Latest Brewing Equipment Classified Ads

Used Product Ad posted 1 week ago in Fermenters by chris higgins

We have upgraded our brew system to 15 bbl so we have (3) 5 BBL jacketed unitanks for sale. We purchased them in 2018, they are in excellent condition. What you see in the photos is what you get as far as valves, clamps etc. All three are plumbed for 1 zone glycol with stainless barbs for in and out. $3000.00 each. Shipping cost and arrangement is buyers responsibility, I can load. We will also have a 7 BBL premier unitank and 5 bbl electric brew system HLT/MT/BK available for sale in the next month or so.

Used Product Ad posted 3 weeks ago in Fermenters by Jason Bell

20 BBL DYM Fermenters - Jacketing compromised to outside. Vessel holds liquid and pressure. Great for warm fermentations or as a holding tank. 2 available @ $3,000 each.

Used Product Ad posted 2 weeks ago in Other Packaging Materials by Ethan Hall

IN-LINE rotary collection table. We bought this table with thoughts of incorporating it into our canning line but didn't have the space for it, so it has set on top of our cold room for a year now and it is time for it to go. Buyer pays shipping, we will strap and wrap it on a pallet free of charge. $3000 OBO

Used Product Ad posted 3 weeks ago in Grain Storage and Handling Equipment by Matt Marple

20lb per minute milling.  Explosion proof Moter on rolling cabinet.  Rollers are barely used and replaced right before it was decommissioned.  50lb steel hopper, has a small channel cut into it where we installed a grain shoot.   $3,000 Buyer is responsible for all packaging and shipping costs from Eagle, CO

Used Product Ad posted 3 weeks ago in Grain Storage and Handling Equipment by michael daly

Used Jimboney Malt Mill. Recently upgraded to a larger mill and auger. Used with a 7bbl brew system. Would work great with that size brew house or lower. Also would be great for homebrew shops. Belt was replaced about a year ago. Easy to adjust tightness and change how fine the grind is. An auger can be hooked up to it, but in the past we were milling into bins and dumping them into our mash tun. Plugs into a standard outlet.

Used Product Ad posted 2 weeks ago in Brite and Storage Tanks by Lane Frazier

We had purchased this tank used, and there is a slight pin hole inside the vessel. The glycol jacket is unserviceable, but the tank itself would work well for a holding tank. Unknown manufacturer, but everything else is in working order. Buyer assumes freight charges.

Used Product Ad posted 6 days ago in Chillers by Mike Meyers

Pro refrigeration Chill Star series. Only been in operation half its life. 3hp , 3 phase, rest of info is in the pictures!

Used Product Ad posted 2 weeks ago in Keg Washers by Ryan Pearson

4 head manual keg washer built by Practical Fusion. $3000 (does not include shipping). We had the manifold modified from the original design to add seperate pumps for each chemical reservoir. The pump for the sanitizer reservoir was not working when the keg washer was taken out of service. The heating element for the caustic reservoir worked when taken out of service, but had been taking longer than usual to reach temp. It would probably need replacement eventually. Pumps are 110v and heating element is 220v. Dimensions are approximately 80"x38"x44"(LxWxH).

Used Product Ad posted 4 weeks ago in Canning Equipment by Chris Mottram

-- Single Head filler. -- Refurbished 16oz Dixie Seamer. Cleaned, dried, and oiled after every use. -- Both the Dixie seamer and canner pucks are designed for Ardagh cans, if you want to change to a different type of can you will need to get a new seamer and puck fabricated. -- Diaphragm pump to can rinse. -- Fan and filter unit for top (we never used). -- Added a c02 under can purge (manual). -- Needs two CO2 connections and one compressed air. -- Single phase, requires 20 amp electrical. We were able to do 2-3 cases per hour with consistent fill levels and beer quality held up in cans as long as 6 months. We've used it for two years with no issues. Good for a brewpub or small brewery looking to offer cans to-go. Willing to do a video call to help train.

Used Product Ad posted 4 days ago in Brite and Storage Tanks by John K

7BBL Stout brite/serving tanks, single walled non-jacketed, with fittings. We have 5 for sale, $3000 each or $14,000 for all 5. Purchased used last year but never put in service by us. Palletized and ready to ship. Freight and shipping arrangements buyer responsibility. We can assist loading by forklift for in-person pickup at our location.

Used Product Ad posted 2 weeks ago in Other Kitchen and Food Service by Derek C

Solid 8" stainless, insulated draft setup. Has 16 taps,  shelf,  rinsing tray etc. Save yourself thousands.