Nano Brewing Equipment

Used Product Ad posted 1 day ago in Nano Brewing Equipment by aaron heldreth

Vessel is in great shape. Bought it a while ago, but never put it into service. Contact me with any questions. $ 1,500 Vessel located in Barstow Ca 92311 The Vessel comes with a two piece false bottom as well as a CIP ball mounted on top of the lid for easy cleaning. There are two ports for the vessel one on the bottom exiting on the right hand side, and one about a foot above the bottom also on the right hand side. The vessels is 66" Tall and 30" around. The man door opening is approx 6" x 24" . Please let me know if you have any additional questions.

Used Product Ad posted 1 day ago in Nano Brewing Equipment by aaron heldreth

There are a total of 4 vessels in the system There are (2) 2BBL Jacketed Fermenter $1,500 Each  ************** SOLD ************************ (1) 2 BBL Boil Kettle (Electric)  $2,000 (1) 2BBl Mash Tun   $2,000 Please Contact me if you have any questions $3,500 if you get both the mash tun and the boil kettle System currently located in Barstow California 92311

Used Product Ad posted 4 days ago in Nano Brewing Equipment by Cara Naeger

Three-vessel Blichmann BoilMaker Brewhouse, Accessory hosing and plumbing from kettle-to-kettle and Therminator heat exchanger Inline oxygenation assembly Ss Brewtech 3/8 HP glycol chilling unit Associated Plumbing and insulation for glycol unit to fermenters (x3) Ss Brewtech jacketed Uni-tanks with included accessories (carbonation stone, sampling valve, pressure gauge) (x3) FTSs glycol controllers and mounts $10,000 OBO, price does not include freight or packaging

Used Product Ad posted 6 days ago in Nano Brewing Equipment by Tommy Eriksson

3bbl Electric Kettle insulated comes with manual control panel valves and hoses. $2500.00 O.B.O

Used Product Ad posted 6 days ago in Nano Brewing Equipment by bix

https://www.blichmannengineering.com/1-bbl-electric-herms-pilot-system.html  This but with different controllers than what is pictured here and kettle extensions in order to make it a 2 bbl system. It is also oriented the reverse from what is pictured so the workflow is from right to left, HLT-->Mash Tun-->Boil Kettle.  See attached photos. Note that this isn't the model with a mash tun manway. This system was our only brewhouse for 4 years. It worked great for brewing in a space with an extremely small footprint. We have used it for that many years which means some of the components have been broken or worn out and replaced with Blichmann products, other aspects have been slightly altered to work with our brewing methods. The main difference is that the main pump is now Chugger brand, the plastic grips on the handles have all broken off, and the mechanism for separating the bottom kettles from the extensions...

Used Product Ad posted 7 days ago in Nano Brewing Equipment by Victor Jones

We have (3) 2 BBL Conical fermenters that have hardly been used. They are currently ready to deliver or ship and are on pallets Asking $2700 each OBO or $7500 for all three These were only used 2016-2018-ish when brewery closed and have been stored indoors since. We are also selling some of our other tanks too (2) Like new 2020 Craftmaster Stainless 3.5 BBL Bite tanks only used 3 or so times. (1) 60 BBL Brite (2) Glacier 40 BBL Fermenter Unitanks Also many 1/6 BBL kegs available cheap.

Used Product Ad posted 1 week ago in Nano Brewing Equipment by Charles MacLean

1 Mash Tun 304 stainless steel with welded. stainless cladding over 2" insulation Laser cut stainless steel slotted false bottom Hydrator for mashing Sprayball for sparging and CIP 1 Stainless steel grant 1 Gould punp for liquor ! Solid copper brewkettle with whirlpool 160 litres to top of straight side 1 90000 BTU burner (choice of propane or natural gas) 1 Switch Station with stainless piping, butterfly valves and jumpers 1 Triclover 1 1/2 HP centrifugal pump 2 Stainless steel hot liquor tanks 100 litre capacity each 2 90000 BTU burners (choice of  propane or natural gas) 2 plate heat exchangers

Used Product Ad posted 1 week ago in Nano Brewing Equipment by Ant Lavia

Three bubba's barrels at 100gal each.  mash tun with false bottom and manway, kettle, and WP vessel.  knocks out about 85-90gal of beer with a bit of antifoam.  or high gravity and dilute w/DO water.   a basic refletix wrap insulates the mash, loses only about 3F over an hour.  kettle currently setup for electric with 2x 7kw ripple elements.   comes with stand for MT/BK, two lids, cords for elements, heat exchanger   ships from 93638 w/forklift

Used Product Ad posted 1 week ago in Nano Brewing Equipment by Jamesdavid Ryan

2BBL Brewhouse Manufactured by Newlands Systems INC Combined Mash Tun & HLT 480V 3-Phase Heating Element Controller $8,000

Used Product Ad posted 1 week ago in Nano Brewing Equipment by Pete Avery

Used 2 Jacketed BBL Brite Tank. Purchased used 2 years ago, never used. In good shape.   Message for details.

Used Product Ad posted 1 week ago in Nano Brewing Equipment by Dave Lewis

This system was used for about 5 years and has been in storage for the last 4 years.  Buyer may have all my miscellaneous accessories as well (bottles, books, hydrometers, etc.)   Prefer pick up at Middle Tennessee location, but will consider shipping at buyers expense.

Used Product Ad posted 1 week ago in Nano Brewing Equipment by Chad Grieve

$10,000 OBO 4 vessel Nana Brewing system ($15,000 value) table 28″ tall, 20″ wide, 64″ wide 3 propane burners, 1 manual, 2 temperature controlled Doulble 30 gal BruGear  Mash Tuns 2 false bottom 2 sparge diffusion plate assemblies 55 gal Bilchman BoilMaker Boil Kettle whirlpool inlet assembly 30 gal BruGear hot liquor tank two, 1/2 chugger S.S. pumps  1 1/2″ tri clamp fittings Four Fermenters ($9,000 value) Bru Gear 1bbl SS 40 gal non Jacked two, 2 door commercial Refrigerators electronic temperature controlled 1 degree increments Bright/Keg/Serving vessel ($9,000 value) Ten, Sabco 1/2bbl Sanke Kegs 4″ Tri-Clamp lid removable spear 1/2″ removable Carb wand Psessure relief valve 304 SS 3 door commercial Refrigerators