Kegging Equipment

Reset - Viewing: Used Product Ads, Category Kegging Equipment

Used Product Ad posted 1 day ago in Kegging Equipment by Jordan Smith

Hi all, Premier keg washer available in San Diego county and ready to ship! 240 V, 3 Phase, 12.5 amps 3 KW immersion heater w/ digital thermostat set at 150 degrees F 7 x manual valves, 2 x Sankey valves, 1 x DEMA sanitizer dosing valve 0.75hp wash pump and control panel with digital temperature controller Maximum temperature rating for the hose supplied with the unit is 150°F

Used Product Ad posted 4 days ago in Kegging Equipment by Gene Barzizza

This keg washer / filler has been used little and saves cleaning and filing labor.  The unit should be fully functional although (at this price) the unit is being sold without warranty.    

Used Product Ad posted 4 days ago in Kegging Equipment by Morgan Smith

Sankey III Keg Washer/Racker (4 station, 230/3/60) (Stock Code YKEGWSH-3P 4STN) Stainless steel construction c/w glass bead finish Fills one to four kegs simultaneously Cleans one to four kegs simultaneously Stainless steel centrifugal pump Portable on two rigid castors Large solution tank with cover and heater Pump motor starter & switch pre-mounted for easy hook-up Fills 40, cleans 28 kegs per hour. Oil free air at 7 - 15 SCFM @ 40 psi REQUIRED Water at 50 - 70 psi and 40 - 70 GPM REQUIRED Full load amperage 22Amps, 208 Volt, 3-phase, 60Hertz Buyer responsible for any shipping charges.

Used Product Ad posted 5 days ago in Kegging Equipment by Hkw8599

For sale is a keg cleaner, manufactured to remove the keg stem and set any size keg on it to clean.

Used Product Ad posted 6 days ago in Kegging Equipment by Karl Hughes

Keg filling machine used for a short time and has been sitting in the way. Unit works great just don’t have the room for it.

Used Product Ad posted 1 week ago in Kegging Equipment by John Murman

Fully portable and compact design allows for easy maneuvering. Cleans and fills 1/2bbl, 1/4bbl and 1/6bbl kegs with sankey couplers. -4 station designed for optimal throughput  -Simultaneously cleans or fills four kegs at once -Heated caustic/pre-rinse tank with low watt density electric heater -Low-level heater protection to prevent burn out -Fully portable -Stainless steel construction -Supports, cleans and fills kegs from 20L – 50L (1/6BBL – 1/2BBL) -Stainless steel supply pump with wash-down duty motor -Compact design for easy maneuverability -Fills up to 40 or cleans up to 28 kegs per hour (4 station) -Pump Manuel, and comes with new pump seals, including ceramic seal. 220-240 single phase. 5KW Used up untill last year and has been on a storage rack for backup. Works perfectly.

Used Product Ad posted 1 week ago in Kegging Equipment by Eric Addison

Only 1,000 kegs run through it.

Used Product Ad posted 1 week ago in Kegging Equipment by Great Divide Brewing Company, attn: Brian Dunn Dunn

2010 COMAC 2T Semiautomatic Keg Washer/Filling Line 2 head machine First head - Step 1: Purge with air, Step 2: CIP, Step 4: Rinse Second head - Step 1: Sanitize with steam, Step 2: Purge with CO2, Step 3: Fill Uses steam to sanitize.  Can run on high-pressure or low-pressure steam.  We were running it at 10-14 PSI. Siemens PLC Steam heated CIP reservoir Stainless Keg Chute Stainless CO2 pressure reducer Stainless air pressure reducer Cast Iron steam pressure reducer Cleans and fills 24 1/2 BBL kegs per hour, or 40 1/6 BBL kegs per hour when operated with 10-14 PSI steam.  Speed increases significantly with higher pressure steam. 240V, 3 Phase, 60 H We operated this keg washer/filler for 13 years and we just decommissioned it.  It works really well and is well maintained, though it shows signs of use. We have spare parts, manuals, and copies of all...

Used Product Ad posted 1 week ago in Kegging Equipment by Charlie Engel

Kegco XCK-2460B Commercial-Grade Draft Beverage Dispenser in great working order.  Holds 3 full-size kegs or a combination or smaller kegs.  Twin towers with 8-tap capacity, keg couplers, Co2 regulator and hoses included (tap handles not included).   Forced air refrigeration with digital adjustable thermostat keeps beverages ice cold.  Two built-in drip trays catch drips/spills and route them to an external drain. Constructed of sturdy steel with a smooth black exterior finish and an attractive stainless-steel top.  Designed for built-in or freestanding applications (cooling unit accessible from front of unit) and has internal lighting. https://www.beveragefactory.com/images/guides/XCK-24-manual_V2_21.pdf        

Used Product Ad posted 2 weeks ago in Kegging Equipment by Karl Eicher

Gently used Squire 2 Keg Washer/Filler. This thing is a beast and can handle a high level of production for a two-head washer/filler. Comes with all valves, pumps necessary to operate immediately.   Buyer to arrange shipping   Email karlmathiaseicher@gmail.com for inquiries  

Used Product Ad posted 2 weeks ago in Kegging Equipment by chris Sanders

Alpha Keg washer for sale $8,000.  Excellent condtion

Used Product Ad posted 2 weeks ago in Kegging Equipment by Adam Frantz

This 2-head manual keg washer is a workhorse. It has served our brewery for 8 years. It has 2 basins that are independently plumbed so you could wash with just caustic or do a caustic, then rinse, then an acid wash as well. It has an inline venturi valve on the cold water inlet for use with a sanitizer of your choice. We used oxine. It does require 2-220 V power supplies. One to run the basin heater (with automatic temperature regulator set to 65 degrees C) and the other to operate the 1.5 hp pump. It has quick disconnects for compressed air and CO2, and comes with standard American Sankey valve couplers. It washes about 10 kegs an hour with an experienced user. I will also include operating instructions. It is in good working order, we just upgraded to a semi-auto unit that is a little more hands off....

To top