Used Packaging Equipment

Catalog Ad Posted 1 month ago in Used Packaging Equipment by United Food & Beverage (23358 views)

Item Type: Accumulation Table Manufacturer: Ambec Model: 6 x 12 Last Use: Bottling Dimensions: 6 x 12 x 4 tall Last used in dairy plant for round HDPE Bottles, Stainless Steel Construction with Plastic Belting, Center Drive Motor, Good Condition

Catalog Ad Posted 1 month ago in Used Packaging Equipment by United Food & Beverage (16542 views)

Item Type: Complete Beer Can Filling Line Manufacturer: Palmer Canning Model: 24-4 Year: 2017 Last Use: 12oz. and 16oz. cans Dimensions: Available upon request Condition: Very Good Palmer rates this line at 200cpm, capable of 12oz, 16oz, and 19.2oz. In production for 12 and 16oz only. The can line is rated for 180-200cpm. Last in use around 100-150 cans/minute. Line was purchased new in 2017 for $570,000. Machinery still in use until sold. Buyer pays for rigging and shipping expense. Features the following assets: EMPTY CAN DE-PALLETIZER AND IN-FEED CONVEYANCE (Items 4.1 – 4.5) De-Palletizer (Item 4.1) De-Pal Discharge Conveyor & Single Filer 18” x 180” (Item 4.2) Mass Flow Conveyor 44” x 56” (Item 4.3) Compact S-Line Empty Can Ionized Air Rinser & Gravity Drop Fittings (Item 4.4) Filler In-feed Conveyor 3.25” Table Top (Item 4.5) CRAFT BLOC 24/4 FILLER & SEAMER (Item 4.6) Seam Measuring & Set Up...

Catalog Ad Posted 1 month ago in Used Packaging Equipment by United Food & Beverage (9124 views)

Item Type: Case Conveyor Manufacturer: Ryson Model: 1500-400-A1 Serial: 153911-1 Year: 2015 Last Use: Beverage Plant Dimensions: 77″ Diameter x 144″ Tall   Infeed is 49″ – Discharge is 143″, Elevation Change 94″, 16″ wide belt, Elevates Up Counter Clockwise, 3 Turns, 460 Volts, 2HP Drive Motor, Infeeds and discharges at 180º direction – see PDF drawing below, Last used in a Beverage Plant for Cases, Condition – Very Good

Catalog Ad Posted 1 month ago in Used Packaging Equipment by United Food & Beverage (4517 views)

Item Type: Gripper Rinser Manufacturer: Bevco Model: 610 Last Use: 12oz. Glass Bottles Dimensions: Approx. 15 feet long x 4 feet wide x 5 feet tall   Setup for Water Rinse, Stainless Steel Construction, Plastic Chain with Rubber Grippers adjustable to run container diameters from 1.5 inch to 6 inches, Compact Unit only measuring 15 feet long x 4 feet wide x 5 feet tall, Speeds up to 400 containers/minute, Last rinsing 12oz. Glass Bottles, Last Day of Production December 26, 2019

Catalog Ad Posted 1 month ago in Used Packaging Equipment by United Food & Beverage (2404 views)

Item Type: Tray Shrink Wrapper Manufacturer: Arpac Model: 25TW-28 Serial: 4617 Last Use: Trays of Bottles Dimensions: 12 long x 4 wide x 6 tall Condition: Good   Last used for bottles in trays, 28″ wide 12 inch tall seal bar, Heat Tunnel included, Runs up to 20 packages/minute, 34 inch infeed/discharge elevation, Right Hand Machine, Allen Bradley SLC 5/03 PLC with Allen Bradley 160 VFD Drive, 460 Volts, 3 Phase, 60 HZ, Steel-It Gray Paint, Low Film Alert, Central Point Lubrication, 80 PSI Air Minimum, Turbo Cooling, Intralox Conveyor Chain in Heat Tunnel, Good Condition

Catalog Ad Posted 1 month ago in Used Packaging Equipment by United Food & Beverage (20250 views)

Item Type: Can Filler Manufacturer: Crown – Angelus Model: Uniblend 72 – 120L Last Use: Soft Drink Dimensions: 20x8x8 Condition: Fair Last ran soft drinks on 12oz. cans up to 1100 cans per minute, Setup for 202 lids, Missing In-motion timer, Includes Lube Panel and Control Panel with Allen Bradley MicroLogix 1100 PLC, Tipless Valves on Filler, Mounted on Common Frame

Catalog Ad Posted 1 month ago in Used Packaging Equipment by United Food & Beverage (6402 views)

Item Type: Tray Packer Manufacturer: SMI Model: LSK 30T Year: 2003 Last Use: Juice Bottles in Tray Dimensions: 30 feet long x 7 feet wide x 8 feet tall   Machine will make the tray, pack the tray and wrap the tray with film, Also runs Pads with Film, last ran 12 and 24 packs of small juice bottles in tray or (4) 6 Packs in a tray, Good Condition – last running October 2016, Flexible Machine to run Multiple configurations, Nordson Glue System, Speeds up to 30 Cycles per Minute, Compact Unit – Takes up Little Floorspace, Very Good Condition, 460 Volts, Runs clear or print registered film

Catalog Ad Posted 1 month ago in Used Packaging Equipment by United Food & Beverage (19519 views)

Item Type: Case Erector Manufacturer: Pearson Model: R208 Year: 2004 Last Use: Beverage Dimensions: 20 x 6 x 8 Condition: Good Unit was purchased new in 2004, Allen Bradley SLC 5/04, Infeed Blank Hopper, Nordson ProBlue Glue Unit, Speeds up to 30 Cases/Minute, Makes cases from 10 inches to 23 inches in length, 5.00 inches to 16.00 inches in width, 5.50 inches to 22.50 inches in depth, adjustable machine, 460 Voltage, 60HZ, 3PH, In Production up to April 2019

Catalog Ad Posted 1 month ago in Used Packaging Equipment by United Food & Beverage (14698 views)

Item Type: Handle Applicator Manufacturer: PakTech Model: CCA 600 Serial: CCA 600 03-03 Year: 2014 Last Use: 12oz. and 16oz. and 20oz. cans Dimensions: 16 x 5 x 8 Condition: Excellent   Dual Lane Infeed Setup for 12oz, 16oz and 20oz. cans Capable of processing up to 600 cans/minute Operator required for manual loading of handles Tool-less changeover between handle types Stainless Steel Construction Safety Lock Features on Doors Allen Bradley CompactLogix L36ERM (5) Allen Bradley 525 VFD Drives Allen Bradley 1500P Operator Touchscreen 240 Volts, 3 Phase, 60 Hertz

Catalog Ad Posted 1 month ago in Used Packaging Equipment by United Food & Beverage (4855 views)

Catalog Ad Posted 1 month ago in Used Packaging Equipment by United Food & Beverage (12926 views)

Item Type: Bottle Rinser Manufacturer: McBrady Model: 100 Serial: WS54-11122 Year: 2000 Last Use: Food Packaging Dimensions: Approx. 4 feet long x 3 feet wide x 6 feet tall   Condition is Good, Currently Setup for 16oz. and 24oz. Glass Jars, Flexible Changeover, Control Panel with Allen Bradley 1305 Frequency Drive, (2) Extra Wheels Available – (1) being setup for 28oz. glass, Max speed around 100 BPM, Last used with water rinse

Catalog Ad Posted 1 month ago in Used Packaging Equipment by United Food & Beverage (6930 views)

Item Type: Gripper Rinser Manufacturer: Bevco Model: 610 Last Use: 12oz. Glass Bottles Dimensions: Approx. 15 feet long x 4 feet wide x 5 feet tall   Setup for Water Rinse, Stainless Steel Construction, Plastic Chain with Rubber Grippers adjustable to run container diameters from 1.5 inch to 6 inches, Compact Unit only measuring 15 feet long x 4 feet wide x 5 feet tall, Speeds up to 400 containers/minute, Last rinsing 12oz. Glass Bottles, Last Day of Production December 26, 2019

Catalog Ad Posted 1 month ago in Used Packaging Equipment by United Food & Beverage (13590 views)

For Sale - 200 Gallon Stainless Steel Mixing Tank Includes Stainless Steel piping and Centrifugal Pump On Casters/Portable Tank Open Mounted Lid, CIP Spray, Multiple Inlet Pipings, 4 inch outlet.

Catalog Ad Posted 1 month ago in Used Packaging Equipment by United Food & Beverage (4821 views)

Item Type: Can Filler Manufacturer: KHS – Angelus Model: CF120 (Filler), 121-L (Seamer) Last Use: Soft Drink Dimensions: 20x8x8 Condition: Good   Last ran soft drinks on 12oz. cans up to 1500 cans per minute, In operation till May 2019, Filler and Seamer have been well maintained, Setup for 202, Chucks and rolls in good shape, Filler and Seamer are mounted on common Base, Includes Lube Panel and Control Panel with Allen Bradley SLC 5/05 PLC and PowerFlex 70 VFD Drive, Operator Touchscreen Allen Bradley Panelview Plus 1000, Tipless Valves on Filler, Guarding around machines, Bottom Gearing in Great Condition, Operator Platform Included

Catalog Ad Posted 1 month ago in Used Packaging Equipment by United Food & Beverage (25639 views)

Item Type: Case Erector Manufacturer: Pearson Model: CE-25T Year: 2009 Last Use: Distribution Plant Dimensions: 10x5x6 Condition: Good Unit was purchased in 2009, Utilizes Tape to Seal Boxes, Speeds 15-20 cases per minute (depending on case size), Allen Bradley CompactLogix L31 PLC, Stack Vertical Blank Magazine, Makes cases from 8.75 inches to 23.50 inches in length, 5.00 inches to 16.00 inches in width, 5.00 inches to 21.00 inches in depth, adjustable machine, 230/460 Voltage, 60HZ, 3PH, Six Machines Available to Choose From

Catalog Ad Posted 1 month ago in Used Packaging Equipment by United Food & Beverage (17065 views)

Item Type: Carrier Erector Manufacturer: Pearson Model: BE60 Serial: 201310011343RF Year: 2013 Last Use: Cidery Dimensions: 10 x 2 x 6 Condition: Like New Purchased new in 2013 – last running at Cidery plant, Very Good Condition, Can erect four, six, and eight pack carriers at speeds of up to 60 carriers per minute, Allen Bradley Controls

Catalog Ad Posted 1 month ago in Used Packaging Equipment by United Food & Beverage (11156 views)

Item Type: Accumulation Table Manufacturer: Unknown Last Use: Soft Drink PET Dimensions: 4 x 6 x 4 tall   Last used in Soft Drink Plant for different sized PET Bottles, Stainless Steel Construction with Plastic Belting, Motor included

Classified Ad Posted 2 weeks ago in Used Packaging Equipment by David Gilmour (15102 views)

Used Side Grip Bottle Elevator for glass beverage bottles, used in a beverage packaging plant. Has seen little use. Infeed height: 56 inches Outfeed height: 132 inches 11 feet Adjustable conveyor width ranges: 3.5 to 11.5 inches Frame dimensions: 53 length x 38 width (inches) Power supply: 240-480 voltage / 3 phase / 60 hertz 7.5 amperage Overall dimensions: 112 length x 38 width x 132 height (inches)

Classified Ad Posted 3 weeks ago in Used Packaging Equipment by Emily Baadsvik (2259 views)

We have a SMB Technik Rotary Bottle filler, arrowhead bulk bottle de-palletizing feed table, a AES inline helical twist bottle rinser, a alfa-laval 2 hp centrifugal CIP pump, generic manufacturing inline pressure sensitive labeler, LOVESHAW model ld 198 top & bottom case taper, arrowhead bottle case pack off table, lot, interconnecting table top bottle conveyers. We have also added about 15,000$ worth of electrical/mechanical labour to get this thing up and running! Lastly we have a sea-can of custom bottles/lids that we are willing to add as part of the purchase if desired. The bottling line comes with a crown capper, but we could source the same ROPP capper that we have for or you could buy a automatic one if you desire. They are our custom bottle with the maple leaf on the bottom, 380ml, amber coloured. Having a hard time loading a video, so if you are interested...