Cask ACS v4.2 canning line. 35-40 CPM, plus auto and manual depalletizers, twist rinses and change parts for 12oz and 16oz, date coder ( $68,500 )New Featured
Cask ACH Canning Line for sale in Portland Oregon. Thoroughly tested and approved. Many upgrades like HMI touchscreen interface, new parts throughout (we were hunting for an issue with the seamer and replacing every part we touched, turned out to be something stupid!), brand new product lines, a 25′ 4-wire 40amp power cord, and much more. Sale includes an auto depalletizer and an infeed shaker table (or manual depal), both by Cask. 12oz and 16oz twist rinse cages, changeover parts for both sizes. Mathews i-Mark C84 continuous inkjet printer, attaches to twist rinse and hits the bottom of the can with a date code on its way through (up to 4 lines of text), retail $8000. Including several thousand dollars worth of spare parts and several original manuals in 3-ring-binders. We welcome in-person inspections. Unit is ready to pickup or ship, we can handle freight or facilitate your arrangements. Can...
Includes the following: Cask X2 filler. (10 inline fill heads, dual seamer. 75 cans per minute) Bevco conveyors. Roughly 20 feet. MEC infeed conveyor (with shaker table). This conveyor is setup to work with a SKA Can-i-bus depalletizer 1-12 oz can twist rinser 1-16 oz can twist rinser Can rinser/drier 2 stainless steel tables for packing Thousands of dollars of spare parts We purchased it new in 2016. Price is FOB Fernie, BC, Canada.
BASE UNIT + ACCUMULATION TABLE W/ INLINE RINSING SET UP FOR SLIM CANS CHART NITROGEN DOSER AVAILABLE AS WELL This line is expandable at a later date to run double capacity. Target throughput is estimated at 28 cans per minute on the base system, 56 cans per minute after future upgrade. 110v GFCI supply power 20 amp to be provided by user (must be VFD rated) Clean filtered compressed air to be provided by user (6 SFCM minimum , clean, dry and filtered) Co2 for can purge and under cap gas to be provided by user (1/4 tube with quick disconnect) 24 vdc controls package 6” color touch screen for machine control accumulation table with power-feed twist rinse system Operator feeds cans to accumulator table Systems ship standard with rinse water set-up. Customer may modify with pressurized keg sanitizer system easily. Customer supplied sanitizer tanks and plumbing if used...
Complete 60 CPM Rotary Comac 8/1 Can Line with Mechanical Seamer, Depalletizer, High Cone, Switchback and Tray Former ( $320,000 )New Hot
The line we have for sale was purchased new from Comac and delivered to the US in Q3 2012, we have been running it ever since and are very happy with the quality of fill and reliability of the machine. The line includes : Stainless Steel Can Depalletizer : Stainless Steel Operator Platform semi-automatic operation, with automated slip sheet removal Dual Gravity Can Twist Rinser Set up for 12 and 16 oz. cans Comac 8/1 Monoblock Comac custom stainless steel single file conveyors and automation controls Can Rinser Can Turners – (two sets of two) Set up for 12 and 16 oz. cans Comac Stainless Can Dryer Videojet Bottom of Can Coder High Cone Can Carrier Application Unit Model 350 2 machines are included Switchback Brew Pack Jr. Endloader for wrap around 6 pk, 12 pk cardboard Model A1-2H Intermittent Motion Auto Load Cartoner Hartness Tray Former TP-50 Over $35,000...
Two benchtop Cannular beer can seamers, counter pressure can/bottle filler & MYSTERY MACHINE ( $1,400 )New
We are a copacker and have been canning with benchtop equipment, have recently upgraded to an automated line. We were able to fill, seam, and pack about 350-400 cans per hour with 4 people. Lot includes two Cannular benchtop can seamers, one is a few months old and the other came to us used in great shape. Chucks for both 12 and 16 oz cans included, as well as spanner wrench and replacement bearings. Oem springs broke a couple of times and were all upgraded to stainless, have been fine since. The white filler works for cans and bottles. CO2 purge, seals around a bottle neck and can act as a counterpressure system. We only used with cans as we have a bottling line, worked great as a CO2 pushed gravity fill into cans. The stainless filler is a mystery machine - might be the most valuable part of this...
This Meheen bottle filler and labeler was custom made for stubby bottles. It can be modified by Meheen/Wild Goose to fit any bottle. Everything works as it should. Very compact and mobile. Meheen/Wild Goose has great detailed videos that demonstrate how to use it. Great tech support. This is available immediately along with the name of a bottle supplier with bottles in stock. Bag of replacement parts included. Make your bottles stand out on the shelf. Start bottling next week. We will palletize and ship as soon as this week.
We purchased this GAI 1305 Monoblock from the original owner last year, but due to COVID, never ended up commissioning it. We have the fittings for different bottle sizes as well. We have video of it working. Everything as far as we know is working, happy to send additional photos upon request. Manufactured in 2012. See youtube link for actual unit video. Here's the Prospero link for more details: https://www.prosperointernational.it/en/prodotti/gai/monoblocks-series-1005w-1305w-1605w-2005w-2505p-3005p/ Photos are from actual unit in current condition. Ideally would be picked up from our location here in Anaheim, CA (zip 92801). Contact Tony at email@example.com
http://American Canning Machine single head filler with indeed table and auto can seamer, we ran 800 cans on this machine, runs like a champ, selling because Covid hurt our business
Ready to go bottling line! washer, filler and capper Capacity 45-50 BPM depending on bottle size, product and pre-evac bottle size 12oz, 16oz, 22oz beer, cider, carbonated water, etc 230 VAC, 60HZ, 3 phase There is a conveyor and collection tables for the line and labeling. on pallets and ready to ship! MUST SELL ASAP. PRICE NEGOTIABLE
We have a Cask ACS 5 head canner for immediate sale. The seamer is almost all new parts, including the chuck and dies, Cask did the work. Majority of Festo parts, seals, and bearings have been replaced within the past 6 months as well. There is a rinser and air knife attached. Comes with twists for 12oz and 16oz cans. The 12oz one is fitted with a water rinse and compressed air fittings. 30-34 cans/minute. Manuals are included. More pics available.
CBK Filler IFC 6-6 Automatic Filler and rinse table for sale. Fully automated counter pressure filler for filling 12 ounce long necks and 22 oz bombers. Double evac CO2 and automatic crowner. Comes with a 24 bottle rinse table for both sizes. Currently set for 12 oz but can be changed out for 22 oz bottles. We achieved a fill rate of approximately 12 cases an hour. Manual load in and out of bottles. Machine works great and has been lightly used! Original list price was $60,000 new. Asking $24,500. You pay shipping from Reno, NV (89511). We will ship in the original manufacturers crate.
We are selling our trusty cask ACS 4.2 canning line. it has been in operation with us since 2014. Runs between 30-35 CPM depending on can size. easy to change over from 12oz to 16 oz cans. This machine has been great for us but we just need to upgrade to a faster line to keep up with our current production. we will decommissioning the line the week of January 11th. if you would like to see it run and are interested let me know. we have a wealth of in house knowledge and spare parts that convey with the line. we also have a in-line labeler that we would be looking to sell if interested. bearings, chucks and seaming rolls have been replaced in the last month.
9 filler head bottling line fills a maximum of 2200 bottles per hour Pressure dating Labeler for neck and body labels Pack on table and pack off conveyor belt. Water blow off piping can be taken off or included at no additional fee. Fan for this added equipment is currently not working. Any extra parts we have on site including filler heads, pneumatics, comac tool box of parts are all included. No longer need the line due to switching completely to cans. Buyer responsible to crating and shipping. We have a forklift on site to assist with moving. Also posting a Elliot Case erector that was used in tandem with this bottling line, and the pallets of leftover bottles as well. Links will be added soon.
Elliot case erector. Used condition. Secures boxes with tape. We have been running boxes able to hold 24 bottles of beer- 10.5 x 12.5 size boxes. Gravity fed boxes, but it helps if there is a little weight on the back of the stack of boxes to give gravity a little help. Buyer is responsible for crating and shipping. We can assist with loading using our forklift. Do not contact me asking what the price of the item is because I will just assume you are a scammer just like 2 "investors" that already contacted me trying to scam me out of the unit with a fake check.
Complete packaging line available for purchase. Price inclusive of all listed pieces of equipment & spare parts inventory. Fully functioning, in great working condition. 1 x M6 Meheen 6 Head Filler (341ml) 1 x Inline Webmaster 1000 Pressure Sensitive Labeller 1 x RSC Inline 8 Bottle rinser 2 x Accumulation Table 1 x Rotary Table Video available upon request. No reasonable offer refused.
this is a great continous flow injet coder, comes with stand, extra ink and cleaning fluid, an extra sensor and manual. Can palletise and load. buyer resposible for shipping but can assist we getting a quote. $3750 or near offer.
We are selling our Palmer CraftBloc 12/1 (12-heads, 1 seamer) that we installed new in 2014. We've packaged two GABF-winners among the thousands of 202 dia 12 oz cans we’ve filled over the year. For printed cans, we have 3 people on the line (operator, handle-applicator & case stacker). For shrink-wraps, we have someone sitting on a ladder on the de-pal conveyor making sure cans don’t stick. The seamer hub has been replaced recently, as have the seals on the fillers. Current layout and photo attached. Other useful specs: Palmer Canning Fully Automatic, Isobaric Micro-Canning Line for Craft Beer Monobloc - 42 CPM — Turn-Key System Fully automatic Ska Fabricating de-palletizer (3’-9” x 6’-0” x 11’-5”) 9’-6” long In-Line Empty Can Rinse Tank with Gravity Drop Fitting 36” In-feed Conveyor Mono-Bloc 12/1 Head Rotary - Counter Pressure Filling System with Single Head Mechanical Seaming and pre-fill purge nozzles (4’-5” x 7’-1”)...