Bottling Equipment

Reset - Viewing: Used Product Ads, Category Bottling Equipment

Used Product Ad posted 4 weeks ago in Bottling Equipment by AgerTank

Now Available - A complete filling line set up for glass bottles with an ROPP aluminum closure.  This line ran non carbonated water for a brief time and would be well suited for distilled spirits, water, or other non carbonated products.  Details follow- Item is a used, ABE/Norland model GlassPak 66 bottling line. The line is rated at up to 70 BPM and includes the following: -Tri-Block 12 clamp rinser / 12 valve filler / 6 head capper. The capping heads are 28mm ROPP. The safety guarding package is glass doors w/safety interlocks. Operation of the machine is clockwise (left to right). One set of change parts for glass bottles is included. Previous use was in bottled water facility. Power requirement is 208-240 volt/3-phase. -48" diameter dump/accumulation (pack-on) disk -Infeed conveyor for the Tri-Block rinser/filler/ROPP Capper. -Discharge conveyor from the Tri-Block -Quick Dry 66 air knife external bottle blower -Videojet...

Used Product Ad posted 1 day ago in Bottling Equipment by Geoff Craven

We have a used 4 head meheen. This has been in storage for about 10 years now. It was in working condition when it was last used. Buyer responsible for shipping. We can palletize and load on truck.

Used Product Ad posted 2 days ago in Bottling Equipment by Ryan Eaton

I purchased this Bottling line from the original owner in 2022.  It has been disassembled and in storage since purchase.  It was intended for our craft soda business but ended up being too large to fit in our facility.  It was working at the time of purchase.  I'm sure it will need servicing and a little TLC to get it up and running for your brewery but it is a beast of a machine.  The major parts include a depalletizer, accumulation table, paste labeler, all conveyance and motors, Control units, 18 head rinse fill and cap, dryer tunnel, and pack off table.  The only issue that we are currently aware of is a bad hydraulic seal on the paste labeler.  It leaks.  Not sure if it's reparable or needs to be replaced.  Local pickup, or shipping coordinated by buyer.  I can no longer store this item where it has been...

Used Product Ad posted 4 days ago in Bottling Equipment by Geoff Craven

Used case erector. This is designed to manually feed each box in and glue the bottom.  You can run roughly 25 cartons a minute through it. This was used in a brewery primarily for erecting 12oz cartons. It can be changed to accommodate different size cartons. It is in working condition. It could use some maintenance however. Requires 202 power. Buyer responsible for shipping.

Used Product Ad posted 1 week ago in Bottling Equipment by Cullen Dwyer

This rinser is configured to convey bottles from a height of approximately 13 feet, and out-feed in the opposite direction at a height of 4 feet.  It grips bottles gently from the side with rubber chain links, inverts them for rinsing, allows drainage to a catch-pan, and turns them upright again.  In-feed section includes idler cog and frame for 4"-wide conveyor chain, as well as "slowerator" side-belts to ensure proper spacing of bottles.  Vertical section allows opportunity to date-code bottoms of dry bottles.  Easily adjusts for various bottle widths with the turn of a single wheel.  Overall dimensions: 15'L x 34"W x 15'H. This is an older machine that was recently decommissioned, and has operated trouble-free for many years.

Used Product Ad posted 1 week ago in Bottling Equipment by Ted Birch

Lightly used Barida Semi-automatic bottle filler. Fills bottles from.33 to 1.5L. Mini-Line 1 semi-automatic labeller included. Both items used for short time then stored. $22,000 Canadian OBO.  

Used Product Ad posted 1 week ago in Bottling Equipment by Cullen Dwyer

Complete line, currently configured to form mother cartons for 12oz bottle 6-packs.  Included two Pearson 6-pack erectors, Pearson 202 case-former, and multi-packer to stuff the 6-packs into the case.  Also includes driven conveyors: straight chain from 6-pack erectors to multi-packer, 90-degree bend chain from case-former to multi-packer, straight belt from multi-packer (driven accumulation) and 90-degree out-feed belt.  Also includes idle out-feed idle rollers with 90-degree bend.  Case former is missing hot glue pot and heated glue hose. Overall dimensions of current configuration are approximately 42' x 23'.  The line was recently decommissioned.  Priced "to go" as we urgently need to free up this space.

Used Product Ad posted 1 week ago in Bottling Equipment by Josh Flinn

Selling a used Meheen 6 head Merlin bottling machine. Machine does not work, selling for parts. Machine was bought by previous brewer and was never functional in this brewery. we are currently selling the machine off for parts.  

Used Product Ad posted 2 weeks ago in Bottling Equipment by dylan wylde

We are selling our Meheen 6 head filler.  Works great.  Filler, crown capper, rinser.  It fills standard 22oz bombers.  Counter pressure filler.  I am offering this at a steal. $3,000.  We switched to cans 2 years ago and have been storing this Meheen.  I don't want to pay storage on this anymore.  Make an offer.  We need it gone asap.

Used Product Ad posted 3 weeks ago in Bottling Equipment by Frank Schiffner

Selling a 4 head counter pressure filler. Purchased used last year from Pivo Brewing, before switching to cans. No longer need, works great once it is correctly setup and adjustments made. Improvments were made to the crowner to prevent bottles getting stuck.

Used Product Ad posted 3 weeks ago in Bottling Equipment by Matt Giffen

The filler and labeler were manufactured in 2017 by the Italian company GAI. Until this month, the filler and labeler was in use at Bench Brewing where it filled beer in 500 ml bottles. The machine has already been dismantled and can be inspected. Technical data 8 rinser positions 8 filling stations 1 capping station 220V-3PH Rotary Labeler - hard to find Change over parts included (star wheel) for generic 500ml and custom Great condition Extremely well maintained The automatic rotary labeler is a great complement to the 881 filler complete with conveyor. This filler/labeler/conveyor has been in use since 2018. Lots of pictures and documents available upon request.

Used Product Ad posted 4 weeks ago in Bottling Equipment by Jamie Garrison

Purchased in January 2020 from Winemaker's Depot.  Used only a couple times. Like New. Been in dry storage since March 2020. We switched our packaging to cans and no longer need this machine.

To top