Used Product Ad posted 17 hours ago in Brewhouse or Brewing Systems by Mathew Pickering
3.5 BBL electric brew house with Mashtun, Kettle and 7BBL HLT. Plate heat exchanger built in along with both pumps for transfer and HLT. Brew house has wort aerator installed and all needed stainless pipes custom built. Also comes with control panel. 4 of the temp controllers need to be replaced (about $80 each to replace). Custom built with large head space to brew high gravity beer. Single phase 60hz. Also have one back up heating element included. Buyer responsible for rigging and shipping.
Used Product Ad posted 17 hours ago in Canning Equipment by James Partridge
Hello all, I have some brewery equipment up for sale on the North shore of Long Island. More photos will be posted once this site allows it. In the meantime, photos available upon request. The equipment is as follows: Cask Global Canning Solutions Canner MCS-V2 $14k. 10bbl Unitank no valves or carb stone $4250. Variable speed CPE brand CIP Pumps and carts. 2 available. $1250 each. 3HP ProChillerSystems Glycol chiller $6k. Pallet Jack $250. Please feel free to reach Jamie at Partyatthej@gmail.com in regards to any further questions, information or pictures of equipment. Buyers are responsible for pickup or shipping. Thank you.
Used Product Ad posted 18 hours ago in Brewhouse or Brewing Systems by preston gable
20 BBL Brewery 4 - Vessel 20 BBL Steam Jacketed System with Platform and Control System 4 - 3 HP Pumps 1 - 60 BBL HLT 1 - 60 BBL CLT 1 - Heat Exchanger All the Hard piping and majority of the steam piping. Price is loaded onto semi. Can coordinated shipping if needed.
Used Product Ad posted 18 hours ago in Brewhouse or Brewing Systems by Terrence Heisler
1 each 15-barrel HLT 180,000 BTU natural gas direst fire 1 each 15-barrel kettle 200,000 BTUs natural gas direct fire 1 each 15 barrel mash tun with adjustable speed plus reversable and adjustable height augers 1 each killer heater transfer we have done 15 barrels in less than 21 minutes glycol and fresh water 1 mono block 1 logic unit and stand 220vlts 3 phase 1 each1,000lbs hopper and medal stand 18ft tall 1 each vertical auger 220vlts 2 each stainless-steel transfer pumps lots of tri-clover couplers stainless-steel exhaust pipe from the kettle
Used Product Ad posted 18 hours ago in Brite and Storage Tanks by preston gable
Just removed from non-operational brewery, all are barely used. Price is loaded onto a semi. Can coordinate shipping to your location. Willing to cut a good deal for selling them as a package. 5 - 80 BBL Uni-tanks, Jacketed and insulated $12,000 each (over 20k new) 1 - 80 BBL Brite Tank, Jacketed and insulated $12,000 (over 20k new) https://www.mtka-bec.com/category/8/unitank-fermenters https://www.mtka-bec.com/category/6/bright-serving-tanks
Used Product Ad posted 19 hours ago in Chillers by preston gable
Rooftop unit from a closed brewery. Weighs little over 6000 lbs. Price is loaded on a flatbed. Can coordinate shipping if needed. To large for my current needs. 2 - 15 HP compressors. Was fully functional when taken out of service. https://gdchillers.com/products/gd-30h-2c/ Wanting $24,000, feel free to shoot me a price.
Used Product Ad posted 19 hours ago in Fermenters by Wyatt Barger
We have a 15 BBL conical fermenter for sale by SK, asking $8,500. The unit is used and in good condition. The tank was last used in production as recently as October 2021. The manufacturers website can be found at https://sk-skrlj.com/en, the tanks are European made, the manufacturing company is based in Slovenia. Please contact for any more information you may require; we are open to any discussions or offers regarding the unit. Buyer is expected to pay for and arrange shipping. *NO DRY HOP PORT*
Bottle Decorker ( $9,000 )
Used Product Ad posted 19 hours ago in Wine, Cider, and Mead by Wyatt Barger
We have an industrial decorker. I am unsure on the maker but it was made in Italy. This was last used at our winery to remove corks from bottles. Please contact for any more information you may require, we are open to any discussions or offers about the unit. Buyer is expected to pay the cost of shipping.
Used Product Ad posted 19 hours ago in Grain Storage and Handling Equipment by Wyatt Barger
We are selling a used 992 lb. capacity Newlands grist hopper that was made in Canada (manufactured in 2008), used in good condition. The unit has been used as recently as October 2021. Please contact for any more information you may require, we are open to any discussions and offers about the unit. Buyer is expected to pay for shipping.
Used Product Ad posted 20 hours ago in Canning Equipment by Jason Cook
3 head cask filler, 12-15 CPM, includes can rinser with 2 racks. Easily operated by 2 people for upwards of 180 flats a shift. Currently setup for 12oz cans but is easily convertible to 16oz cans by adjusting spacers. Can run seltzers as high as 2.9 vol co2 without issue. Recently replaced Chuck, lift table, seamer bearings, new filling heads and push arm. Lots of spare/ replacement parts. 220v, 50/60hz, 20A Single phase Operational space of 8 sq. feet. On wheels and easy to move. This reliable machine has been well taken care of and is in excellent condition.
Used Product Ad posted 20 hours ago in Canning Equipment by SlyFoxPete
We are selling our Pack Leader PRO-516 inline labeler. This labeler is capable of speeds up to 200 cans per minute. This PRO-516 is in great condition. It was new when we purchased it and was only used for a short period of time. We later made a modification on our canning line that made this labeler unnecessary. At the time of commissioning, we purchased conveyance for the install. We're listing the labeler, infeed/discharge conveyance, and control cabinet together available as a package for $69k. The labeler alone we are listing for $55k. We can palletize and prep the items to ship at the brewery, but the buyer would be responsible for all shipping costs.
Used Product Ad posted 1 day ago in Fermenters by Ryan Roberts
150 gallon dimple jacketed open top 316SS tank - was originally manufactured for a local peanut processing facility working on a patent, patent fell through and they liquidated so we bought this to use for experimental open-top fermentation. Tank has never been used. Has welded angle iron near the bottom to hold a false bottom if one was made. Upgraded to 10bbl system and no longer plan to use 3bbl Single wall brite - Used since June 2019 originally for carbing in the walk-in. Chicago Brew Supply manufacture. On casters. Since getting glycol and jacketed brites we use it as a chemical reservoir from tank to tank CIP. Comes with all fittings pictured 30bbl jacketed ferm - Tank is loaded and ready for delivery. We purchased back in 2017 at auction and have had it on the side of our building in hopes to grow into it, but we wound...