New Product Ad posted 1 year ago in Brewhouse or Brewing Systems by Keg Co
10BBL brewhouse Mash Tun/ Lauter Tun Kettle/ Whirlpool Platform Hot water tank Control system pumps Valves Tanks are made of stainless steel 304 Stainless steel beer keg, keg filling and cleaning machine Need brewhouse and kegs? Call us at +86 -15968945186 or drop me an email at kevin@kegco.com.cn Obey your thirst, Take time to indulge, Let's make things better http://www.kegco.com.cn
New Product Ad posted 12 months ago in Hops by Union Jack Tools
The brushes in this 5-piece tube and valve brush kit are tough enough to handle a wide variety of applications in your brewery. The stainless steel shafts provide great flexibility, making these the best hygiene tube and valve brushes available anywhere. All tube brushes are made with low water absorption polyester bristles and polypropylene grips. Available in 5 colors to assist with your HACCP / FSMA food safety compliance. The following brushes are included in this kit: 2.4" x 19.4" (Medium Stiffness) 2.0" x 20.1" (Medium Stiffness) 1.5" x 19.9" (Stiff) 0.9" x 19.9" (Stiff) 0.4" x 19.9" (Stiff) Made of FDA-compliant materials If you need a flexible rod brush for cleaning hard-to-reach areas or curved pipes, check out our 9-Piece Tube & Value Brush Kit.
Wattco Screw Plug Immersion Heaters
New Product Ad posted 12 months ago in Other Cooling and Heating Equipment by Wattco
Screw Plug Immersion Heaters Screw plug heaters – sometimes referred to as threaded immersion heaters – are constructed of long heating elements in the shape of tubes which are welded into the interior of the heater. The assembly is screwed, plugged, or threaded directly into the system through an opening lined with threadbare – hence the names screw plug heater and threaded immersion heater. This design makes it easy to remove the heater for maintenance or replacement. Screw plug heaters are easy to install and are suitable for a wide range of industrial food manufacturing applications. These heaters are energy efficient and often used for direct heating of chemicals and fluids.
New Product Ad posted 12 months ago in Fermenters by Ripley Stainless Ltd.
Fermentation Tanks Dimensions: 48” ID x 53” OD x 72” sidewall OAH 141” Nominal capacity plus 25%, ASME dished head, 1 ½” removable CIP c/w rotating sprayball plus 1 ½” tee, 4” dry hop, 60˚ cone angle, cooling jacket 35-40% sidewall coverage plus cone jacket-max 20 psi, (1) 9” thermowells, 1 ½” PRV, 2” insulation and cladding, R-12 value (cone & sidewall only), side oval manway, K33 sample valve, 1 ½” J-pipe drain, 1 ½” racking, 4-5 stainless legs, c/w adjustable feet. Maximum tank pressure 14.9 psi, all 304 2B stainless steel OD mig welds and strip polished, ID welds tig welded and heat stain removed Qty: 7
New Product Ad posted 12 months ago in Kegs and Kegging Supplies by Schaefer Container Systems North America Inc.
Schaefer Container Systems is the family owned industry leader in innovation. We provide a wide variety of keg styles, all manufactured from the highest quality 304 Stainless Steel. From the classic, all stainless steel construction of our SUDEX KEG, to completely self contained dispensing systems, such as our Party Keg and FreshKEG. Custom branding is available to turn your kegs into brand ambassadors to your customers, etching, printing, embossing, even custom color chimes with our ECO KEG technology or custom body colors with PLUS KEG. Schaefer technology is ideal for Craft Brewers, offering technical and cost advantages. Prompt shipment is available from stock via multiple locations, nationwide. Reach out to Schaefer and put our quality and technology to work for you. Come, join the Schaefer family! www.schaefercontainers.com
New Product Ad posted 12 months ago in Fermenters by Ripley Stainless Ltd.
Dimensions: 40” ID x 45” OD x 48” sidewall OAH 108” Nominal capacity plus 25%, ASME dished head, 1 ½” removable CIP c/w rotating sprayball plus 1 ½” tee, 4” dry hop, 60°cone angle, cooling jacket 35-40% sidewall coverage plus cone jacket-max 20 psi, (1) 9” thermowell, 1 ½” PRV, 2” insulation and cladding, R-12 value (cone & sidewall only), side oval manway, K33 sample valve, 1 ½” J-pipe drain, 1 ½” racking, 4 stainless legs, c/w adjustable feet. Maximum tank pressure 14.9 psi, all 304 2B stainless steel OD mig welds and strip polished ID welds tig welded and heat stain removed
New Product Ad posted 12 months ago in Fermenters by Ripley Stainless Ltd.
Fermentation Tanks Dimensions: 52” ID x 57” OD x 96” sidewall OAH 169” Nominal capacity plus 25%, ASME dished head, 1 ½” removable CIP c/w rotating sprayball plus 1 ½” tee, 4” dry hop, 60˚ cone angle, cooling jacket 35-40% sidewall coverage plus cone jacket-max 20 psi, (1) 9” thermowells, 1 ½” PRV, 2” insulation and cladding, R-12 value (cone & sidewall only), side oval manway, K33 sample valve, 1 ½” J-pipe drain, 1 ½” racking, 4-5 stainless legs, c/w adjustable feet. Maximum tank pressure 14.9 psi, all 304 2B stainless steel OD mig welds and strip polished, ID welds tig welded and heat stain removed Qty : 2
New Product Ad posted 12 months ago in Brite and Storage Tanks by Schaefer Container Systems North America Inc.
Available from Schaefer Container, a highly adaptable, portable, tank, Manufactured by Schaefer Container Systems. Perfect for incremental volume and small breweries! Useful for virtually any purpose after the boiling kettle: Fermenter, Storage, Serving Tank, Infusion, Bright......the list goes on. Infinitely adaptable via the 2 @ 1-1/2 Tri Clamp (TC) ports over the front legs, 3" TC port on the top manway and 2" TC on the bottom drain-out butterfly valve. Each unit comes set up standard with a 14.5 PSI (1 BAR) pressure relief valve and a CO2 gas inlet. Available from immediate stock in 4 (500L), 6 (800L), 8 (1000L) and 10 (1250L) BBL sizes, either jacketed or non-jacketed. Each unit can be stacked 3 high, if empty, 2 high, if full. Imagine 20 BBL of beer in less than 16 square feet of floor space! Contact Schaefer today, to take advantage of manufacturer direct pricing on high quality...
New Product Ad posted 12 months ago in Fermenters by Ripley Stainless Ltd.
Dimensions: 48” ID x 53” OD x 72” sidewall OAH 141” Nominal capacity plus 25%, ASME dished head, 1 ½” removable CIP c/w rotating sprayball plus 1 ½” tee, 4” dry hop, 60°cone angle, cooling jacket 35-40% sidewall coverage plus cone jacket-max 20 psi, (1) 9” thermowell, 1 ½” PRV, 2” insulation and cladding, R-12 value (cone & sidewall only), side oval manway, K33 sample valve, 1 ½” J-pipe drain, 1 ½” racking, 4 stainless legs, c/w adjustable feet. Maximum tank pressure 14.9 psi, all 304 2B stainless steel OD mig welds and strip polished ID welds tig welded and heat stain removed
New Product Ad posted 12 months ago in Brewhouse or Brewing Systems by Ripley Stainless Ltd.
2 vessel electric all 304 stainless steel #4 OD finish Dimensions BK : 36" ID x 48" sidewall- half hinge lid, rotating sprayball and 4" TC (2) elements and 1 thermowell Dimensions LT: 36" ID x 42" sidewall- half hinge lid, rotating sprayball and ( 2) wedge wire screens and 13" x 17" clean out manway Stainless steel skid mounted 36" wide x 108" long Single stage heat exchanger 1- 1 1.2" HP pump (7) 1 1/2" BTFY valves 1- 1 1/2" sight glass Control panel included but need to be hooked up Emergency stop on/off for 2 elements pump on/off and VFD
New Product Ad posted 12 months ago in Nano Brewing Equipment by Schaefer Container Systems North America Inc.
Available from Schaefer Container, a highly adaptable, portable, tank, Manufactured by Schaefer Container Systems. Perfect for incremental volume and small breweries! Useful for virtually any purpose after the boiling kettle: Fermenter, Storage, Serving Tank, Infusion, Bright......the list goes on. Infinitely adaptable via the 2 @ 1-1/2 Tri Clamp (TC) ports over the front legs, 3" TC port on the top manway and 2" TC on the bottom drain-out butterfly valve. Each unit comes set up standard with a 14.5 PSI (1 BAR) pressure relief valve and a CO2 gas inlet. Available from immediate stock in 4 (500L), 6 (800L), 8 (1000L) and 10 (1250L) BBL sizes, either jacketed or non-jacketed. Each unit can be stacked 3 high, if empty, 2 high, if full. Imagine 20 BBL of beer in less than 16 square feet of floor space! Contact Schaefer today, to take advantage of manufacturer direct pricing on high quality...
New Product Ad posted 12 months ago in Fermenters by Ripley Stainless Ltd.
Dimensions: 52” ID x 57” OD x 96” sidewall OAH 169” Nominal capacity plus 25%, ASME dished head, 1 ½” removable CIP c/w rotating sprayball plus 1 ½” tee, 4” dry hop, 60°cone angle, cooling jacket 35-40% sidewall coverage plus cone jacket-max 20 psi, (1) 9” thermowell, 1 ½” PRV, 2” insulation and cladding, R-12 value (cone & sidewall only), side oval manway, K33 sample valve, 1 ½” J-pipe drain, 1 ½” racking, 4 stainless legs, c/w adjustable feet. Maximum tank pressure 14.9 psi, all 304 2B stainless steel OD mig welds and strip polished ID welds tig welded and heat stain removed