and 22 oz bombers. Double evac CO2 and automatic crowner.  Comes with a 24 bottle rinse table for both sizes.  Currently set for 12 oz but can be changed out for 22 oz bottles.  We achieved a fill rate of approximately 12 cases an hour.  Manual load in and out of bottles. Machine works great and has been lightly used!  Original list price was $60,000 new. Asking $24,500. You pay shipping from Reno, NV (89511).  We will ship in the original manufacturers crate.    

Classified Ad Posted 1 day ago in Used Packaging Equipment by Rich Hennosy (18629 views)

This Meheen bottle filler and labeler was custom made for stubby bottles. It can be modified by Meheen/Wild Goose to fit any bottle. Everything works as it should. Very compact and mobile. Meheen/Wild Goose has great detailed videos that demonstrate how to use it. Great tech support. This is available immediately along with the name of a bottle supplier with bottles in stock. Bag of replacement parts included. Make your bottles stand out on the  shelf. Start bottling next week. We will palletize and ship as soon as this week.

Classified Ad Posted 3 weeks ago in Used Packaging Equipment by Matt Simonds (2151 views)

For sale is 5-head Wild Goose canning line (WG5).  This line was purchased new and installed in spring of 2019. We are upgrading to a larger line - this one is available immediately.  We were able to consistently achieve speeds of 40 cpm and could reach as fast as 50 cpm. Includes inlet pressure and temperature monitoring, standoffs for 375 mL, rinse & air tunnel, and manual sweep whale tail. Price $100,000 FOB 87104.  Pickup would be cheapest, but we can crate/palletize if necessary.

Classified Ad Posted 7 days ago in Used Packaging Equipment by Red Rover (1795 views)

We are upgrading to a monoblock with a capper and need the space. The rinser is a 12 head Poggo with intelligent on-off multiple change parts and auto height and speed adjustments. The filler is a 24 head ICfilling counterpressure unit with multiple change parts, recently overhauled fillerheads, fully rewired and rebulit. $30K for both or best offer. Can be paletised and rigged for a little extra. Can assist with sourcing shipping. Contact for more info.

Classified Ad Posted 1 week ago in Used Packaging Equipment by chris michner (1646 views)

Meheen 6 Head filler for sale. Manufactured in 2013. Very well maintained. We are just moving more to cans and don't have a need for this machine anymore. We were able to get TPOs well under 50ppb with every run and the "pulse" function this machine has. Upgraded with the larger cap hopper. Just put brand new fill tubes on. Fills 12 oz bottles and I can get you the spec sheet if you need it. Pneumatic 6 pack erector! Tired of popping those bottle 6pks open by hand? Well, it's your lucky day! Just feed a stack into the hopper and hit start. The machine will index one forward and open it with the power of suction. Then it will pop the tab in place and when it indexes the next one, it will push the finished one out for you to stuff into a case. Save time! Save energy!...

Classified Ad Posted 3 weeks ago in Used Packaging Equipment by Tait Russell (3836 views)

2014 6 head Meheen M6 Q series  $30,000.00 Set up for 12 oz longneck bottles.  Run up to 50-60 Cases per hour. Buyer pays and arranges freight.    

Classified Ad Posted 1 week ago in Used Packaging Equipment by whalers (6868 views)

Upgrading to a Krones rotary this Winter which means it's time to bid farewell to our trusty Cask ACS X2. We came from a Cask ACS 5 head filler, were debating a rotary at the time, but ended up going this route and it's been a monster in terms of machine cost vs case output. Typical day is a 1,000 cases and it's no sweat. This was rebuilt in 2019 with all new parts from the factory, is in excellent condition, is currently in operation, and will be pulled from service mid-February. Included in the sale is the filler / seamer, 12 oz twist rinse, and a full assortment of spare parts.

Classified Ad Posted 2 weeks ago in Used Packaging Equipment by Jeremy Kuntz (1972 views)

This Martin Robotics 8 head bottle filler is a beast.  It will bottle any size from 187ml up to 750ml and bombers.  Includes collection table and a labeler.  It’s been used only a handful of times by the original owner.  We purchased two years ago but we haven’t been able to clear out room to set it up.  Would like to switch it up and buy a smaller mobile canning line.  The pictures below are of the bottler sitting in storage.  Happy to answer questions and willing to deal.  We just need it out of our way,

Catalog Ad Posted 4 months ago in Used Packaging Equipment by Front Range Fabrication (6852 views)

Currently accepting offers for complete line. Detailed specs available by email. Components listed below. Would be willing to sell individual units or trade for higher capacity can line. We can package, transport, and install. Please request quote if needed.   PALMER COMPACT MONOBLOCK 45 CPM 12 HEAD ROTARY FILLER: SKA DEPALITIZER: Can-i-Bus Depalletizer - S/N 0420-328 MARKEM-IMAJE 9410 Inkjet

Classified Ad Posted 1 day ago in Used Packaging Equipment by Jon Treloar (747 views)

Very good condition 8’3” x 27” wide conveyor/accumulation table.  120v, built in speed control.  Adjustable feet.

Classified Ad Posted 2 weeks ago in Used Packaging Equipment by Kelsey Hendricks (1854 views)

We are selling our lightly used Accutek Semi-Automatic Pneumatic Bench Top Capper with a foot pedal controller. After switching our packaging from glass bottles to aluminum cans, we no longer need the capper. The AccuCapper and its tabletop operation allows for manually placed caps on bottles to be accurately and automatically tightened with greater torque than handheld models. Designed to handle most bottle types including P.E.T, P.V.C, plastic, and glass. Key Features: 110V QuickTurn adjustable torque 304 stainless steel/aluminum construction Tool-less change over Pneumatic motor drive Automatic diving head Foot pedal operation Tool-less height adjustment Reversible for uncapping operations Dimensions: Length: 24” (61 cm) Depth: 8” (20.3 cm) Height: 12” (30.4 cm) --------------------------------------- Weight: Approx. ~30 lbs. (13.6 kg) --------------------------------------- Product Speed: Up to 30 CPM --------------------------------------- Cap Size: 22-90mm --------------------------------------- Air Requirements: 80-100 PSI @ 2 CFM --------------------------------------- Torque Range: 45-145 in. lbs. -------------------------------

Classified Ad Posted 2 weeks ago in Used Packaging Equipment by Coleman Cassel (1854 views)

Like new bottle capper. Minimal use. Works great! Serious inquiries only please. Available now.

Classified Ad Posted 3 weeks ago in Used Packaging Equipment by Matt Simonds (2009 views)

Alpha Brewing Mini-Gun PakTech applicator, used in tandem with WG5 canning line.  Capable of Quad Pak and 6-Pak configurations.  Available immediately. $10,000 FOB 87104

Classified Ad Posted 1 week ago in Used Packaging Equipment by Nobl Cold Brew (1456 views)

For sale is a used shrink bundler. This unit was used for 6, 12, and 24 pack trays. The incoming rails are adjustable based on your tray height. We have run 8.4oz-16oz cans on this line without issue and the height should accommodate up to 19.2. Operation is very simple. The operator loads cans into trays, and then places the trays on the incoming conveyor. A heat knife comes down to cut the film and attach it together. The tray then moves into the heat tunnel, where it shrinks over the tray. Branded films can be used to improve finished case appearance and secure the product. Older machine, but we found that parts (if needed) were readily available. It is a conveyor and heating elements, so not a lot to go wrong here - a real workhorse. We are moving to cartons so we are selling this. Only about 10K...