Grain Storage and Handling Equipment

Reset - Viewing: Used Product Ads, Category Grain Storage and Handling Equipment

Used Product Ad posted 3 days ago in Grain Storage and Handling Equipment by Josph Hallock

Flex-Flo Model 500 grain auger.  Approximately 60 feet of coil, drive motor and boot/ transfer plate for hopper. Operates on a 20 amp 220V circuit. Uses Flex Flo 500 PVC pipe which can be ordered from Flex Flo to fit your layout. The bearing and end unit have been replaced.

Used Product Ad posted 7 days ago in Grain Storage and Handling Equipment by DESTIHL BREWERY

For Sale:  12" Pneumatic Knife Gate Valve, rated for 150 psi, crated, in like-new condition. Terms: $300.00.  Already crated and available for immediate shipment. Price is as-is, FOB Normal, IL (i.e., Buyer responsible for freight/shipping).  100% non-refundable down payment via bank wire to secure purchase and prior to loading/shipping. Viewing by appointment only. To schedule an appointment to view or to obtain more information or to otherwise submit an offer, please email only serious inquiries to office@destihl.com (replies to this post on-line will not be routinely checked).

Used Product Ad posted 4 weeks ago in Grain Storage and Handling Equipment by Wyatt Barger

We are selling a used 992 lb. capacity Newlands grist hopper that was made in Canada (manufactured in 2008), used in good condition. The unit has been used as recently as October 2021. Please contact for any more information you may require, we are open to any discussions and offers about the unit. Buyer is expected to pay for shipping.

Used Product Ad posted 4 weeks ago in Grain Storage and Handling Equipment by ABM Equipment

Pictures are too big for the site, go here to scroll the gallery (arrows are hard to see). Briefly-used grist case from the distilling industry with air flow-assist configuration. Free of defects with Ø11″ inlet, Ø6″ outlet, and Ø4″ dust port. Click here to view full drawings and dimensions. Go here for general information about our grist cases. Volume 450 Cubic Feet Capacities Liquid – 3,172 Gal | Grain – 11,436 lbs. Materials 304 Stainless with 2B outer finish and sanitary interior finish Dimensions 132 9/16″ H, 110 1/4″ W Weight 1,876 lbs. Made In USA Price $18,000

Used Product Ad posted 3 weeks ago in Grain Storage and Handling Equipment by Bobby Myers

Brand new Grist case manufactured by SK Škrlj in Slovenia for 7-10BBL brewhouse. Was included in our brewhouse purchase but we do not have the vertical space for it. Still wrapped and palletized and ready to ship.   Description from Manufacturer: Nominal volume in l: 360 Nominal volume [bbl]: 3 Material: EN 1.4301/ASTM304 External visible surface is brushed with SCOTCH BRITE material. Final roughness isn't defined. Brushing leads to a uniform and aesthetic surface quality. Internal product contact surface is a smooth, bright, and reflective 2R (BA) surface without further treatment. Stainless steel is protected against scratches with protective film.

Used Product Ad posted 1 week ago in Grain Storage and Handling Equipment by Jeff Tobin

This 60,000 lb. (approx) capacity Meridian silo is in very good condition. It has smooth steel walls and a smooth conical bottom. It was new in 2007. We bought it used in 2018. Unfortunately we have been unable to find a way to make it work with our brewery configuration and have decided to sell it. The price includes a choretime screw auger conveyor with approximately 50 feet of pipe and auger. As seen in the pictures the silo is on its side and ready to load onto your truck. Buyer is responsible for rigging and for crating up or otherwise packing the choretime components. Overall tank dimensions (approximate) 12' diameter, 27' height.  

Used Product Ad posted 3 weeks ago in Grain Storage and Handling Equipment by Wesley Parker

Due to permitting issues with a spent grain silo, we scrapped the project. The Xeric pump is brand new and has been stored in our warehouse since 2020. Xeric Progressive cavity pump: Model 92824GHH, 4" Spent grain discharge pump for 15-30 bbl system. 10 HP TEFC Motor 230-460/3/60 Stainless spent grain piping: 140' 4" 14 ga. 304 stainless steel tubing 5 ea 4" 90 degree 14 ga 304 ss elbows 24 ea 4" TC Ferrules 12 ea 4" High Pressure clamps with gaskets Original package purchase price: $36,440.00 Located in Anaheim, CA

Used Product Ad posted 4 weeks ago in Grain Storage and Handling Equipment by James Dugan

Excellent working condition.  Available for local pickup in Portland OR, or via freight shipping. Will accept reasonable offers. Ponndorf Wet Spent Grains Conveyors offer a safe, clean, efficient, and low-maintenance solution for the removal of spent grains. Unlike most other spent grain removal systems on the market, the Ponndorf is not a pump; it is a pneumatic conveyor that utilizes compressed air to move the wet spent grains away from the lautertun. The Ponndorf design concept has changed little in the company’s nearly 120-year history and provides a low-maintenance alternative to other available systems. Spent grains conveyors are available in a broad range of sizes; from the mobile, plug-and-play PONYfant-for pub breweries, to the Type 100 and Type 150- well suited for the craft breweries. Engineered, designed, and built in Germany, regardless of your brewery’s size Ponndorf has your spent grain removal needs covered. Durable, low maintenance wet spent grains...

Used Product Ad posted 3 weeks ago in Grain Storage and Handling Equipment by Jason Hansen

Engl 2 roller mill in good condition. This will be available mid-summer 2024. Local pickup, or buyer arranges shipping.

Used Product Ad posted 1 week ago in Grain Storage and Handling Equipment by Daniel Diaz

Malt Mill model XW-G3. 500 kg/hr capacity, 1.5 kw motor, 208v-240v 3 phase power. Brand new. Buyer pays shipping. $2500.00 Contact Travis Smith via email to Travis@twelvetalons.com with the subject line “Grain Mill”.

Used Product Ad posted 3 weeks ago in Grain Storage and Handling Equipment by chad phillips

1200L grist hopper with 30° exit for auger. (Auger is available also for additional cost)

Used Product Ad posted 3 weeks ago in Grain Storage and Handling Equipment by Kyle Wilson

We are selling our two FormPak super sac/bulk bag malt loading stations. These are equipped with isolating valves for safe bag openning and bag hoist for easy staging and loading. Rigging and shipping costs are buyers responsibility. Brooklyn Brewery will assist in coordinating with our local rigging contractor. Please email Kyle (kwilson@brooklynbrewery.com) for additional information or to make an offer. Thanks for your interest!

To top