Grain Storage and Handling Equipment

Reset - Viewing: Used Product Ads, Category Grain Storage and Handling Equipment

Used Product Ad posted 8 hours ago in Grain Storage and Handling Equipment by Doug Gaumer

15bbl Grist case and Flex auger, motor, receiver.

Used Product Ad posted 2 days ago in Grain Storage and Handling Equipment by Jeff Tobin

This 60,000 lb. (approx) capacity Meridian silo is in very good condition. It has smooth steel walls and a smooth conical bottom. It was new in 2007. We bought it used in 2018. Unfortunately we have been unable to find a way to make it work with our brewery configuration and have decided to sell it. The price includes a choretime screw auger conveyor with approximately 50 feet of pipe and auger. As seen in the pictures the silo is on its side and ready to load onto your truck. Buyer is responsible for rigging and for crating up or otherwise packing the choretime components. Overall tank dimensions (approximate) 12' diameter, 27' height.  

Used Product Ad posted 3 days ago in Grain Storage and Handling Equipment by DESTIHL BREWERY

For Sale:  12" Pneumatic Knife Gate Valve, rated for 150 psi, crated, in like-new condition. Terms: $350.00.  Already crated and available for immediate shipment. Price is as-is, FOB Normal, IL (i.e., Buyer responsible for freight/shipping).  100% non-refundable down payment via bank wire to secure purchase and prior to loading/shipping. Viewing by appointment only. To schedule an appointment to view or to obtain more information or to otherwise submit an offer, please email only serious inquiries to office@destihl.com (replies to this post on-line will not be routinely checked).

Used Product Ad posted 4 days ago in Grain Storage and Handling Equipment by Scott Denhart

Super sack unloader, low headroom with load cells 8K,  specialty malt hopper 750 dollars, and auger 1K.  These can be parted out.

Used Product Ad posted 4 days ago in Grain Storage and Handling Equipment by Jackwk5

We are selling a mix of new and used milling and grain handling items. New: 6,000 lb capacity Grist Case 4 Load cells for grist case Used Motor and drive for 6"(believe this is actually Din 150) with pipes, chain and disk. Motor and drive for 3"(believe this is actually DIn 85) with pipes and disk Kunzel 4 roller mill, about 1200 kg/hr max speed 2 grain hoppers with motor and auger to feed chain and disk   Contact Jack @ jacksabby.com for more information.  

Used Product Ad posted 1 week ago in Grain Storage and Handling Equipment by Daniel Diaz

Malt Mill model XW-G3. 500 kg/hr capacity, 1.5 kw motor, 208v-240v 3 phase power. Brand new. Buyer pays shipping. $2500.00 Contact Travis Smith via email to Travis@twelvetalons.com with the subject line “Grain Mill”.

Used Product Ad posted 1 week ago in Grain Storage and Handling Equipment by Michael Killgore

Free was used for malted barley for brewing beer, has to be taken apart to remove from building. Holds 48000 lbs of malt. You can take the auger too. 1. ALL of the equipment to move this tank without damaging the floor of a warehouse, lift onto a trailer, and haul the tank. 3. Experience in rigging. 4. Proof of business’s liability insurance. Free but you must remove from the warehouse and load it yourself with your own equipment.

Used Product Ad posted 1 week ago in Grain Storage and Handling Equipment by Josph Hallock

Flex-Flo Model 500 grain auger.  Approximately 60 feet of coil, drive motor and boot/ transfer plate for hopper. Operates on a 20 amp 220V circuit. Uses Flex Flo 500 PVC pipe which can be ordered from Flex Flo to fit your layout. The bearing and end unit have been replaced.

Used Product Ad posted 2 weeks ago in Grain Storage and Handling Equipment by irishod89

FeedPro Grain Weighing Systems: 3 available, asking $2,500 each Used to weigh grain from the bulk silo and bag stand/tote assembly. They have an internal auger and weigh scale. They control the flow of grain accurately and handle a flow rate of up to 7,200#’s/hour. Purchased new in 2014. Approximately 37" x 13" x 48" Also available is the main computer box that controlled all three although you don't necessarily need this incorporated, they can be run on their own. It was used to control and relay signals to the mill, etc. Additional photos available upon request.

Used Product Ad posted 2 weeks ago in Grain Storage and Handling Equipment by Joshua Johnson

Used Flex Auger without PVC pipe, Will need some fixed wiring. USED CONDITION

Used Product Ad posted 2 weeks ago in Grain Storage and Handling Equipment by Stoney Head

2 Roll grain mill for sale, side by side 14" rollers, hopper on top, grain shoot on bottom, adjustable crush size, access panels for easy cleaning, must have 208/230V 3 phase power supply, 26A.  We purchased this brand new in 2013 and it has been a workhorse for our brewery.  Currently set up for plug in to run but can easily be converted to a wall switch.  New drive belts replaced 2019.  Comes with back up belts.  Weighs roughly a ton (2000 lbs). PRICE REDUCED $3000.00 You pay shipping from Reno, Nevada (89511)

Used Product Ad posted 2 weeks ago in Grain Storage and Handling Equipment by Bobby Myers

Brand new Grist case manufactured by SK Škrlj in Slovenia for 7-10BBL brewhouse. Was included in our brewhouse purchase but we do not have the vertical space for it. Still wrapped and palletized and ready to ship.   Description from Manufacturer: Nominal volume in l: 360 Nominal volume [bbl]: 3 Material: EN 1.4301/ASTM304 External visible surface is brushed with SCOTCH BRITE material. Final roughness isn't defined. Brushing leads to a uniform and aesthetic surface quality. Internal product contact surface is a smooth, bright, and reflective 2R (BA) surface without further treatment. Stainless steel is protected against scratches with protective film.

To top