Grain Storage and Handling Equipment

Reset - Viewing: Category Grain Storage and Handling Equipment

Used Product Ad posted 2 days ago in Grain Storage and Handling Equipment by Pugs13

Barely Used Portland Kettle Works Maltmaster Mill - 7bbl - 15bbl Adjust the crush of your grain on the fly. LIKE NEW & Small footprint. Auger motor is a 3 phase - 3/4hp unit. The augur comes with PVC piping that is set up for roughly 15ft at 45 degrees from mill and then runs straight for an additional 30ft to our mash tun, so overall the auger is roughly 45ft of line.  Again, all this comes with the purchase.  Brand new this was $17,000.  I am looking to get $14,200 OBO. Looking to downsize and needs to go!  Buyer must line up shipper and pay all shipping costs.

Used Product Ad posted 3 days ago in Grain Storage and Handling Equipment by Josph Hallock

Flex-Flo Model 500 grain auger.  Approximately 60 feet of coil, drive motor and boot/ transfer plate for hopper. Operates on a 20 amp 220V circuit. Uses Flex Flo 500 PVC pipe which can be ordered from Flex Flo to fit your layout. The bearing and end unit have been replaced.

Used Product Ad posted 3 days ago in Grain Storage and Handling Equipment by Robert Ryan

NEW (Unused) Suspended Grist Case Designed for a 5 BBL system Manufactured by YoLong Brewtech Stainless steel Drawings are available Compare at over $3,000 USD for NEW   Price and Shipping Info $990 USD Payment in equivalent Canadian currency can be negotiated INCO terms: EXWORKS (Windsor, Ontario, Canada) Shipping and handling not included

Used Product Ad posted 3 days ago in Grain Storage and Handling Equipment by Robert Ryan

Used (Refurbished) Milling Machine Brand/MODEL: AUTOMATIC LPE500 Serial #: 991036840 Roller Type: 8 teeth per inch Roller Condition: Good – some damage Made in the USA Refurbished in Canada New bearings All new powder coatings Updated OEM parts and decals Electric Motor included (used): Made in the USA US MOTORS – FARM DUTY 5 HP; 1,725 RPM; 230V/1PH/60HZ/FLA 29 Compare at over $15,000 USD for NEW machine and motor   Price and Shipping Info $4,990 USD Payment in equivalent Canadian currency can be negotiated INCO terms: EXWORKS (Windsor, Ontario, Canada) Shipping and handling not included

Used Product Ad posted 7 days ago in Grain Storage and Handling Equipment by DESTIHL BREWERY

For Sale:  12" Pneumatic Knife Gate Valve, rated for 150 psi, crated, in like-new condition. Terms: $300.00.  Already crated and available for immediate shipment. Price is as-is, FOB Normal, IL (i.e., Buyer responsible for freight/shipping).  100% non-refundable down payment via bank wire to secure purchase and prior to loading/shipping. Viewing by appointment only. To schedule an appointment to view or to obtain more information or to otherwise submit an offer, please email only serious inquiries to office@destihl.com (replies to this post on-line will not be routinely checked).

Used Product Ad posted 1 week ago in Grain Storage and Handling Equipment by Jeff Tobin

This 60,000 lb. (approx) capacity Meridian silo is in very good condition. It has smooth steel walls and a smooth conical bottom. It was new in 2007. We bought it used in 2018. Unfortunately we have been unable to find a way to make it work with our brewery configuration and have decided to sell it. The price includes a choretime screw auger conveyor with approximately 50 feet of pipe and auger. As seen in the pictures the silo is on its side and ready to load onto your truck. Buyer is responsible for rigging and for crating up or otherwise packing the choretime components. Overall tank dimensions (approximate) 12' diameter, 27' height.  

Used Product Ad posted 1 week ago in Grain Storage and Handling Equipment by Daniel Diaz

Malt Mill model XW-G3. 500 kg/hr capacity, 1.5 kw motor, 208v-240v 3 phase power. Brand new. Buyer pays shipping. $2500.00 Contact Travis Smith via email to Travis@twelvetalons.com with the subject line “Grain Mill”.

Used Product Ad posted 2 weeks ago in Grain Storage and Handling Equipment by michael daly

Used Jimboney Malt Mill. Recently upgraded to a larger mill and auger. Used with a 7bbl brew system. Would work great with that size brew house or lower. Also would be great for homebrew shops. Belt was replaced about a year ago. Easy to adjust tightness and change how fine the grind is. An auger can be hooked up to it, but in the past we were milling into bins and dumping them into our mash tun. Plugs into a standard outlet.

Used Product Ad posted 2 weeks ago in Grain Storage and Handling Equipment by Matt Marple

20lb per minute milling.  Explosion proof Moter on rolling cabinet.  Rollers are barely used and replaced right before it was decommissioned.  50lb steel hopper, has a small channel cut into it where we installed a grain shoot.   $3,000 Buyer is responsible for all packaging and shipping costs from Eagle, CO

Used Product Ad posted 3 weeks ago in Grain Storage and Handling Equipment by Craig Coleman

Grain handling setup. 3 900+ cubic feet grain bins. 2 with rotary valves on bottom, w 40’ of flex auger. Perfect for bringing in truckload quantities of malt.

Used Product Ad posted 3 weeks ago in Grain Storage and Handling Equipment by Jason Bell

Sized for 15 BBL Brewhouse 15 BBL Grist Case fabricated by Alpha Brewing Ops. Designed for floor placement with mill mounted on top and auger mounted underneath. Great condition; no issues.

Used Product Ad posted 3 weeks ago in Grain Storage and Handling Equipment by Jason Bell

Sized for 7 BBL Brewhouse 7 BBL Grist Case fabricated by American Beer Equipment. Designed for floor placement with mill mounted on top and auger mount underneath. No issues with this piece of equipment; in great condition.

To top