Wattco Screw Plug Immersion Heaters
New Product Ad posted 11 months ago in Other Cooling and Heating Equipment by Wattco
Screw Plug Immersion Heaters Screw plug heaters – sometimes referred to as threaded immersion heaters – are constructed of long heating elements in the shape of tubes which are welded into the interior of the heater. The assembly is screwed, plugged, or threaded directly into the system through an opening lined with threadbare – hence the names screw plug heater and threaded immersion heater. This design makes it easy to remove the heater for maintenance or replacement. Screw plug heaters are easy to install and are suitable for a wide range of industrial food manufacturing applications. These heaters are energy efficient and often used for direct heating of chemicals and fluids.
New Product Ad posted 11 months ago in Other Cooling and Heating Equipment by Wattco
Screw Plug heaters from WATTCO™ consist of hairpin tubular elements that are brazed or welded into a machined pipe thread fitting, (normally an NPT fitting for North American standards) which are then screwed directly through a threaded coupling in the tank wall or vessel, or installed in pipe. Screw plug heaters are an easy way to heat up solutions in smaller containers that also require controls. Mechanical thermostats or Digital control panels can be used with these immersion heaters to help reach target temperatures with great accuracy meeting your project objectives. Additional thermowells can be installed for high limit temperature probes to help protect your liquid and processes.
Uni-Pak Can Warmer ( $10,000 )
Used Product Ad posted 53 mins ago in Other Cooling and Heating Equipment by Adam Shay
Uni-Pak Can Warmer, Model 624RH, S/N 87-4254. Complete list of equipment can be found at www.carolinaprocessequipment.com .
Used Product Ad posted 55 mins ago in Other Cooling and Heating Equipment by Adam Shay
Alfa Laval Heat Exchanger. Model MO - MF MCS, 1997, S/N 301-04-75540. All available equipment can be found at www.carolinaprocessequipment.com .
AGC Heat Exchanger ( $7,000 )
Used Product Ad posted 1 hour ago in Other Cooling and Heating Equipment by Adam Shay
AGC Heat Exchanger, Model PRO2-SH, S/N 4169. Dims 24"W x 7'L x 5'3"H. Other equipment alco available.
Douglas Heat Tunnel ( $25,000 )
Used Product Ad posted 1 hour ago in Other Cooling and Heating Equipment by Adam Shay
Douglas Heat Tunnel. Tunnel opening 14"H x 36"W. On pallet, 7'8"W x 25'6"L x 7'1"H.
Used Product Ad posted 4 days ago in Other Cooling and Heating Equipment by chad phillips
2 stage heat-x in great condition. Always well maintained. By-pass loop for better whirlpool.
Used Product Ad posted 5 days ago in Other Cooling and Heating Equipment by Jason Pinkowski
Walk-in cooler with CoolBot and AC unit. This unit comes with a floor and a ramp to easily get in. 230v LG AC unit CoolBot set up is easy to set up and works great. Fits Perfectly into a 10' U-Haul Truck!
Used Product Ad posted 5 days ago in Other Cooling and Heating Equipment by Liam Wurtz
Great condition. Some marring of stainless on floor of the interior. Scaling up to 10 barrel HLT and looking to sell this one. $5500 or best offer Features 1.5” Tri-clamp Base port with butterfly valve 1.5” Tri-clamp inflow Side port Lid with 2” and 1.5” tri-clamp ports 2” side port for heating Element ¾” port and housing for temp probe Watlow BHN717N3W-40 Tubular Plug Heater: 2” 3 Element 240v 9kw Other Information Easy hook-up to thermostat, electric No built in recirculation Approx. 12 hour heat up
Used Product Ad posted 5 days ago in Other Cooling and Heating Equipment by Josph Hallock
We have approximately 33 nine foot sections of GF Cool-Fit piping, 90mm (3") ID with 32mm (1") ID drops. It was the piping for our glycol system which was used for a 30bbl system with six fermenters, two brite tanks, a 30bbl CLT and a 7bbl pilot system with two 7bbl fermenters, a 7bbl brite and 2 15bbl Uni-tanks. There are 19 drops and 15 of them have the 110V electric ball valves. The return lines all have manual shutoff valves. There are eight 90 degree elbows in 90mm and four 90mm shutoff valves. Comes with hangers for every four feet of pipe, extra fittings for the 32mm and 90mm piping including 42 90mm couplings for gluing the sections of pipe together so it can be cut to fit your application. It is mounted on two pallets and ready to ship. This piping cost $27,000.00 when installed in 2014. The...
Used Product Ad posted 6 days ago in Other Cooling and Heating Equipment by Michael Partheymuller
I am selling my Kreyer Glycol Single Fan Unit (msrp $644.99) used for chillin walk in coolers. Included is a FermFlex Defrost Controller(msrp $1499.99) and Defrost Kit (msrp $404.99). The kit was purchased new from MoreBeer in October 2022. The unit is capable of cooling a 1750 sq.ft. room (1/3 ton cooling capacity) using your existing glycol chiller and includes a solenoid and connection cable for easy integration. The fan unit requires a 220v electrical connection. It has been disconnected and is currently in storage. Happy to send pictures or answer any questions. Buy to pay shipping.
Used Product Ad posted 6 days ago in Other Cooling and Heating Equipment by Jason Goldstein
Ordered two Glycol to Air Evaporators for our new cold room but project changed during the 12 week lead time for production and now only need one. Still in crate from manufacturer. MSA34A-0623BCM NEMA 4x Non-Fused Motor Disconnect Built to run on 480v for efficiency. Available immediately, paid $6,000 for each but willing to sell one quickly for $4,500