Pre Refrigeration Inc. MA series glycol chiller. 2” expansion fittings (2” FNPT). 100 gal glycol tank. We downsized our operation and no longer need the extra capacity. Electrical: 208-230v/3PH/60HZ MCA: 73 AMP MOC: 118 AMPs Cooling capacity at 90 F 25 f glycol: 97896 BTU/HR (28.7KW) 30 f glycol: 108763 BTU/HR (31.9KW) 35 f glycol: 120337 BTU/HR (35.3) Sound Pressure lvl= 80dB @ 1m Email me with any questions. Shipping is available at buyers' expense and coordination.
The system was purchased with brewery package and already have a G & D chiller. Portland Kettle Works pulled the equipment and verified in working order. Chiller is not currently installed and ready for shipment. Overall in good condition. Open to offers. New equipment 7 x 7 from G & D are around $25K. • 230 volt 3 phase • 48” x 84”L x 62”H • Compressor HP: 7 x 2 • MFG: 2016 • FOB: Roseburg, OR • Sold AS IS
UBC Group EXTRA 3/4-hp Upright Chiller. 115V - PH.1, 60Hz, 16A Purchased two years ago expecting to implement it as we grew, but never used it. It has been wrapped in plastic while stored the entire time and is in "Like New" condition. Priced to move fast. $1,000 OBO
Selling a Pro Refrigeration ChilStar Series 3 HP Glycol Chiller. Purchased in 2017. This model currently sells for $13,226. Specs below / attached in photos. Pro Chiller Model: PE103D1R420-A-V* Tank Capacity: 20 Gals BTU Range: 20,000-26900/hr Dimensions: 55″L x 38″W x 58″H Weight: 950 lbs
Used glycol chiller. Removed from service in July, brewery closed. Was a workhorse for us, very few issues over the years and very easy parts to find when repairs needed. Built by Edwards Engineering/Chiller Solutions in the good ole USA.
Brewery had to close due to covid. Planned a reopening, cannot finish this year. Selling all our Brand New Equipment from this shipment. 12m2 Heat exchanger. Stainless Steel 304. FAST wort chilling. Use two lines - water supply and Glycol, third line for hot wort. 374 lbs For close local Virginia Breweries free delivery. Elsewhere else very affordable drop ship delivery available. Installation & operation help available. Must be able to help download shipment & place.
G&D Chillers 7x7 model 2 stage chiller Purchased new in 2008 **Both compressors are broken and do not work** Chiller capacity: 100k BTU / hour at 28 degrees F set point 230 volt, 3 phase electric Two 7hp compressors (broken) 1.5hp pump Uses R22 refrigerant 115 gal reservoir We used this chiller in our commercial winery for about twelve years, and it used to run great before the compressors failed. At that point we decided to just go ahead and buy a new unit for the winery. We had about 30 tanks (various sizes) hooked to the chiller, and I talked to an engineer at G&D who told me that its technical cooling capacity is 100k BTU per hour at 28 degrees F set point. This chiller would be great for a small brewery once the compressors are replaced. Buyer responsible for shipping from North Carolina.
We bought this back in 2020 for a cider project. After getting the cider going we decided that we didn’t need it. We never even uncrated the chiller so it has never been hooked up or run at all. It’s a 2 HP 15,000 BTU/hour chiller with a 20 gallon reservoir. The chiller runs on 208v/3ph/60hz power needing a minimum of 20 AMPS and max of 30 AMPS. Included is a new unused ABS temp control panel with 8 controllers setup for 24volt solenoids and new unused 4 200mm industrial style temp probes. Documents and Photos are available upon request.
Multiplex Beermaster glycol chiller. 0.5hp compressor, 120v. single0.33hp circulation pump, but can add a second. In working condition.
Our Micro Chill Series offers compact chillers available in 3 HP, 5 HP and 7 HP to cover the range of needs in smaller process cooling applications. With an oversized stainless steel reservoir and heavy duty process pump with built-in fluid dynamic bypass valve, these compact chillers provide precise cooling with the same quality components as their larger siblings, but in a more compact design with an equally compact price. KEY SPECS (WxLxH): 34” X 61” X 50” Tank Volume: 60 GALLONS Process Pump: 1.5 HP GPM @ 25PSI: 40 GPM Operating Weight: 1450 LBS. Connection Size: 1"
DESCRIPTION Our Micro Chill Series offers compact chillers available in 3 HP, 5 HP and 7 HP to cover the range of needs in smaller process cooling applications. With an oversized stainless steel reservoir and heavy duty process pump with built-in fluid dynamic bypass valve, these compact chillers provide precise cooling with the same quality components as their larger siblings, but in a more compact design with an equally compact price. KEY SPECS (WxLxH): 34” x 61” x 50” Tank Volume: 60 Gallons Process Pump: 1.5 HP GPM @ 25PSI: 40 gpm Operating Weight: 1450 lbs. Connection Size: 1"
DESCRIPTION The innovative Multi Stage large chiller package provides all of the efficiency that comes with chillers outfitted with multiple compressors. Capacities ranging from 10 HP to 27 HP are sure to meet even the most chilling of demands. Every circuit is wired separately, giving each compressor equal run time over the life of the large chiller. These are designed to run on an as needed basis, which is ideal for applications with varying load requirements. The redundancy of multi-stage refrigeration circuits ensures that your process and production will never stop. KEY SPECS (WxLxH): 48” x 89” x 66” Tank Volume: 115 Gallons Process Pump: 1.5 HP GPM @ 25PSI: 40 gpm Operating Weight: 2350 lbs. Connection Size: 1.5"
VERTICAL AIR SERIES The Vertical Air series are complete turnkey packaged chillers ideal for high volume operations. To maximize capacity and efficiency, each chiller contains efficient semi-hermetic compressors that are partnered with an oversized vertical discharge condenser. LEARN MORE ABOUT THE GD VERTICAL AIR SERIES We’re here to help 24/7. We’ll respond back to you by email or phone to get your questions answered as quickly as possible. Be sure to give us a call anytime at 800.555.0973or visit us online GDChillers.com CONTACT US INFO@GDCHILLERS.COM 800.555.0973