Used Product Ad posted 20 hours ago in Other Cooling and Heating Equipment by chad phillips
2 stage heat-x in great condition. Always well maintained. By-pass loop for better whirlpool.
Used Product Ad posted 1 day ago in Other Cooling and Heating Equipment by Jason Pinkowski
Walk-in cooler with CoolBot and AC unit. This unit comes with a floor and a ramp to easily get in. 230v LG AC unit CoolBot set up is easy to set up and works great. Fits Perfectly into a 10' U-Haul Truck!
Used Product Ad posted 2 days ago in Other Cooling and Heating Equipment by Liam Wurtz
Great condition. Some marring of stainless on floor of the interior. Scaling up to 10 barrel HLT and looking to sell this one. $6500 or best offer Features 1.5” Tri-clamp Base port with butterfly valve 1.5” Tri-clamp inflow Side port Lid with 2” and 1.5” tri-clamp ports 2” side port for heating Element ¾” port and housing for temp probe Watlow BHN717N3W-40 Tubular Plug Heater: 2” 3 Element 240v 9kw Other Information Easy hook-up to thermostat, electric No built in recirculation Approx. 12 hour heat up
Used Product Ad posted 2 days ago in Other Cooling and Heating Equipment by Josph Hallock
We have approximately 33 nine foot sections of GF Cool-Fit piping, 90mm (3") ID with 32mm (1") ID drops. It was the piping for our glycol system which was used for a 30bbl system with six fermenters, two brite tanks, a 30bbl CLT and a 7bbl pilot system with two 7bbl fermenters, a 7bbl brite and 2 15bbl Uni-tanks. There are 19 drops and 15 of them have the 110V electric ball valves. The return lines all have manual shutoff valves. There are eight 90 degree elbows in 90mm and four 90mm shutoff valves. Comes with hangers for every four feet of pipe, extra fittings for the 32mm and 90mm piping including 42 90mm couplings for gluing the sections of pipe together so it can be cut to fit your application. It is mounted on two pallets and ready to ship. This piping cost $27,000.00 when installed in 2014. The...
Used Product Ad posted 2 days ago in Other Cooling and Heating Equipment by Michael Partheymuller
I am selling my Kreyer Glycol Single Fan Unit (msrp $644.99) used for chillin walk in coolers. Included is a FermFlex Defrost Controller(msrp $1499.99) and Defrost Kit (msrp $404.99). The kit was purchased new from MoreBeer in October 2022. The unit is capable of cooling a 1750 sq.ft. room (1/3 ton cooling capacity) using your existing glycol chiller and includes a solenoid and connection cable for easy integration. The fan unit requires a 220v electrical connection. It has been disconnected and is currently in storage. Happy to send pictures or answer any questions. Buy to pay shipping.
Used Product Ad posted 3 days ago in Other Cooling and Heating Equipment by Jason Goldstein
Ordered two Glycol to Air Evaporators for our new cold room but project changed during the 12 week lead time for production and now only need one. Still in crate from manufacturer. MSA34A-0623BCM NEMA 4x Non-Fused Motor Disconnect Built to run on 480v for efficiency. Available immediately, paid $6,000 for each but willing to sell one quickly for $4,500
Used Product Ad posted 3 days ago in Other Cooling and Heating Equipment by Nick Fuentes
Never used 10 BBL Hot Liquor Tank (HLT). We purchased it for use but went with a tankless water instead. Forced air burner, also not used, included. Buyer responsible for shipping.
Used Product Ad posted 1 week ago in Other Cooling and Heating Equipment by Chris French
We bought this burner a while back but ended up not needing it. It's brand new, never used and in perfect condition. Does 230K-700K BTU. Perfect for 7-15bbl direct fire system. Save some money and by this new one for a used price!
Used Product Ad posted 1 week ago in Other Cooling and Heating Equipment by Robin Stevens
We have used this pasteurizer for the past 7 years. It has been a great piece of equipment and is perfect for companies producing 20-100k gallons per year. To pasteurize we filled 3 macro bins with cans (works with bottles as well) loaded the 3 bins in to a large SS cage then lowered with a forklift in to a SS insulated tank. Please see specs below. Bath Pasteurizer: Total Cost: $30,000 Tank Dimensions Exterior - 6' x 6' x 5' Internal - 5' x 5' x 4.5' Cage Dimensions 52" x 44" x 5' 66 Macro Bins FV12 dimensions: External: 45" (L) x 48" (W) x 16.5" (H) Internal: 42.5" (L) x 45.25" (W) x 12" (H) Hot Water Source (Not included, Available for $1000) 2 x Rinnai Tankless Hot Water Heaters @ 199,000 BTU per unit Pasteurizer Capabilities Cases of 12oz cans per Macro Bin: 22.8...
Used Product Ad posted 1 week ago in Other Cooling and Heating Equipment by Cat FLEMING
URGENT SALE! Make an Offer!! Drive in cooler, five pallets long by four tall with kegs on pallets. Door 54” by 96”, exterior 80” by 120” tall by 21’ 10” long. , interior 69” wide by 116” tall by 21’ long.
Used Product Ad posted 2 weeks ago in Other Cooling and Heating Equipment by BibcoBrew
20x20x20 Crown Tonka cooler for sale. This could be reconfigured to give you a larger footprint. Garage door opener included. Purchased brand new in 2017. Can be taken down and ready to ship for additional cost.
Used Product Ad posted 2 weeks ago in Other Cooling and Heating Equipment by David Holm
Stout Electric HLT Tank only with 2 butterfly valves and HERMS coil. HL290RHC-EL-INS (2569). 7 bbl / 290 Gal Insulated Hot Liquor Tank with thermowell, tangential inlet, raised stainless HERMS coil, sight glass, (4) electric element ports, (1) level sensor port, 1/2-in. NPT water inlet, upper overflow port. Clamps, gaskets, lid with 3“ TC port for CIP and/or venting. HERMS Coil: 3/4” OD x 75‘ long Tank: 41.5” diameter x 72”H