New Product Ad posted 1 year ago in Other Cooling and Heating Equipment by Wattco
Screw Plug heaters from WATTCO™ consist of hairpin tubular elements that are brazed or welded into a machined pipe thread fitting, (normally an NPT fitting for North American standards) which are then screwed directly through a threaded coupling in the tank wall or vessel, or installed in pipe. Screw plug heaters are an easy way to heat up solutions in smaller containers that also require controls. Mechanical thermostats or Digital control panels can be used with these immersion heaters to help reach target temperatures with great accuracy meeting your project objectives. Additional thermowells can be installed for high limit temperature probes to help protect your liquid and processes.
Wattco Screw Plug Immersion Heaters
New Product Ad posted 1 year ago in Other Cooling and Heating Equipment by Wattco
Screw Plug Immersion Heaters Screw plug heaters – sometimes referred to as threaded immersion heaters – are constructed of long heating elements in the shape of tubes which are welded into the interior of the heater. The assembly is screwed, plugged, or threaded directly into the system through an opening lined with threadbare – hence the names screw plug heater and threaded immersion heater. This design makes it easy to remove the heater for maintenance or replacement. Screw plug heaters are easy to install and are suitable for a wide range of industrial food manufacturing applications. These heaters are energy efficient and often used for direct heating of chemicals and fluids.
Used Product Ad posted 18 hours ago in Other Cooling and Heating Equipment by Jason Goldstein
Ordered two Glycol to Air Evaporators for our new cold room but project changed during the 12 week lead time for production and now only need one. Still in crate from manufacturer. MSA34A-0623BCM NEMA 4x Non-Fused Motor Disconnect included Built to run on 460v for efficiency, Glycol to Air. Available immediately, paid $6,000 for each but willing to sell one quickly for $4,000
New Product Ad posted 2 days ago in Other Cooling and Heating Equipment by Elise Belknap
Like NEW - G&D Heater model 12.5 includes: -Low watt density heating element, which avoids damage to glycol system from high heat contact -Glycol circulation pump -Dynamic Fluid bypass valve -All insulated copper piping -Insulated stainless steel glycol reservoir -Powder-coated steel frame -Stainless steel housing -4 brass quick disconnects, which allows you to heat up to 4 tanks at once without the loss of glycol. -Heavy duty rubber on steel casters for easy portability -ETL 508A listed complete control panel w/single point electrical connection, breakers , starters & safety switches -High Temp shut off and alarm -NEMA 3R Digital temperature controller for simple operation in damp environments -25 ft. power cord -1 set of 20 ft. glycol hoses w/ female quick disconnects -Factory-Run tested More information available: https://gdchillers.com/products/gd-12-5/?productRequest=GD%20%E2%80%93%2012.5
Used Product Ad posted 2 days ago in Other Cooling and Heating Equipment by Jon Treloar
Used pro refrigeration 3/4 hp ( I believe). 220v, single phase. Works well. Has surface rust on the top of the lid exterior.
Used Product Ad posted 2 days ago in Other Cooling and Heating Equipment by Nichole Galenski
OCH Series Outdoor / Indoor Rated Quartz Electric Infrared Heaters Total of 3 Units Lightly used; were up above entrance for one Winter (about 3 months of use) Features: Stainless Steel Housing 208 Volts 3000 Watts Each unit is 59" long/5.375" wide Frosted Quartz Tube heating elements (included) Listed for suspended, total exposed (outdoor) and indoor spot heating applications Finish: Corrosion resistant stainless steel 24 guage housing 60 Degree Symmetric Heat Pattern Gold anodized Aluminum reflector and end caps Electrical enclosure assembled to the end of the heater housing and (2) 6” long wires for direct field connection Can either be hung or surfaced mounted using mounting brackets with allow up to a 45 degree horizontal tilt adjustment Made in the U.S.A. Mounting Clearance: 6-3/4” from ceiling; 30” from vertical surface 85” from face of heater to combustible surface 36” from another heater Originally purchased for $265 each; Looking for...
Used Product Ad posted 2 days ago in Other Cooling and Heating Equipment by Nichole Galenski
MB® 7 bbl Electric Hot Liquor Tank | Energy Efficient Insulated Walls | Oversized for Single Fill Mashing & Sparging | T.C. Sanitary Ports | All Fittings Included | Passivated Ready to Use | American Engineered | Ships from USA Insulated walls for safety and energy efficiency. Made from 304 stainless steel with passivated internal 2B polished finish Oversized volume large enough for mashing and sparging without needing to top off. Features sight gauge and tapered bottom with center drain Made with condensation trap to keep flue condensation out of your liquor Internal float switch located just above the heating elements to protect the elements from running dry Ships domestically from within the contiguous United States MB Pro Brewing Systems are very well constructed and represent an amazing overall value. They also boast a very impressive feature set. Our 7 bbl Pro Electric Hot Liquor Tank features three 15,000W heating elements, insulated walls...
Used Product Ad posted 3 days ago in Other Cooling and Heating Equipment by Jeff Empric
Mint Condition 60 BBL HLT Purchased and never used. Buyer pays rigging and shipping.
Used Product Ad posted 5 days ago in Other Cooling and Heating Equipment by M S
25bbL/30hL steam jacketed Hot Water Tank. Was part of a 3 vessel brewhouse, but already have a hot liquor tank so looking to sell. 7.8' W x 9.1' Tall 1.5" CIP Port 2" Bottom Port 2 steam jackets Manway door w/ site glass on top Two steam electric solenoids See photos attached below - can send drawings in email (file too large to upload to ad). Currently Decommissioned and in contained storage. Buyer responsible for rigging/shipping. $4500 USD OBO - make an offer, motivated to sell fast
Used Product Ad posted 1 week ago in Other Cooling and Heating Equipment by David Holm
Stout Electric HLT Tank only with 2 butterfly valves and HERMS coil. HL290RHC-EL-INS (2569). 7 bbl / 290 Gal Insulated Hot Liquor Tank with thermowell, tangential inlet, raised stainless HERMS coil, sight glass, (4) electric element ports, (1) level sensor port, 1/2-in. NPT water inlet, upper overflow port. Clamps, gaskets, lid with 3“ TC port for CIP and/or venting. HERMS Coil: 3/4” OD x 75‘ long Tank: 41.5” diameter x 72”H
Used Product Ad posted 1 week ago in Other Cooling and Heating Equipment by Ryan Evenson
This heat exchanger worked great for us for about 3 years on our 7 bbl brew house until we upgraded to a 15 bbl system. Buyer responsible for shipping from Hallock, Minnesota.
Used Product Ad posted 1 week ago in Other Cooling and Heating Equipment by BibcoBrew
20x20x20 Crown Tonka cooler for sale. This could be reconfigured to give you a larger footprint. Garage door opener included. Purchased brand new in 2017. Can be taken down and ready to ship for additional cost.