Reset - Viewing: Used Product Ads, Category Packaging

Used Product Ad posted 3 days ago in Bottling Equipment by AgerTank

Now Available - A complete filling line set up for glass bottles with an ROPP aluminum closure.  This line ran non carbonated water for a brief time and would be well suited for distilled spirits, water, or other non carbonated products.  Details follow- Item is a used, ABE/Norland model GlassPak 66 bottling line. The line is rated at up to 70 BPM and includes the following: -Tri-Block 12 clamp rinser / 12 valve filler / 6 head capper. The capping heads are 28mm ROPP. The safety guarding package is glass doors w/safety interlocks. Operation of the machine is clockwise (left to right). One set of change parts for glass bottles is included. Previous use was in bottled water facility. Power requirement is 208-240 volt/3-phase. -48" diameter dump/accumulation (pack-on) disk -Infeed conveyor for the Tri-Block rinser/filler/ROPP Capper. -Discharge conveyor from the Tri-Block -Quick Dry 66 air knife external bottle blower -Videojet...

Used Product Ad posted 5 days ago in Canning Equipment by mtnSpirits -

Semi-automatic tunnel pasteurizer. Holds 3 standard trays per cycle. Ergonomic and very efficient design. Side door for easy clean out. Currently set up for single phase supply, but can easily be swapped over to 3-phase. Has 4x 30amp immersion heaters. Takes about 9 minutes to heat the bath from 60F to 165F. Can also be adapted to heat with hot water from plant source or wall hung on demand unit. Set the time/temp and come back 25 minutes later to slide another 3 trays through. Output onto a roller conveyor for minimal labor. Message and I will email videos. Don't have a youtube account right now... All parts from Automation Direct or McMaster so nothing is proprietary or hard to get. You won’t be disappointed!

Used Product Ad posted 6 days ago in Kegs and Kegging Supplies by Schneider Industries

600+ Used HALF BBL Kegs (non-stacking, all American made Stainless Steel) -- that are surplus from a Brewery that did NO Gingers or Sours.  Kegs are all pressure test and recently came back from distributor. Text or email me for more info, addl photos,  a very competitive shipping quote.  We accept Credit Cards or ACH / WIRE. Typically we sell in groups of 24 HB -- however we are OK for local customers to drive in and "hand load" the kegs to save on freight. Text or call me for a SHIPPING QUOTE LTL Text Josh at 314-518-474-one. Or email: jjbuss @

Used Product Ad posted 2 weeks ago in Kegs and Kegging Supplies by Keg Logistics

Several hundred used stackable kegs for sale: Kegs have very few turns on them (lightly used) $72 per keg Full Pallets Only (24 kegs per pallet) Kegs are sold "as is" Valves guaranteed to be functional and hold pressure All kegs include installed RFID tag on top dome Shipping from Indianapolis, IN

Used Product Ad posted 3 weeks ago in Kegs and Kegging Supplies by Schneider Industries

All New 2023 MicroMatic Spears -- Approx (1800) 1/6 Sixtel BBL Stack-able, completely refurbished by a major keg servicing company, Fully Tested, Refurbished Kegs are 6-10 years old with new 2023 MicroMatic Stems, Pressure Tested, Polished, De-Branded, Excellent Kegs. THEY ARE NOW LIKE BRAND NEW KEGS LOCATED IN ST LOUIS, MO STACKABLE SIXTEL 1/6 BBL ($56) MINIMUM ORDER: 60 kegs min. (we can fit 20 kegs on a single pallet and they are triple stacked and stretch wrapped -- Total of 60 kegs) -- (Pay with wire or credit card.  2.5% credit card fee would apply) WE HAVE STACKABLE HALF BBLS ALSO!!! All KEGS are empty and did Ales and IPA Beers ONLY.  (no sour or ginger beer) These kegs are in excellent condition. See photos. TEXT OR EMAIL DIRECTLY  Customer pays all trucking. Call or text 314-518-474-one    Josh — email: jjbuss @ yahoo dot com or joshb @ schneiderind...

Used Product Ad posted 3 weeks ago in Kegs and Kegging Supplies by Schneider Industries

1000+ 1/2 and 1/6 bbl kegs ONLY . NOTE -- The 1/2 are used from 2016, in good condition for $58 each.  The Sixtels are $56 ea and TOTALLY REFURBISHED with NEW 2023 MICROMATIC SPEARS (See our other AD detailing this)   All kegs held pressure, no leakers.  NO SOURS OR GINGER BEERS in these kegs.   $58 for used Half BBLS -- Non Stacking (pressure tested, just came out of service) $56 for Sixtels -- REFURB, 2023 Micromatic Spears,  Non Stacking WE SELL THEM TRIPLE STACKED SO THAT IS -- (24) HB Min order ....or 60 SIXTELS Min Order Again these are these are BOTH STACKING AND NON-STACKING -- Tell us which kind you want... (We also have newly refurbished Sixtel Kegs with brand new 2023 MicroMatic Stems...) TEXT OR EMAIL DIRECTLY  Customer pays all trucking. Call or text 314-518-474-one    Josh — email: jjbuss @ yahoo dot com or joshb @...

Used Product Ad posted 3 weeks ago in Canning Equipment by Shawn LaBrasseur

Fully Refurbished and Audited 30 CPM Palmer Beverage Canning Line and Depal For Sale Complete with 1 Year Warranty from the Manufacturer on Filler/Seamer Completely refurbed Mono-bloc 12/1 head rotary counter-pressure filling system with single-head mechanical seaming (Seamer upgraded to current gen) Fill level accuracy within .20" Fully automatic, highly efficient 30 CPM Fill Rate for 12 and/or 16 oz cans Isobaric rotary, pressure filling Upgraded Gen 3 seam head / seam hub Automatic high-level empty can depalletizer Seamer discharge conveyor Discharge conveyor with 180 degree inversion Filler in-feed conveyor Seamer discharge conveyor 3.25 TTC Misc Spare Parts Air: Compressed Air 125 PSI, 15 CFM Power: 240/120 Volt 60 Hz Three/Single Phase **Original purchase agreement with all specs, invoices of all refurb work, as well as audit report can be provided on request** We purchased this equipment in August of 2023 (Smylie Brothers) and have had it audited, completely refurbished,...

Used Product Ad posted 2 months ago in Canning Equipment by Oktober Can Seamers

OKTOBER DESIGN TRADE-UP PROGRAM LOOKING TO REFRESH YOUR BENCHTOP CANNING SYSTEM? We are happy to credit your used Oktober seamer, in any condition, towards the purchase of a new one! Trade in your SL1, MK-series, or Model 7 towards a new Model 7 or Model 8. Email at or call us at 231-750-1998 to get started.

Used Product Ad posted 2 hours ago in Canning Equipment by James Partridge

Hello all, I have some brewery equipment up for sale on the North shore of Long Island.  More photos will be posted once this site allows it.  In the meantime, photos available upon request.  The equipment is as follows: Cask Global Canning Solutions Canner MCS-V2      $14k. 10bbl Unitank no valves or carb stone  $4250. Variable speed CPE brand CIP Pumps and carts. 2 available.  $1250 each. 3HP ProChillerSystems Glycol chiller $6k. Pallet Jack $250. Please feel free to reach Jamie at in regards to any further questions, information or pictures of equipment. Buyers are responsible for pickup or shipping. Thank you.

Used Product Ad posted 15 hours ago in Kegs and Kegging Supplies by Danielle Crook

We have several hundred kegs available. All with MM spears. Well maintained fleet on an acid washer (no beer stone) All have been used with beer only! No Rootbeer or Wine. 1/6 bbl $50 ea 1/2 bbl $60 ea Discount for more than a pallet. See pics for types of kegs and condition.

Used Product Ad posted 1 day ago in Bottling Equipment by Kevin Mashayekan

Automatic bottling machine by Meheen/Wild Goose Filling. Selling everything needed for a complete bottling line in one package: bottling machine with rinser, continuous thread capper, conveyer belt, rotary accumulation table with collection shelf, 10 hp air compressor and peripherals. Currently set up for custom glass kombucha bottles but can be altered as needed. FOB San Diego, CA

Used Product Ad posted 2 days ago in Canning Equipment by Levi Chagnon

This was purchased new from SKA Fab in 2018 and installed, running only for 6 months before being taken off-line (so it only has 6 months run-time on it). It is currently de-commissioned and palletized (not crated). Here is the link to the SKA Fab Can-I-Bus page for details / equipment specifics. List price of $28,000 does not include CA sales tax (which may be eligible for manufacturing partial tax exemption depending on buyer state) and cost of shipping to destination. Shipping specifics (carrier, speed, trailer type, etc...) are TBD and can be worked out with buyer during purchase process. Email me please if you have any questions or would like additional info.

To top