Cask ACS v4.2 canning line. 35-40 CPM, plus auto and manual depalletizers, twist rinses and change parts for 12oz and 16oz, date coder ( $68,500 )New Featured
Cask ACH Canning Line for sale in Portland Oregon. Thoroughly tested and approved. Many upgrades like HMI touchscreen interface, new parts throughout (we were hunting for an issue with the seamer and replacing every part we touched, turned out to be something stupid!), brand new product lines, a 25′ 4-wire 40amp power cord, and much more. Sale includes an auto depalletizer and an infeed shaker table (or manual depal), both by Cask. 12oz and 16oz twist rinse cages, changeover parts for both sizes. Mathews i-Mark C84 continuous inkjet printer, attaches to twist rinse and hits the bottom of the can with a date code on its way through (up to 4 lines of text), retail $8000. Including several thousand dollars worth of spare parts and several original manuals in 3-ring-binders. We welcome in-person inspections. Unit is ready to pickup or ship, we can handle freight or facilitate your arrangements. Can...
Two benchtop Cannular beer can seamers, counter pressure can/bottle filler & MYSTERY MACHINE ( $1,400 )New
We are a copacker and have been canning with benchtop equipment, have recently upgraded to an automated line. We were able to fill, seam, and pack about 350-400 cans per hour with 4 people. Lot includes two Cannular benchtop can seamers, one is a few months old and the other came to us used in great shape. Chucks for both 12 and 16 oz cans included, as well as spanner wrench and replacement bearings. Oem springs broke a couple of times and were all upgraded to stainless, have been fine since. The white filler works for cans and bottles. CO2 purge, seals around a bottle neck and can act as a counterpressure system. We only used with cans as we have a bottling line, worked great as a CO2 pushed gravity fill into cans. The stainless filler is a mystery machine - might be the most valuable part of this...
We purchased this GAI 1305 Monoblock from the original owner last year, but due to COVID, never ended up commissioning it. We have the fittings for different bottle sizes as well. We have video of it working. Everything as far as we know is working, happy to send additional photos upon request. Manufactured in 2012. See youtube link for actual unit video. Here's the Prospero link for more details: https://www.prosperointernational.it/en/prodotti/gai/monoblocks-series-1005w-1305w-1605w-2005w-2505p-3005p/ Photos are from actual unit in current condition. Ideally would be picked up from our location here in Anaheim, CA (zip 92801). Contact Tony at email@example.com
http://American Canning Machine single head filler with indeed table and auto can seamer, we ran 800 cans on this machine, runs like a champ, selling because Covid hurt our business
MUMM 6 Pack, 4 Pack Ringer. Brewery has closed but equipment was being used as of last year at a contract brewing facility. In great working condition. Out of Pak Tech or tired of slapping on those things manually? Costs savings on packaging is around 20 cents a six pack over pak tech not counting labor. Has a feeder short conveyor with it. Email me if interested.
We are upgrading to a faster automated canning system and will be selling our Cask MCS canning machine, which will be decommissioned at the end of January. The canner has been very reliable in the year that we have owned it and is a perfect entry-level canning system. This older MCS model uses a smaller motor with a 115V which is a nice feature if you have a limited power supply. After purchasing the canner last January, we replaced all bearings, the chuck, one die, and some misc. small parts. In the last 6 months, we have been canning between 6,000 and 8,000 12 oz cans each week with 2-3 staff working in an assembly line setup. The machine is mounted on a 6ft stainless steel table with locking caster wheels and includes a digital date coder set up to code the bottom of the cans before being rinsed and...
For sale is a used shrink bundler. This unit was used for 6, 12, and 24 pack trays. The incoming rails are adjustable based on your tray height. We have run 8.4oz-16oz cans on this line without issue and the height should accommodate up to 19.2. Operation is very simple. The operator loads cans into trays, and then places the trays on the incoming conveyor. A heat knife comes down to cut the film and attach it together. The tray then moves into the heat tunnel, where it shrinks over the tray. Branded films can be used to improve finished case appearance and secure the product. Older machine, but we found that parts (if needed) were readily available. It is a conveyor and heating elements, so not a lot to go wrong here - a real workhorse. We are moving to cartons so we are selling this. Only about 10K...
this is a great continous flow injet coder, comes with stand, extra ink and cleaning fluid, an extra sensor and manual. Can palletise and load. buyer resposible for shipping but can assist we getting a quote. $3750 or near offer.
Auction catalog seen here - https://www.bidspotter.com/en-us/auction-catalogues/timed/ufood/catalogue-id-united10012
Complete packaging line available for purchase. Price inclusive of all listed pieces of equipment & spare parts inventory. Fully functioning, in great working condition. 1 x M6 Meheen 6 Head Filler (341ml) 1 x Inline Webmaster 1000 Pressure Sensitive Labeller 1 x RSC Inline 8 Bottle rinser 2 x Accumulation Table 1 x Rotary Table Video available upon request. No reasonable offer refused.
Meheen 6 Head filler for sale. Manufactured in 2013. Very well maintained. We are just moving more to cans and don't have a need for this machine anymore. We were able to get TPOs well under 50ppb with every run and the "pulse" function this machine has. Upgraded with the larger cap hopper. Just put brand new fill tubes on. Fills 12 oz bottles and I can get you the spec sheet if you need it. Pneumatic 6 pack erector! Tired of popping those bottle 6pks open by hand? Well, it's your lucky day! Just feed a stack into the hopper and hit start. The machine will index one forward and open it with the power of suction. Then it will pop the tab in place and when it indexes the next one, it will push the finished one out for you to stuff into a case. Save time! Save energy!...
https://pearsonpkg.com/equipment/erect/case-erector/ce25/ Great condition case erector for sale. Fully operational and well maintained. We also have listed a carrier erector, multipacker and necessary conveyance to combine for a complete solution. Conveyance at additional cost depending on what is required or if purchasing all units together.
Great condition carrier erector for sale. Fully operational and well maintained. We also have listed a case erector, multipacker and necessary conveyance to combine for a complete solution. Conveyance at additional cost depending on what is required or if purchasing all units together.
Used Domino A220 Ink Jet Printer/Dater/Coder Operational until late 2019. Bought for $8000 in 2012. Unit has power (see pictures) but will require some servicing from manufacturer to get back up and running to full capability. Looking for $500, buyer pays shipping. Call or email with questions or for more pictures.
Up for sale is a Combi EZB case erector. This machine was acquired in a brewery acquisition and the previous owner was using it for 12 oz bottles. Feel free to ask any questions. Cheers, Winslow