New Product Ad posted 11 months ago in Other Cooling and Heating Equipment by Wattco
Screw Plug heaters from WATTCO™ consist of hairpin tubular elements that are brazed or welded into a machined pipe thread fitting, (normally an NPT fitting for North American standards) which are then screwed directly through a threaded coupling in the tank wall or vessel, or installed in pipe. Screw plug heaters are an easy way to heat up solutions in smaller containers that also require controls. Mechanical thermostats or Digital control panels can be used with these immersion heaters to help reach target temperatures with great accuracy meeting your project objectives. Additional thermowells can be installed for high limit temperature probes to help protect your liquid and processes.
Wattco Screw Plug Immersion Heaters
New Product Ad posted 11 months ago in Other Cooling and Heating Equipment by Wattco
Screw Plug Immersion Heaters Screw plug heaters – sometimes referred to as threaded immersion heaters – are constructed of long heating elements in the shape of tubes which are welded into the interior of the heater. The assembly is screwed, plugged, or threaded directly into the system through an opening lined with threadbare – hence the names screw plug heater and threaded immersion heater. This design makes it easy to remove the heater for maintenance or replacement. Screw plug heaters are easy to install and are suitable for a wide range of industrial food manufacturing applications. These heaters are energy efficient and often used for direct heating of chemicals and fluids.
Used Product Ad posted 6 days ago in Other Cooling and Heating Equipment by Nick Fuentes
Never used 10 BBL Hot Liquor Tank (HLT). We purchased it for use but went with a tankless water instead. Forced air burner, also not used, included. Buyer responsible for shipping.
Used Product Ad posted 5 days ago in Other Cooling and Heating Equipment by Liam Wurtz
Great condition. Some marring of stainless on floor of the interior. Scaling up to 10 barrel HLT and looking to sell this one. $6500 or best offer Features 1.5” Tri-clamp Base port with butterfly valve 1.5” Tri-clamp inflow Side port Lid with 2” and 1.5” tri-clamp ports 2” side port for heating Element ¾” port and housing for temp probe Watlow BHN717N3W-40 Tubular Plug Heater: 2” 3 Element 240v 9kw Other Information Easy hook-up to thermostat, electric No built in recirculation Approx. 12 hour heat up
New Product Ad posted 7 days ago in Other Cooling and Heating Equipment by Dale Heinlein
55 GALLON DRUM OF BRAND NEW GYLCOL ON A PALLET NEVER OPENED 100% GYLCOL WILL UPLOAD IMAGE SOON $800
Used Product Ad posted 4 days ago in Other Cooling and Heating Equipment by Jason Pinkowski
Walk-in cooler with CoolBot and AC unit. This unit comes with a floor and a ramp to easily get in. 230v LG AC unit CoolBot set up is easy to set up and works great. Fits Perfectly into a 10' U-Haul Truck!
Used Product Ad posted 4 weeks ago in Other Cooling and Heating Equipment by Adam Shay
AGC Heat Exchanger, Model PRO2-SH, S/N 4169. Dims 24"W x 7'L x 5'3"H. Other equipment alco available.
Used Product Ad posted 4 weeks ago in Other Cooling and Heating Equipment by Adam Shay
Alfa Laval Heat Exchanger. Model MO - MF MCS, 1997, S/N 301-04-75540. All available equipment can be found at www.carolinaprocessequipment.com .
Used Product Ad posted 2 weeks ago in Other Cooling and Heating Equipment by Robin Stevens
We have used this pasteurizer for the past 7 years. It has been a great piece of equipment and is perfect for companies producing 20-100k gallons per year. To pasteurize we filled 3 macro bins with cans (works with bottles as well) loaded the 3 bins in to a large SS cage then lowered with a forklift in to a SS insulated tank. Please see specs below. Bath Pasteurizer: Total Cost: $30,000 Tank Dimensions Exterior - 6' x 6' x 5' Internal - 5' x 5' x 4.5' Cage Dimensions 52" x 44" x 5' 66 Macro Bins FV12 dimensions: External: 45" (L) x 48" (W) x 16.5" (H) Internal: 42.5" (L) x 45.25" (W) x 12" (H) Hot Water Source (Not included, Available for $1000) 2 x Rinnai Tankless Hot Water Heaters @ 199,000 BTU per unit Pasteurizer Capabilities Cases of 12oz cans per Macro Bin: 22.8...
Used Product Ad posted 2 weeks ago in Other Cooling and Heating Equipment by Chris French
We bought this burner a while back but ended up not needing it. It's brand new, never used and in perfect condition. Does 230K-700K BTU. Perfect for 7-15bbl direct fire system. Save some money and by this new one for a used price!
Used Product Ad posted 6 days ago in Other Cooling and Heating Equipment by Jason Goldstein
Ordered two Glycol to Air Evaporators for our new cold room but project changed during the 12 week lead time for production and now only need one. Still in crate from manufacturer. MSA34A-0623BCM NEMA 4x Non-Fused Motor Disconnect Built to run on 480v for efficiency. Available immediately, paid $6,000 for each but willing to sell one quickly for $4,500
Used Product Ad posted 4 weeks ago in Other Cooling and Heating Equipment by Michael Killgore
Product description Our Kreuzmayr chamber pasteurizer units are designed to pasteurize products which have already been filled into bottles or cans. The KKP 960 chamber pasteurizer is heated through direct steam injection into the chamber, used to heat the product to the desired pasteurization temperature. Air circulation within the steam chamber is facilitated by a stainless steel air blower. The steam is injected, through a pneumatically activated steam valve, into an air channel for optimized steam mixing. There is a condensate drain on the bottom of the chamber, as condensate can not be recirculated in these systems. The thickness of the insulation is 40-100 mm in the chamber walls.