Chillers

New Product Ad posted 8 months ago in Chillers by G&D Chillers, Inc.

G&D’s new energy efficient Micro Channel condensers are designed for less power draw while using up to 70% less refrigerant. This means a lower GWP and lower operating costs. For more info. visit Gdchillers.com or call 800.555.0973 Learn How to Maximize Efficiency in your Chiller - G&D Chillers  

New Product Ad posted 9 months ago in Chillers by KIG Inc.

  New, USA made 6 hp / ton Glycol Dual Circuit Air Cooled Chiller. This is a USA made chiller with reservoir tank and centrifugal pump.  This chiller is a "TRUE" Dual Circuit Chiller - it's almost like two separate 3 hp chillers side by side, sharing a common tank and pump.  So, two compressors, two condensers, two evaporators, two sets of three of adjustable pressure switches (low / hi / fan) for SIX total.  It's the ultimate in redundancy for optimum uptime.   .  Power is 208/230 THREE phase power.  (we can also have this made in 460 volt and single phase) Model KIG ColdRush GV72CK3-DCRLT Made in the USA Latest R410a refrigerant. Dual Fan type condenser 72,000 btu/hr at 55F nominal fluid temps ~36,000 btu/hr at 28F glycol fluid temps This unit is 208/230 volt, THREE phase power - Ampacity 33 / Max Fuse 43 amps Limit devices: high /...

New Product Ad posted 3 months ago in Chillers by Thermal Care

Thermal Care recently updated their chiller product lines with EPA approved low Global Warming Potential (GWP) R-454B  and R-513A refrigerants. This release is significantly ahead of upcoming legislation to phase out high-GWP refrigerants that contribute to climate change. Governments around the world are implementing regulations to phase out refrigerants they believe pose too much risk to global warming including R-134a and R-410A which are commonly used in chillers. The multitude of rulings and enforcement dates, along with the tight deadlines of state regulations have left manufacturers facing challenges in complying.  Combined with the fact that low-GWP refrigerants have different thermodynamic properties than high-GWP refrigerants, so major component changes are required, many companies may find themselves unprepared or unable to produce equipment with the new components needed. Thermal Care has researched and prepared for these changes for the past two years and is ready to provide the appropriate solutions to meet...

New Product Ad posted 3 months ago in Chillers by Thermal Care

Thermal Care offers an outdoor packaged chiller, designed with the flexibility to provide process cooling year-round, with a wider range of operating conditions than comparable models. Accuchiller KSE Series chillers are fully packaged, integral air-cooled outdoor units manufactured to work in the harshest weather environments. Units are factory tested and ready for easy installation; just run piping and power to the unit and it is set for operation. One of the great features of this new outdoor chiller is the variety of climates where it can be used. Energy saving variable speed EC fans allow the chiller to withstand ambient conditions from -20°F to 125°F. As an added bonus, the process fluid circuit allows for more flexibility with a set point temperature range from 20°F to 80°F. KSE Series chillers come with an advanced outdoor PLC control system with ModBus TCP/IP & RTU and a 7-inch color touch screen similar...

New Product Ad posted 2 months ago in Chillers by J C Younger Company

Currently we have 5 ready to be shipped. Five Horsepower Glycol Brewery Chiller Unit Breweries need to keep their equipment cool in order to operate efficiently, and now there's a new JC Younger chiller that can do just that. This industrial-strength chiller is designed for indoor use and can be set to as low as 25 Fahrenheit. It has a power requirement of 208/230 volt 1 phase and one at 3 phase, making it perfect for breweries of all sizes. Plus, the JCY Deluxe Brewery Industrial Chiller comes with an oversized 25-gallon glycol tank and a variety of other features that make it indispensable for any brewery looking to stay efficient and up to code. https://prochiller.com/chiller-data-sheet-fill.php/?mod=PE105F1R420-A-V* Industrial Chillers for the Brewery Industry JCY industrial chillers are specially designed and built to meet and exceed the demands of brewing industry professionals. Industrial Chiller Specifications Unit power requirement 208/230 volt 1 phase....

New Product Ad posted 5 days ago in Chillers by Pro Refrigeration, Inc.

Check out our INCREDIBLE new Glycol pricing - reduced by over 50%! Shield your system with added corrosion protection for mild steel, copper, and aluminum during long-term use in closed systems. Our non-toxic and non-corrosive formula offers enhanced flow, lubrication, and burst protection in extreme temperatures. Ship with your next system, or stock up for the season! *100% Concentration, Pre-Dyed Blue.

New Product Ad posted 9 months ago in Chillers by KIG Inc.

KIG (Keith Industrial Group, Inc) is the leading supplier in the USA of New Johnson Controls / York Air Cooled Chillers in the 20 to 320 ton range, providing ~ 100 units per year.  This unit is available now due to a cancellation, it just arrived 1st week of December.  It is Model YLAA-0089SE46VSD.  We are typically offering this unit out in the April timeframe so this is a great opportunity if your brewery/winery is in need of this size. ~ 82 tons nominal "glycol package" , meaning electronic exp. valves, etc., allowing glycol running temps down into the 22F range at 25f, effective tonnage with de-rating is ~ 58 tons (~ 700,000 btu's/hr).  If you are reading this on pro-brewer you most likely understand what this means. 6 scroll compressor.  Brazed Plate Evap.  Dual circuits.  Hot Gas on circuit A.  Control Transformer.  Louvers on top. 460 volt 3 phase...

New Product Ad posted 6 days ago in Chillers by O'Neill's Brewing & Equipment Company

NEW GLYCOL SYSTEMS - 3 HP TO 50 HP   SHORT LEAD TIMES -Rugged and Dependable -Indoor or Out door use -duel compressors for 100% up time -digital programmable controls -pre=charge with Freon For Best results contact us directly: O'Neill's Brewing Systems LLC info@beer-tanks.com www.beer=tanks.com 203-217-0700    

New Product Ad posted 8 months ago in Chillers by G&D Chillers, Inc.

VERTICAL AIR SERIES The Vertical Air series are complete turnkey packaged chillers ideal for high volume operations. To maximize capacity and efficiency, each chiller contains efficient semi-hermetic compressors that are partnered with an oversized vertical discharge condenser. LEARN MORE ABOUT THE GD VERTICAL AIR SERIES We’re here to help 24/7. We’ll respond back to you by email or phone to get your questions answered as quickly as possible. Be sure to give us a call anytime at 800.555.0973or visit us online GDChillers.com CONTACT US INFO@GDCHILLERS.COM 800.555.0973

New Product Ad posted 8 months ago in Chillers by G&D Chillers, Inc.

DESCRIPTION The innovative Multi Stage large chiller package provides all of the efficiency that comes with chillers outfitted with multiple compressors. Capacities ranging from 10 HP to 27 HP are sure to meet even the most chilling of demands. Every circuit is wired separately, giving each compressor equal run time over the life of the large chiller. These are designed to run on an as needed basis, which is ideal for applications with varying load requirements. The redundancy of multi-stage refrigeration circuits ensures that your process and production will never stop. KEY SPECS (WxLxH): 48” x 89” x 66” Tank Volume: 115 Gallons Process Pump: 1.5 HP GPM @ 25PSI: 40 gpm Operating Weight: 2350 lbs. Connection Size: 1.5"

New Product Ad posted 8 months ago in Chillers by G&D Chillers, Inc.

DESCRIPTION Our Micro Chill Series offers compact chillers available in 3 HP, 5 HP and 7 HP to cover the range of needs in smaller process cooling applications. With an oversized stainless steel reservoir and heavy duty process pump with built-in fluid dynamic bypass valve, these compact chillers provide precise cooling with the same quality components as their larger siblings, but in a more compact design with an equally compact price. KEY SPECS (WxLxH): 34” x 61” x 50” Tank Volume: 60 Gallons Process Pump: 1.5 HP GPM @ 25PSI: 40 gpm Operating Weight: 1450 lbs. Connection Size: 1"

New Product Ad posted 8 months ago in Chillers by G&D Chillers, Inc.

Our Micro Chill Series offers compact chillers available in 3 HP, 5 HP and 7 HP to cover the range of needs in smaller process cooling applications. With an oversized stainless steel reservoir and heavy duty process pump with built-in fluid dynamic bypass valve, these compact chillers provide precise cooling with the same quality components as their larger siblings, but in a more compact design with an equally compact price. KEY SPECS (WxLxH): 34” X 61” X 50” Tank Volume: 60 GALLONS Process Pump: 1.5 HP GPM @ 25PSI: 40 GPM Operating Weight: 1450 LBS. Connection Size: 1"