Bottling Equipment

Reset - Viewing: Used Product Ads, Category Bottling Equipment

Used Product Ad posted 3 weeks ago in Bottling Equipment by AgerTank

Now Available - A complete filling line set up for glass bottles with an ROPP aluminum closure.  This line ran non carbonated water for a brief time and would be well suited for distilled spirits, water, or other non carbonated products.  Details follow- Item is a used, ABE/Norland model GlassPak 66 bottling line. The line is rated at up to 70 BPM and includes the following: -Tri-Block 12 clamp rinser / 12 valve filler / 6 head capper. The capping heads are 28mm ROPP. The safety guarding package is glass doors w/safety interlocks. Operation of the machine is clockwise (left to right). One set of change parts for glass bottles is included. Previous use was in bottled water facility. Power requirement is 208-240 volt/3-phase. -48" diameter dump/accumulation (pack-on) disk -Infeed conveyor for the Tri-Block rinser/filler/ROPP Capper. -Discharge conveyor from the Tri-Block -Quick Dry 66 air knife external bottle blower -Videojet...

Used Product Ad posted 7 months ago in Bottling Equipment by Sound Brewing Systems

Kosme mono-bloc counter pressure filler & rinser with C & G pressure sensitive labeler and CIP system.  This complete bottling line was new in 2007. All equipment is in storage in Redding CA; inspections are welcome and the asking price is open for discussion.  Delivery and set up assistance within California is potentially available for additional cost. It was built for bottling wine, but it can accommodate carbonated beverages

Used Product Ad posted 1 week ago in Bottling Equipment by Samuel Scoggin

We are looking to sell our very good condition GAI bottling line that we purchased new in 2018. Comes with conveyor tracks, bottle washer/rinser, bottle loading table, capper, bottle labeler, GAI manual, and pneumatic pump. Requires compressed air, water, and co2.  This line would be an ideal packaging system for beer, wine, cider, or other beverages. Can be used for still and/or carbonated products. Comes with parts to do 500ml euro bottles, 500ml ORBC bottles, and 12oz ORBC bottles. The line can be adjusted to different bottle types with change parts from Prospero. Prospero has a parts and service department, and can assist with install and customer service regarding the machine.  This is a 12 head filler, and we run at about 2000 bottles of beer per hour. It can be adjusted to be faster or slower depending on needs and product; with a max speed of about 6000/hr. Good as new, and includes all necessary parts to start packaging! We also have...

Used Product Ad posted 2 weeks ago in Bottling Equipment by Matt Giffen

The filler and labeler were manufactured in 2017 by the Italian company GAI. Until this month, the filler and labeler was in use at Bench Brewing where it filled beer in 500 ml bottles. The machine has already been dismantled and can be inspected. Technical data 8 rinser positions 8 filling stations 1 capping station 220V-3PH Rotary Labeler - hard to find Change over parts included (star wheel) for generic 500ml and custom Great condition Extremely well maintained The automatic rotary labeler is a great complement to the 881 filler complete with conveyor. This filler/labeler/conveyor has been in use since 2018. Lots of pictures and documents available upon request.

Used Product Ad posted 3 weeks ago in Bottling Equipment by Kevin Mashayekan

Automatic bottling machine by Meheen/Wild Goose Filling. Selling everything needed for a complete bottling line in one package: bottling machine with rinser, continuous thread capper, conveyer belt, rotary accumulation table with collection shelf, 10 hp air compressor and peripherals. Currently set up for custom glass kombucha bottles but can be altered as needed. FOB San Diego, CA

Used Product Ad posted 4 days ago in Bottling Equipment by Bill McFee

PRICE REDUCED This full bottling line has served us well for 7 years but we are moving to cans and it needs a new home. The star of this show is the GAI MLE 661 filler, a monobloc 6 head linear counterpressure filler that does double pre-evacuation for ultra low DO values. It features an inverting rinser, 6 head electropneumatic valve filler, fobber, and a rotating turret crowner. It is a very flexible filler with changeout parts for 330 ml, 12 oz longneck, and 750 ml bottles, with crowning heads for 26 mm and 29 mm crowns. We use all 3 sizes regularly and it works well for all. This machine just had a full maintenance service including regasketing by Prospero, the dealer. It has been well-maintained. Full touch screen control. We routinely run this at 1300 bottles per hour on 12 oz longnecks. Also included are: ENO-T3 Labeling machine...

Used Product Ad posted 1 month ago in Bottling Equipment by Rob Creighton

Cimec 12/12/1, 50 bpm bottle rinser, double pre-evac filler, crowner for sale. New in 2015. Included are changeparts for 330 ml, 473 ml aluminum bottle and 750 ml bottle. Also for sale, a Cimec 3 station front, neck & back labeler. New in 2015. Included is sensor for clear film labels and changeparts for 750 ml bottle Call/email for further details.    

Used Product Ad posted 5 days ago in Bottling Equipment by Josh Breinholt

***** Price Reduced *****   Looking to upgrade your bottling operation? Look no further! We're offering an efficient and reliable SBC 750ml Cork & Cage Bottle Filler, proudly crafted in Italy. Features: Capacity: 900 bottles per hour Includes labeler, corker, and cager Perfect for small to medium-scale production Ensures precise and consistent bottling Whether you're a winemaker, brewer, or artisanal beverage producer, this equipment will streamline your bottling process and elevate your product presentation. Don't miss out on this opportunity to enhance your production line.

Used Product Ad posted 2 weeks ago in Bottling Equipment by Alex Unger

PRICE REDUCED - For sale is a used GAI 3031FM-BIER-001 Monoblock automated bottling machine that was built and purchased new in 2014.   $55,000 OBO Electrical: 220V / 3 phase/ 60Hz 12 head rotary rinser 12 head rotary counter-pressure filler Single station crowner Includes mass flow to single-file infeed conveyor External bottle rinser on outfeed conveyor Set up for 12oz longneck bottles, does not include changeover parts (available from Prospero Equipment, GAI's USA rep) Volumetric throughput: 1,200 L/hr (317 gal/hr or 10.2 bbl/hr) (Manufacturer Spec) Speed: 600-3,000 bottles per hour (Manufacturer Spec), we ran 12oz bottles at 50 bottles/min consistently Schneider Electric PLC and HMI Stainless steel construction Safety guarding in accordance with CE standards

Used Product Ad posted 5 days ago in Bottling Equipment by Adam Shay

Krones XT6 capping heads and spindles, 21 available, $2k each.  See complete list of available equipment at .

Used Product Ad posted 4 weeks ago in Bottling Equipment by Todd Bellomy

A great workhorse of a bottling line that has been very well maintained. Easy to fix, maintain, modify, etc. and would be perfect for your non-carbonated needs. Bottles can be sourced from China, 7oz (207ml), twist-off beer crown without modification. Built for this BOTTLE Most of line is 3 phase / 208 - the labeller is single phase 120 This is a full line: > pack on and off tables > washer >12 head filler (non-carbonated) > 6 head capper (beer crown) > in-line labeller If you are a packaging line pro, I'm sure this line could be modified for other bottle sizes. Serious inquiries only please.

Used Product Ad posted 4 weeks ago in Bottling Equipment by Chris Mitus

Automatic bottle corker manufactured by Liquid Packaging Solutions. Model # CAP-BTC-FA

To top