Bottling Equipment

Reset - Viewing: Used Product Ads, Category Bottling Equipment

Used Product Ad posted 4 weeks ago in Bottling Equipment by AgerTank

Now Available - A complete filling line set up for glass bottles with an ROPP aluminum closure.  This line ran non carbonated water for a brief time and would be well suited for distilled spirits, water, or other non carbonated products.  Details follow- Item is a used, ABE/Norland model GlassPak 66 bottling line. The line is rated at up to 70 BPM and includes the following: -Tri-Block 12 clamp rinser / 12 valve filler / 6 head capper. The capping heads are 28mm ROPP. The safety guarding package is glass doors w/safety interlocks. Operation of the machine is clockwise (left to right). One set of change parts for glass bottles is included. Previous use was in bottled water facility. Power requirement is 208-240 volt/3-phase. -48" diameter dump/accumulation (pack-on) disk -Infeed conveyor for the Tri-Block rinser/filler/ROPP Capper. -Discharge conveyor from the Tri-Block -Quick Dry 66 air knife external bottle blower -Videojet...

Used Product Ad posted 8 hours ago in Bottling Equipment by Todd Bellomy

A great workhorse of a bottling line that has been very well maintained. Easy to fix, maintain, modify, etc. and would be perfect for your non-carbonated needs. Bottles can be sourced from China, 7oz (207ml), twist-off beer crown without modification. Built for this BOTTLE Most of line is 3 phase / 208 - the labeller is single phase 120 This is a full line: > pack on and off tables > washer >12 head filler (non-carbonated) > 6 head capper (beer crown) > in-line labeller If you are a packaging line pro, I'm sure this line could be modified for other bottle sizes. Serious inquiries only please.

Used Product Ad posted 17 hours ago in Bottling Equipment by Ryan Eaton

I purchased this Bottling line from the original owner in 2022.  It has been disassembled and in storage since purchase.  It was intended for our craft soda business but ended up being too large to fit in our facility.  It was working at the time of purchase.  I'm sure it will need servicing and a little TLC to get it up and running for your brewery but it is a beast of a machine.  The major parts include a depalletizer, accumulation table, paste labeler, all conveyance and motors, Control units, 18 head rinse fill and cap, dryer tunnel, and pack off table.  The only issue that we are currently aware of is a bad hydraulic seal on the paste labeler.  It leaks.  Not sure if it's reparable or needs to be replaced.  Local pickup, or shipping coordinated by buyer.  I can no longer store this item where it has been...

Used Product Ad posted 17 hours ago in Bottling Equipment by Cara Naeger

Automatic counter-pressure filling with 6 fill-heads.  Automatic crowning with capper.  Semi-automatic rinsing.  Spec sheet and pictures attached.  Item is in a large wooden crate and ready to go.  Buyer to pay for shipping.

Used Product Ad posted 17 hours ago in Bottling Equipment by Cara Naeger

4 head capping machine; used.  We were using it before upgrading to a new canning machine.  No longer use bottles.  Please reach out for questions or negotiation. $1900 obo

Used Product Ad posted 17 hours ago in Bottling Equipment by Cara Naeger

9 boxes of empty beer bottles and 1 big box of packing materials. $400 negotiable.  Please reach out for more information or negotiation.

Used Product Ad posted 17 hours ago in Bottling Equipment by Cara Naeger

Heavy, black metal manual corker.  Great condition; used.

Used Product Ad posted 17 hours ago in Bottling Equipment by Cara Naeger

Black press; used.  $900 obo. Please reach out for questions or to negotiate.

Used Product Ad posted 3 days ago in Bottling Equipment by Geoff Craven

Used case erector. This is designed to manually feed each box in and glue the bottom.  You can run roughly 25 cartons a minute through it. This was used in a brewery primarily for erecting 12oz cartons. It can be changed to accommodate different size cartons. It is in working condition. It could use some maintenance however. Requires 202 power. Buyer responsible for shipping.

Used Product Ad posted 3 days ago in Bottling Equipment by Chris Schofield

2 head bottling machine perfect for a smaller operation looking to improve fill speed and quality. Configured to fill Berlin Packaging BN050 500ml bottles with 26mm crown caps but can be configured for other sizes. Fill speeds of 8-10 bpm depending on product This machine was used twice during the training runs with the Meheen technicians and once during production. The brewery had to go in a different direction and it's been in storage ever since.    

Used Product Ad posted 6 days ago in Bottling Equipment by Cullen Dwyer

This rinser is configured to convey bottles from a height of approximately 13 feet, and out-feed in the opposite direction at a height of 4 feet.  It grips bottles gently from the side with rubber chain links, inverts them for rinsing, allows drainage to a catch-pan, and turns them upright again.  In-feed section includes idler cog and frame for 4"-wide conveyor chain, as well as "slowerator" side-belts to ensure proper spacing of bottles.  Vertical section allows opportunity to date-code bottoms of dry bottles.  Easily adjusts for various bottle widths with the turn of a single wheel.  Overall dimensions: 15'L x 34"W x 15'H. This is an older machine that was recently decommissioned, and has operated trouble-free for many years.

Used Product Ad posted 6 days ago in Bottling Equipment by Cullen Dwyer

Complete line, currently configured to form mother cartons for 12oz bottle 6-packs.  Included two Pearson 6-pack erectors, Pearson 202 case-former, and multi-packer to stuff the 6-packs into the case.  Also includes driven conveyors: straight chain from 6-pack erectors to multi-packer, 90-degree bend chain from case-former to multi-packer, straight belt from multi-packer (driven accumulation) and 90-degree out-feed belt.  Also includes idle out-feed idle rollers with 90-degree bend.  Case former is missing hot glue pot and heated glue hose. Overall dimensions of current configuration are approximately 42' x 23'.  The line was recently decommissioned.  Priced "to go" as we urgently need to free up this space.

To top