Used Product Ad posted 2 weeks ago in Fermenters by Andrew Silvent
3BBL Stout Tanks fermenter with cooling coil. Can be hooked to glycol or cold crashed in walk in. Only selling because we installed a new 7bbl in its place. Great shape and well taken care of. Willing to ship or deliver within 50 miles of 14527.
Used Product Ad posted 2 weeks ago in Other Cooling and Heating Equipment by Steve Ruby
For sale is a used Thermaline T13CH Heat Exchanger. Manufactured in 2001, it was designed to be used in conjunction with a 20bbl brewing system. It has been unused for some time, but can be completely deconstructed for cleaning or parts replacement. Some TC ports were damaged/scraped in the move, but can be replaced. Purchased as part of a lot and never had a use for it. New is approximately $4800, asking $1500 OBO. Located in Indianapolis, IN. Will require a liftgate to ship. We will get it on a pallet and wrap it, but buyer coordinates and pays for all shipping and other packaging costs.
Used Product Ad posted 2 weeks ago in Kitchen Equipment by Steve Ruby
For sale are two Beverage Air Single Clear Door Merchandise Coolers. Both are in working condition, verified coming down to temps between 36-38 within approximately one hour. Only have the shelves for one, I am not sure where the other set disappeared to. Both have some slight comestic damage to the sides/bottom. The one with shelves has a bend at the bottom and the one without shelves has some tape residue, scratching on the side, and a chip in the name. These are exclusively cosmetic, both seal and hold temp just fine. I can't upload a video taken on my phone here, but can provide the video of each working. These retail approximately $2400 new. Asking $1500 for the one with shelves and $1000 for the one without. If you want both, $2250 will get you both. Located in Indianapolis, IN. We will pallet wrap them and put them on...
Used Product Ad posted 2 weeks ago in Miscellaneous Equipment by Thorin Peiser
50 lb capacity. Used once then cleaned and stored dry. Still has tape on the wheels from when originally shipped. Too big for our operation. Located in Austin, TX. From CPE website: (https://www.cpesystems.com/products/mh-20-hop-induction-system) “The MH-20 Hop Induction System (HIS) greatly increases the ease and safety of the dry hopping process. Attached to select centrifugal or shear pumps, the MH-20 HIS hygienically suctions hops into your beer with minimal oxygen introduction. This completely eliminates the need for scissor lifts or shaky ladders, decreasing workload and greatly increasing safety. With the MH-20 HIS just load your hops, start your pump, turn the valve, and within minutes your hops are in the tank. We have added a pneumatic vibrator to the hopper to improve the flow of the hops and to help prevent bridging and clogs. We've custom designed the MH-20 based on feedback from our local breweries: Light and easy to move...
Used Product Ad posted 2 weeks ago in Canning Equipment by David Bronstein
This line has been a workhorse. We purchased it used in 2017 and have used it reliably since, running 30+cans per minute/300+cases per day 5 days per week. Regular maintenance and a few upgrades have kept it consistent, nice seams, good fill levels, DOs in the 30-60ppb range. Decommissioned November 2023. Depal and Labeler included. Many spare parts including backup PLC. Price is negotiable. Rigging included! I can also include a line that was used to fill 1-gallon water bottles. It has many of the same parts and can be used for spare parts including a labeler for a great price! Contact with any questions. Make an offer!
Used Product Ad posted 2 weeks ago in Nano Brewing Equipment by Chris Kaplan-Walbrecht
SPEIDEL FERMENTERS: 1 BARREL SIZE 3 avilable, great like-new condition, $100 each. Can deliver in NYC/Long Island/NJ area for addl charge
Used Product Ad posted 2 weeks ago in Kegs and Kegging Supplies by Chris Kaplan-Walbrecht
5 gallon corny kegs: up to 150 pieces. Clean stainless steel and good gaskets. Corny kegs have 2 valves on the top of them that allows for beer and gas to pass-through. The beer flows via a spear in the valve that runs to the bottom of the corny keg. Standard keg in the US. NEW: $150 each. THESE: $60 each or volume discount for lots of 10 for $450. can deliver on Long Island, NYC or NJ for additonal charge
Used Product Ad posted 2 weeks ago in Nano Brewing Equipment by Chris Kaplan-Walbrecht
TOTAL BREW STARTER PACKAGE: FOR THE HOMEBREWER INCLUDES everything you need to grind grain, mashing, boiling, chilling, and fermenting, and kegging up your beer. 15 GALLON BREW SYSTEM grain grinder hot liquor pot mash pot Pump coil chiller beer filter 30 gallon fermenter and 4 kegs. PRICE: $650
Used Product Ad posted 2 weeks ago in Kegs and Kegging Supplies by Chris Kaplan-Walbrecht
KEGS: 1/2 Barrel Ball Valve NDL Kegs. Excellent condition, 18 available, $100 each. Clean, great working condition. can deliver around NE USA for additional fee.
Used Product Ad posted 2 weeks ago in Nano Brewing Equipment by Chris Kaplan-Walbrecht
Check it out: https://brewhaequipment.com/pages/biac-specifications Easy to use, easy to move, on heavy duty caster wheels.Comes with pump, 200 lb grain mash colander, and has water jacket to cool wort to fermentation temperature . Also comes with chiller to allow for making lager beers or chilling beer right to tap. System allows for all in one brewing from mash, boil, ferment and serve without transferring! Only a few years old, lightly used, in great commercial condition. Small footprint, includes everything you need within this one system, perfect for taproom or microbrewery. NEW: $24,000
Used Product Ad posted 2 weeks ago in Brite and Storage Tanks by Benjamin Mills
60 bbl NSI Brite tank. Has been properly maintained and includes fittings. This tank is ready to ship. I can help with loading onto a truck. Shipped to us standing up. Call or e-mail Ben at ben@fossilcovebrewing.com or 479*644*4601
Used Product Ad posted 2 weeks ago in Brite and Storage Tanks by Benjamin Mills
$2000 per tank Selling 5, 5 bbl Specific Mechanical Single wall Brite tanks. I bought these for a project but decided not to use them. Call or e-mail Ben at ben@fossilcovebrewing.com or 479*644*4601.