Used Product Ad posted 4 weeks ago in Other Cooling and Heating Equipment by Stoney Head
Micro-matic 3/4 HP, 5100 BTU glycol pack, purchased new in 2014, dual pumps, can be used for trunk beer lines (up to 350') or direct tank control, replaced digital controls in 2018, replaced 1 pump in 2019. Requires 230V, single phase power. Coolant gas is R134A, 11.5 Gallon glycol bath. Dimensions are roughly 29'' x 18"x 30" high. Weighs around 170 pounds. If you are reading this ad, it is still available. PRICE REDUCED $2500 You pay shipping and crating from Reno, NV 89511
Used Product Ad posted 1 day ago in Other Cooling and Heating Equipment by Jason Pinkowski
Walk-in cooler with CoolBot and AC unit. This unit comes with a floor and a ramp to easily get in. 230v LG AC unit CoolBot set up is easy to set up and works great. Fits Perfectly into a 10' U-Haul Truck!
Used Product Ad posted 2 days ago in Other Cooling and Heating Equipment by Josph Hallock
We have approximately 33 nine foot sections of GF Cool-Fit piping, 90mm (3") ID with 32mm (1") ID drops. It was the piping for our glycol system which was used for a 30bbl system with six fermenters, two brite tanks, a 30bbl CLT and a 7bbl pilot system with two 7bbl fermenters, a 7bbl brite and 2 15bbl Uni-tanks. There are 19 drops and 15 of them have the 110V electric ball valves. The return lines all have manual shutoff valves. There are eight 90 degree elbows in 90mm and four 90mm shutoff valves. Comes with hangers for every four feet of pipe, extra fittings for the 32mm and 90mm piping including 42 90mm couplings for gluing the sections of pipe together so it can be cut to fit your application. It is mounted on two pallets and ready to ship. This piping cost $27,000.00 when installed in 2014. The...
Used Product Ad posted 3 weeks ago in Other Cooling and Heating Equipment by Adam Shay
Douglas Heat Tunnel. Tunnel opening 14"H x 36"W. On pallet, 7'8"W x 25'6"L x 7'1"H.
Used Product Ad posted 2 weeks ago in Other Cooling and Heating Equipment by M S
Used Immersion Heating Element for keg washer, in working condition, had to upgrade to a 240v for our purposes 480v, 3ph, 5kw $200 obo, buyer responsible for shipping fees See posted pics for more info
Used Product Ad posted 3 weeks ago in Other Cooling and Heating Equipment by Adam Shay
AGC Heat Exchanger, Model PRO2-SH, S/N 4169. Dims 24"W x 7'L x 5'3"H. Other equipment alco available.
Used Product Ad posted 3 days ago in Other Cooling and Heating Equipment by Nick Fuentes
Never used 10 BBL Hot Liquor Tank (HLT). We purchased it for use but went with a tankless water instead. Forced air burner, also not used, included. Buyer responsible for shipping.
Used Product Ad posted 1 week ago in Other Cooling and Heating Equipment by Cat FLEMING
URGENT SALE! Make an Offer!! Drive in cooler, five pallets long by four tall with kegs on pallets. Door 54” by 96”, exterior 80” by 120” tall by 21’ 10” long. , interior 69” wide by 116” tall by 21’ long.
Used Product Ad posted 2 weeks ago in Other Cooling and Heating Equipment by Ryan Evenson
This heat exchanger worked great for us for about 3 years on our 7 bbl brew house until we upgraded to a 15 bbl system. Buyer responsible for shipping from Hallock, Minnesota.
Used Product Ad posted 1 week ago in Other Cooling and Heating Equipment by Chris French
We bought this burner a while back but ended up not needing it. It's brand new, never used and in perfect condition. Does 230K-700K BTU. Perfect for 7-15bbl direct fire system. Save some money and by this new one for a used price!
Used Product Ad posted 2 weeks ago in Other Cooling and Heating Equipment by BibcoBrew
20x20x20 Crown Tonka cooler for sale. This could be reconfigured to give you a larger footprint. Garage door opener included. Purchased brand new in 2017. Can be taken down and ready to ship for additional cost.
Used Product Ad posted 1 week ago in Other Cooling and Heating Equipment by Robin Stevens
We have used this pasteurizer for the past 7 years. It has been a great piece of equipment and is perfect for companies producing 20-100k gallons per year. To pasteurize we filled 3 macro bins with cans (works with bottles as well) loaded the 3 bins in to a large SS cage then lowered with a forklift in to a SS insulated tank. Please see specs below. Bath Pasteurizer: Total Cost: $30,000 Tank Dimensions Exterior - 6' x 6' x 5' Internal - 5' x 5' x 4.5' Cage Dimensions 52" x 44" x 5' 66 Macro Bins FV12 dimensions: External: 45" (L) x 48" (W) x 16.5" (H) Internal: 42.5" (L) x 45.25" (W) x 12" (H) Hot Water Source (Not included, Available for $1000) 2 x Rinnai Tankless Hot Water Heaters @ 199,000 BTU per unit Pasteurizer Capabilities Cases of 12oz cans per Macro Bin: 22.8...