New Product Ad posted 11 months ago in Other Cooling and Heating Equipment by Wattco
Screw Plug heaters from WATTCO™ consist of hairpin tubular elements that are brazed or welded into a machined pipe thread fitting, (normally an NPT fitting for North American standards) which are then screwed directly through a threaded coupling in the tank wall or vessel, or installed in pipe. Screw plug heaters are an easy way to heat up solutions in smaller containers that also require controls. Mechanical thermostats or Digital control panels can be used with these immersion heaters to help reach target temperatures with great accuracy meeting your project objectives. Additional thermowells can be installed for high limit temperature probes to help protect your liquid and processes.
Wattco Screw Plug Immersion Heaters
New Product Ad posted 11 months ago in Other Cooling and Heating Equipment by Wattco
Screw Plug Immersion Heaters Screw plug heaters – sometimes referred to as threaded immersion heaters – are constructed of long heating elements in the shape of tubes which are welded into the interior of the heater. The assembly is screwed, plugged, or threaded directly into the system through an opening lined with threadbare – hence the names screw plug heater and threaded immersion heater. This design makes it easy to remove the heater for maintenance or replacement. Screw plug heaters are easy to install and are suitable for a wide range of industrial food manufacturing applications. These heaters are energy efficient and often used for direct heating of chemicals and fluids.
Used Product Ad posted 12 hours ago in Other Cooling and Heating Equipment by Josh Schaffner
This unit was originally acquired to steam sterilize a previous canning line to package mixed fermentation productions without risk of contamination to other products. It performed perfectly for its application and always resulted in ATP readings of 0's. As we're no longer using that canning line or packaging those beverages, it's best that we find a new home for the unit. We have the original operating manual and a few accessories including the the steam rated hose and power cord/plug installed. You'll need additional accessories if you intend to use to clean wooden barrels or floor drains.
Used Product Ad posted 1 day ago in Other Cooling and Heating Equipment by Shane Noble
2 stage heat exchanger with 1.5” TC connections. 8m^2 exchange area. Gaskets in great condition. Removed the glycol stage and some plates as they were not needed. Can reinstall before sale.
Used Product Ad posted 2 days ago in Other Cooling and Heating Equipment by Steve Ruby
For sale is a used Thermaline T13CH Heat Exchanger. Manufactured in 2001, it was designed to be used in conjunction with a 20bbl brewing system. It has been unused for some time, but can be completely deconstructed for cleaning or parts replacement. Some TC ports were damaged/scraped in the move, but can be replaced. Purchased as part of a lot and never had a use for it. New is approximately $4800, asking $1500 OBO. Located in Indianapolis, IN. Will require a liftgate to ship. We will get it on a pallet and wrap it, but buyer coordinates and pays for all shipping and other packaging costs.
Uni-Pak Can Warmer ( $10,000 )
Used Product Ad posted 2 days ago in Other Cooling and Heating Equipment by Adam Shay
Uni-Pak Can Warmer, Model 624RH, S/N 87-4254. Complete list of equipment can be found at www.carolinaprocessequipment.com .
Used Product Ad posted 2 days ago in Other Cooling and Heating Equipment by Adam Shay
Alfa Laval Heat Exchanger. Model MO - MF MCS, 1997, S/N 301-04-75540. All available equipment can be found at www.carolinaprocessequipment.com .
AGC Heat Exchanger ( $7,000 )
Used Product Ad posted 2 days ago in Other Cooling and Heating Equipment by Adam Shay
AGC Heat Exchanger, Model PRO2-SH, S/N 4169. Dims 24"W x 7'L x 5'3"H. Other equipment alco available.
Douglas Heat Tunnel ( $25,000 )
Used Product Ad posted 2 days ago in Other Cooling and Heating Equipment by Adam Shay
Douglas Heat Tunnel. Tunnel opening 14"H x 36"W. On pallet, 7'8"W x 25'6"L x 7'1"H.
Used Product Ad posted 7 days ago in Other Cooling and Heating Equipment by chad phillips
2 stage heat-x in great condition. Always well maintained. By-pass loop for better whirlpool.
Used Product Ad posted 7 days ago in Other Cooling and Heating Equipment by Jason Pinkowski
Walk-in cooler with CoolBot and AC unit. This unit comes with a floor and a ramp to easily get in. 230v LG AC unit CoolBot set up is easy to set up and works great. Fits Perfectly into a 10' U-Haul Truck!
Used Product Ad posted 1 week ago in Other Cooling and Heating Equipment by Liam Wurtz
Great condition. Some marring of stainless on floor of the interior. Scaling up to 10 barrel HLT and looking to sell this one. $5500 or best offer Features 1.5” Tri-clamp Base port with butterfly valve 1.5” Tri-clamp inflow Side port Lid with 2” and 1.5” tri-clamp ports 2” side port for heating Element ¾” port and housing for temp probe Watlow BHN717N3W-40 Tubular Plug Heater: 2” 3 Element 240v 9kw Other Information Easy hook-up to thermostat, electric No built in recirculation Approx. 12 hour heat up