Classified Ad Posted 2 days ago in Used Packaging Equipment by Jean-Pierre Parent (1133 views)
Cask ACH Canning Line for sale in Portland Oregon. Thoroughly tested and approved. Many upgrades like HMI touchscreen interface, new parts throughout (we were hunting for an issue with the seamer and replacing every part we touched, turned out to be something stupid!), brand new product lines, a 25′ 4-wire 40amp power cord, and much more. Sale includes an auto depalletizer and an infeed shaker table (or manual depal), both by Cask. 12oz and 16oz twist rinse cages, changeover parts for both sizes. Mathews i-Mark C84 continuous inkjet printer, attaches to twist rinse and hits the bottom of the can with a date code on its way through (up to 4 lines of text), retail $8000. Including several thousand dollars worth of spare parts and several original manuals in 3-ring-binders. We welcome in-person inspections. Unit is ready to pickup or ship, we can handle freight or facilitate your arrangements. Can...
Classified Ad Posted 1 week ago in Used Packaging Equipment by T G (4298 views)
For Sale is a Turnkey Canning Plant that can run up to 100 CPM (12 oz), and includes the below equipment: Palmer Canning Systems Craftbulk Depalletizer Twist-Rinse with Air Ionizer Palmer Canning Systems 12/4 Craftblock Rotary Head Filler/Seamer CTM Series 360a 7” Pressure Sensitive Inline Labeler w/Conveyance Palmer Canning Systems Accumulation Table Paktech CCA-120 Applicator All Conveyance Between Units Supplied by Palmer Canning Systems Change Parts for 16 oz. and 19.2 oz Cans, and Spare Parts Inventory Available to ship starting late February 2021 as we install a larger canning plant. We are asking $350k plus crating, with buyer responsible for shipping. Email for more information on the individual units for sale.
Classified Ad Posted 2 weeks ago in Used Packaging Equipment by Collin Field (9682 views)
100CPM 12oz Standard/Sleek 80CPM 16oz Standard Buffer tank with product modulating valve Pre fill purge nozzles, gassing tunnel, underlid gassing all independently regulated Ran about 7 million cans, taken out of service and thoroughly cleaned internally/externally on 10/8/2020 in working condition Change parts sold separately Upsizing to larger filler Independent audit conducted September, 2020 and available upon request Sleek change parts available for additional cost Crated and ready to ship
Catalog Ad Posted 4 months ago in Used Packaging Equipment by Front Range Fabrication (6850 views)
Currently accepting offers for complete line. Detailed specs available by email. Components listed below. Would be willing to sell individual units or trade for higher capacity can line. We can package, transport, and install. Please request quote if needed. PALMER COMPACT MONOBLOCK 45 CPM 12 HEAD ROTARY FILLER: SKA DEPALITIZER: Can-i-Bus Depalletizer - S/N 0420-328 MARKEM-IMAJE 9410 Inkjet
Classified Ad Posted 1 week ago in Used Packaging Equipment by whalers (6865 views)
Upgrading to a Krones rotary this Winter which means it's time to bid farewell to our trusty Cask ACS X2. We came from a Cask ACS 5 head filler, were debating a rotary at the time, but ended up going this route and it's been a monster in terms of machine cost vs case output. Typical day is a 1,000 cases and it's no sweat. This was rebuilt in 2019 with all new parts from the factory, is in excellent condition, is currently in operation, and will be pulled from service mid-February. Included in the sale is the filler / seamer, 12 oz twist rinse, and a full assortment of spare parts.
Classified Ad Posted 3 weeks ago in Used Packaging Equipment by Matt Simonds (2149 views)
For sale is 5-head Wild Goose canning line (WG5). This line was purchased new and installed in spring of 2019. We are upgrading to a larger line - this one is available immediately. We were able to consistently achieve speeds of 40 cpm and could reach as fast as 50 cpm. Includes inlet pressure and temperature monitoring, standoffs for 375 mL, rinse & air tunnel, and manual sweep whale tail. Price $100,000 FOB 87104. Pickup would be cheapest, but we can crate/palletize if necessary.
Classified Ad Posted 5 days ago in Used Packaging Equipment by Josh Gilbert (4547 views)
We are selling our Palmer CraftBloc 12/1 (12-heads, 1 seamer) that we installed new in 2014. We've packaged two GABF-winners among the thousands of 202 dia 12 oz cans we’ve filled over the year. For printed cans, we have 3 people on the line (operator, handle-applicator & case stacker). For shrink-wraps, we have someone sitting on a ladder on the de-pal conveyor making sure cans don’t stick. The seamer hub has been replaced recently, as have the seals on the fillers. Current layout and photo attached. Other useful specs: Palmer Canning Fully Automatic, Isobaric Micro-Canning Line for Craft Beer Monobloc - 42 CPM — Turn-Key System Fully automatic Ska Fabricating de-palletizer (3’-9” x 6’-0” x 11’-5”) 9’-6” long In-Line Empty Can Rinse Tank with Gravity Drop Fitting 36” In-feed Conveyor Mono-Bloc 12/1 Head Rotary - Counter Pressure Filling System with Single Head Mechanical Seaming and pre-fill purge nozzles (4’-5” x 7’-1”)...
Classified Ad Posted 3 days ago in Used Packaging Equipment by Chris lowman (15501 views)
9 filler head bottling line fills a maximum of 2200 bottles per hour Pressure dating Labeler for neck and body labels Pack on table and pack off conveyor belt. Water blow off piping can be taken off or included at no additional fee. Fan for this added equipment is currently not working. Any extra parts we have on site including filler heads, pneumatics, comac tool box of parts are all included. No longer need the line due to switching completely to cans. Buyer responsible to crating and shipping. We have a forklift on site to assist with moving. Also posting a Elliot Case erector that was used in tandem with this bottling line, and the pallets of leftover bottles as well. Links will be added soon.
Classified Ad Posted 2 weeks ago in Used Packaging Equipment by Jeremiah Johnson (4872 views)
***Please email jeremiah@jjbrew.com for photos and vids*** We have outgrown our CASK ACS Canning line and will be installing a higher speed line during the first week of January. This CASK ACS is ready to rock - we have packaged more than 2 million cans of beer each of the last 2 years on this line. It's a workhouse and with solid care will work like a beast. It runs consistently at 35 cans per minute and we run the line 8-10 hours at a time to output 16-18,000 beers per session. This is NOT state of the art but if you are looking to package your beer and are doing less than 7,000 bbl of packaged beer annually than this line will do the job with a crew of 2 people. You need a line guy who watches lids, mans the controls, works with the depal and the filler...
Classified Ad Posted 4 weeks ago in Used Packaging Equipment by Winslow Sawyer (3423 views)
Up for sale for sale is a Twin Monkeys Animas five head canning line with full sized manual depalletizer, twist rinse and Squid Ink Streamline 5 Spray Date Coder. This line was acquired in a brewery acquisition, but we already have a canning line, hence the sale on this barely used line. The line is in good condition and comes with everything you need to start canning 12 or 16 oz cans. The line has low hours on it with only 6000 cases through it (equal to canning once a week for 6 months). The previous owner said they were able to operate the line with two people and runs around 30-50 cans per minute depending on product. This unit is ready to go and doesn't need the rehab and TLC that you see with a lot of units on this site. Skip the manufacturer wait times (12 plus weeks)...
Classified Ad Posted 1 week ago in Used Packaging Equipment by Jean-Pierre Parent (1774 views)
We recently started canning for a copacking client and bought a pair of Cask ACS’s, only need one. We chose the one with the orientation we prefer (they were mirrored) and are selling the other. We’ve been through the electrical and pneumatic system and everything works fine, got to about 30 cans per minute but a few adjustments will speed that up a bunch. System has an upgraded HMI touchscreen interface (nicer than the one we’re keeping, we’re a little jealous!) Brand new product lines (we replaced yours when we did ours) and a 25′ 4-wire 40amp power cord added. We have canned with the other unit for four days and after getting it all set up it worked well. We have not been through this unit as thoroughly of course, but have no reason to believe that it wouldn’t do just as well. Seamer has had bearings replaced and...
Classified Ad Posted 1 week ago in Used Packaging Equipment by Scott_Roth (9305 views)
Originally purchased for $240,000 this line is a must sell to make room for a new packaging line taking its place. Now is a great time to get into glass with the added global constraints on can supply. This comac line has run reliably for 3 years and consistently puts out bottles with sub 40 ppb O2 levels. Item: 2016 COMAC 12/12/1 Rinse Fill Crown (Monoblock) Serial No: Output: 2,700 Bottles Per Hour Configuration: 12 oz. longneck glass bottles. Can be configured to run other sizes with additional change parts. Product Flow: Left to Right Hardware: Siemens® S7 PLC. Electrical: 240V, 3 Phase, 60 H Pack On: 4 wide motorized conveyor Conveyor: 40’ of straight conveyor belt, with motor drives. Labeler: In-Line® Paradigm 700 pressure sensitive labeler. Currently configured for full wrap label. Includes trunion change parts for front and back label application. Date Coder: Anser® U2 date coder. Spare...
Classified Ad Posted 1 day ago in Used Packaging Equipment by L Anthony (765 views)
We purchased this GAI 1305 Monoblock from the original owner last year, but due to COVID, never ended up commissioning it. We have the fittings for different bottle sizes as well. We have video of it working. Everything as far as we know is working, happy to send additional photos upon request. Manufactured in 2012. See youtube link for actual unit video. Here's the Prospero link for more details: https://www.prosperointernational.it/en/prodotti/gai/monoblocks-series-1005w-1305w-1605w-2005w-2505p-3005p/ Photos are from actual unit in current condition. Ideally would be picked up from our location here in Anaheim, CA (zip 92801). Contact Tony at eplbj@aol.com
Classified Ad Posted 3 days ago in Used Packaging Equipment by Deep_River (3712 views)
We are selling our trusty cask ACS 4.2 canning line. it has been in operation with us since 2014. Runs between 30-35 CPM depending on can size. easy to change over from 12oz to 16 oz cans. This machine has been great for us but we just need to upgrade to a faster line to keep up with our current production. we will decommissioning the line the week of January 11th. if you would like to see it run and are interested let me know. we have a wealth of in house knowledge and spare parts that convey with the line. we also have a in-line labeler that we would be looking to sell if interested. bearings, chucks and seaming rolls have been replaced in the last month.
Catalog Ad Posted 2 months ago in Used Packaging Equipment by Sound Brewing Systems (6381 views)
Used, Krones 20 valve filler. We are selling the whole package; this includes Filler / Crowner Rinser Labeler Drop Packer Pack-On Table Supporting Conveyors Will consider selling components separately, let's chat! Was running beer at 100 / per minute - top speed could be 140 depending on product. Ready now to rig out and ship - shipping is buyer's responsibility. Asking price is open for discussion - call or email!
Classified Ad Posted 2 days ago in Used Packaging Equipment by Shawn Gentry (3540 views)
We have a Cask ACS 5 head canner for immediate sale. The seamer is almost all new parts, including the chuck and dies, Cask did the work. Majority of Festo parts, seals, and bearings have been replaced within the past 6 months as well. There is a rinser and air knife attached. Comes with twists for 12oz and 16oz cans. The 12oz one is fitted with a water rinse and compressed air fittings. 30-34 cans/minute. Manuals are included. More pics available.
Classified Ad Posted 2 weeks ago in Used Packaging Equipment by Justin Beardsley (2063 views)
We unfortunately need to sell our canning line that we just got not quite a year ago. It has low cycle time on it, ~36,000 cans. During that time there have been no failures or problems with the machine. I can’t recommend this equipment more, it has been fantastic, Low DO numbers. Our average pickup was 20ppb or less. Servo seamer is very consistent and reliable, no seaming issues. Cans are all filled consistently with good FOB before lidding.
Classified Ad Posted 2 weeks ago in Used Packaging Equipment by Mitch Reed (22749 views)
PAI 6251 Palletizer Company: Production Automation Incorporated, Montgomery, AL Our 6251 was built in 1995. It was taken back into the manufacturer at Montgomery and refurnished (6251R) in 2005. It has a PLC 5/11 and that can be upgraded to a 5/20 if needed (this just adds more memory). Here is what was done during the refurbish in 2005 (6251R): • Modified to handle 48x40 and 36x36 pallets- End Load pallets • Add a finger pushover • Rebuilt the divider • Complete check out of the electrical controls • Repaint the palletizer • Replaced the platform/catwalk • PLC remained an AB 5/11 with a 10" color touch screen • Replaced the turning pan assembly • Replaced/ upgraded the apron assembly with a UHMW Apron • Provided a new one station full pallet outfeed We purchased the machine and installed it at our plant. We replaced and updated the following: o...
Classified Ad Posted 3 weeks ago in Used Packaging Equipment by Tilted Barn Brewery (2000 views)
We (Tilted Barn Brewery) have a Microcanner MC202 canning line for sale that has been an absolute workhorse for us since 2016. At 3’ x 14’ the MC202 has a small footprint that’s perfect for tight packaging spaces. Despite its compact size, with 6 fill heads it still churns out up to 60 cases per hour on 12oz or 16oz cans while maintaining consistently low DO output. Over the last 4 years, we’ve only had to perform regular maintenance on it without any substantial downtime. The Microcanner crew provides excellent tech support with quick solutions if we ever run into an issue, which have been few and far between. We are asking $50,000 plus shipping and it is available for sale immediately. Please reach out if you have any questions. More details and specs can be found on the Microcanner website. Here are a few helpful links: Videos: https://www.microcannerparts.com/mc-2021.html Manual:...
Classified Ad Posted 1 week ago in Used Packaging Equipment by Daniel Holloway (3933 views)
Year and a half old Meheen M6 bottling line. Our business has scaled and we no long use it. Used for a small Kombucha company. This is the latest machine with latest operating software and mechanics. When we purchased Meheen didn't have a spec sheet on it with the latest technology. Currently set up for 12oz wide mouth stubby bottle. Similar Specs can be found here- chrome-extension://oemmndcbldboiebfnladdacbdfmadadm/https://wildgoosefilling.com/wp-content/uploads/2019/09/WGF_BottlingBrochure_2019-Q4_SpecSheet.pdf Latest generation 6 head filler No capper, just fills bottles. Currently set up for a wide mouth 12oz stubby bottle. Asking 40k. We will handle all change parts necessary to fit your bottle. Machine will be shipped from Maheen location after parts are made and ready.