Used Product Ad posted 2 weeks ago in Other Cooling and Heating Equipment by Adam Shay
Hermis Pasteurizer, year 2017, S/N 17130. Available in August. Complete list of available equipment can be found at www.carolinaprocessequipment.com.
Used Product Ad posted 3 weeks ago in Other Cooling and Heating Equipment by Michael Killgore
Product description Our Kreuzmayr chamber pasteurizer units are designed to pasteurize products which have already been filled into bottles or cans. The KKP 960 chamber pasteurizer is heated through direct steam injection into the chamber, used to heat the product to the desired pasteurization temperature. Air circulation within the steam chamber is facilitated by a stainless steel air blower. The steam is injected, through a pneumatically activated steam valve, into an air channel for optimized steam mixing. There is a condensate drain on the bottom of the chamber, as condensate can not be recirculated in these systems. The thickness of the insulation is 40-100 mm in the chamber walls.
Used Product Ad posted 1 week ago in Other Cooling and Heating Equipment by Robin Stevens
We have used this pasteurizer for the past 7 years. It has been a great piece of equipment and is perfect for companies producing 20-100k gallons per year. To pasteurize we filled 3 macro bins with cans (works with bottles as well) loaded the 3 bins in to a large SS cage then lowered with a forklift in to a SS insulated tank. Please see specs below. Bath Pasteurizer: Total Cost: $30,000 Tank Dimensions Exterior - 6' x 6' x 5' Internal - 5' x 5' x 4.5' Cage Dimensions 52" x 44" x 5' 66 Macro Bins FV12 dimensions: External: 45" (L) x 48" (W) x 16.5" (H) Internal: 42.5" (L) x 45.25" (W) x 12" (H) Hot Water Source (Not included, Available for $1000) 2 x Rinnai Tankless Hot Water Heaters @ 199,000 BTU per unit Pasteurizer Capabilities Cases of 12oz cans per Macro Bin: 22.8...
Used Product Ad posted 3 weeks ago in Other Cooling and Heating Equipment by Adam Shay
Douglas Heat Tunnel. Tunnel opening 14"H x 36"W. On pallet, 7'8"W x 25'6"L x 7'1"H.
Used Product Ad posted 1 week ago in Other Cooling and Heating Equipment by BibcoBrew
20x20x20 Crown Tonka cooler for sale. This could be reconfigured to give you a larger footprint. Garage door opener included. Purchased brand new in 2017. Can be taken down and ready to ship for additional cost.
Used Product Ad posted 2 weeks ago in Other Cooling and Heating Equipment by Adam Shay
Meyer Case Packer. Complete list of available equipment can be found on www.carolinaprocessequipment.com .
Used Product Ad posted 4 weeks ago in Other Cooling and Heating Equipment by Adam Shay
Uni-Pak Can Warmer, Model 624RH, S/N 87-4254. Complete list of equipment can be found at www.carolinaprocessequipment.com .
Used Product Ad posted 2 days ago in Other Cooling and Heating Equipment by Josph Hallock
We have approximately 33 nine foot sections of GF Cool-Fit piping, 90mm (3") ID with 32mm (1") ID drops. It was the piping for our glycol system which was used for a 30bbl system with six fermenters, two brite tanks, a 30bbl CLT and a 7bbl pilot system with two 7bbl fermenters, a 7bbl brite and 2 15bbl Uni-tanks. There are 19 drops and 15 of them have the 110V electric ball valves. The return lines all have manual shutoff valves. There are eight 90 degree elbows in 90mm and four 90mm shutoff valves. Comes with hangers for every four feet of pipe, extra fittings for the 32mm and 90mm piping including 42 90mm couplings for gluing the sections of pipe together so it can be cut to fit your application. It is mounted on two pallets and ready to ship. This piping cost $27,000.00 when installed in 2014. The...
Used Product Ad posted 3 weeks ago in Other Cooling and Heating Equipment by Adam Shay
AGC Heat Exchanger, Model PRO2-SH, S/N 4169. Dims 24"W x 7'L x 5'3"H. Other equipment alco available.
Used Product Ad posted 2 days ago in Other Cooling and Heating Equipment by Liam Wurtz
Great condition. Some marring of stainless on floor of the interior. Scaling up to 10 barrel HLT and looking to sell this one. $6500 or best offer Features 1.5” Tri-clamp Base port with butterfly valve 1.5” Tri-clamp inflow Side port Lid with 2” and 1.5” tri-clamp ports 2” side port for heating Element ¾” port and housing for temp probe Watlow BHN717N3W-40 Tubular Plug Heater: 2” 3 Element 240v 9kw Other Information Easy hook-up to thermostat, electric No built in recirculation Approx. 12 hour heat up
Used Product Ad posted 3 weeks ago in Other Cooling and Heating Equipment by Adam Shay
Alfa Laval Heat Exchanger. Model MO - MF MCS, 1997, S/N 301-04-75540. All available equipment can be found at www.carolinaprocessequipment.com .
Used Product Ad posted 2 weeks ago in Other Cooling and Heating Equipment by David Holm
Stout Electric HLT Tank only with 2 butterfly valves and HERMS coil. HL290RHC-EL-INS (2569). 7 bbl / 290 Gal Insulated Hot Liquor Tank with thermowell, tangential inlet, raised stainless HERMS coil, sight glass, (4) electric element ports, (1) level sensor port, 1/2-in. NPT water inlet, upper overflow port. Clamps, gaskets, lid with 3“ TC port for CIP and/or venting. HERMS Coil: 3/4” OD x 75‘ long Tank: 41.5” diameter x 72”H