Grain Storage and Handling Equipment

Reset - Viewing: Used Product Ads, Category Grain Storage and Handling Equipment

Used Product Ad posted 23 hours ago in Grain Storage and Handling Equipment by Scott Denhart

Super sack unloader, low headroom with load cells 8K,  specialty malt hopper 750 dollars, and auger 1K.  These can be parted out.

Used Product Ad posted 23 hours ago in Grain Storage and Handling Equipment by Jackwk5

We are selling a mix of new and used milling and grain handling items. New: 6,000 lb capacity Grist Case 4 Load cells for grist case Used Motor and drive for 6"(believe this is actually Din 150) with pipes, chain and disk. Motor and drive for 3"(believe this is actually DIn 85) with pipes and disk Kunzel 4 roller mill, about 1200 kg/hr max speed 2 grain hoppers with motor and auger to feed chain and disk   Contact Jack @ jacksabby.com for more information.  

Used Product Ad posted 7 days ago in Grain Storage and Handling Equipment by Daniel Diaz

Malt Mill model XW-G3. 500 kg/hr capacity, 1.5 kw motor, 208v-240v 3 phase power. Brand new. Buyer pays shipping. $2500.00 Contact Travis Smith via email to Travis@twelvetalons.com with the subject line “Grain Mill”.

Used Product Ad posted 7 days ago in Grain Storage and Handling Equipment by Michael Killgore

Free was used for malted barley for brewing beer, has to be taken apart to remove from building. Holds 48000 lbs of malt. You can take the auger too. 1. ALL of the equipment to move this tank without damaging the floor of a warehouse, lift onto a trailer, and haul the tank. 3. Experience in rigging. 4. Proof of business’s liability insurance. Free but you must remove from the warehouse and load it yourself with your own equipment.

Used Product Ad posted 7 days ago in Grain Storage and Handling Equipment by Josph Hallock

Flex-Flo Model 500 grain auger.  Approximately 60 feet of coil, drive motor and boot/ transfer plate for hopper. Operates on a 20 amp 220V circuit. Uses Flex Flo 500 PVC pipe which can be ordered from Flex Flo to fit your layout. The bearing and end unit have been replaced.

Used Product Ad posted 1 week ago in Grain Storage and Handling Equipment by irishod89

FeedPro Grain Weighing Systems: 3 available, asking $2,500 each Used to weigh grain from the bulk silo and bag stand/tote assembly. They have an internal auger and weigh scale. They control the flow of grain accurately and handle a flow rate of up to 7,200#’s/hour. Purchased new in 2014. Approximately 37" x 13" x 48" Also available is the main computer box that controlled all three although you don't necessarily need this incorporated, they can be run on their own. It was used to control and relay signals to the mill, etc. Additional photos available upon request.

Used Product Ad posted 1 week ago in Grain Storage and Handling Equipment by Joshua Johnson

Used Flex Auger without PVC pipe, Will need some fixed wiring. USED CONDITION

Used Product Ad posted 2 weeks ago in Grain Storage and Handling Equipment by Stoney Head

2 Roll grain mill for sale, side by side 14" rollers, hopper on top, grain shoot on bottom, adjustable crush size, access panels for easy cleaning, must have 208/230V 3 phase power supply, 26A.  We purchased this brand new in 2013 and it has been a workhorse for our brewery.  Currently set up for plug in to run but can easily be converted to a wall switch.  New drive belts replaced 2019.  Comes with back up belts.  Weighs roughly a ton (2000 lbs). PRICE REDUCED $3000.00 You pay shipping from Reno, Nevada (89511)

Used Product Ad posted 2 weeks ago in Grain Storage and Handling Equipment by Bobby Myers

Brand new Grist case manufactured by SK Škrlj in Slovenia for 7-10BBL brewhouse. Was included in our brewhouse purchase but we do not have the vertical space for it. Still wrapped and palletized and ready to ship.   Description from Manufacturer: Nominal volume in l: 360 Nominal volume [bbl]: 3 Material: EN 1.4301/ASTM304 External visible surface is brushed with SCOTCH BRITE material. Final roughness isn't defined. Brushing leads to a uniform and aesthetic surface quality. Internal product contact surface is a smooth, bright, and reflective 2R (BA) surface without further treatment. Stainless steel is protected against scratches with protective film.

Used Product Ad posted 2 weeks ago in Grain Storage and Handling Equipment by Alia Midoun

Brewery Model Bulk Bag Unloader INCLUDES: Bag pickup frame - forklift model 3" square tubular frame - powder coasted carbon steel construction. 36" x 36" surge hopper featuring: 16" dia inlet, 2" dia. vent connection, 4" dia TC discharge. 4" penumatic gate - 110V Solenoid, 4" TC In/Out Requires 60 PSU of regulated compressed air. This link includes more photos, measurements and original drawings.   In good working condition. Removed due to upgrade to Silo, and opening up floor space in production facility. Last operated March 2024.

Used Product Ad posted 2 weeks ago in Grain Storage and Handling Equipment by Jason Hansen

Engl 2 roller mill in good condition. This will be available mid-summer 2024. Local pickup, or buyer arranges shipping.

Used Product Ad posted 2 weeks ago in Grain Storage and Handling Equipment by chad phillips

1200L grist hopper with 30° exit for auger. (Auger is available also for additional cost)

To top