Grain Storage and Handling Equipment

Reset - Viewing: Used Product Ads, Category Grain Storage and Handling Equipment

Used Product Ad posted 3 weeks ago in Grain Storage and Handling Equipment by Dustin Teague

Custom Fabricated Mill Roller Grinder for 1-5 BBL System. Hopper is large enough to hold (1)-55 gal. sack of grain. Wood Cabinet below for dust control and storage of milled grain. Can be attached to auger if needed. 1 HP motor. 110v. Comes with 3 sets of back up rollers so you can always have fresh re-knurled rollers to swap out. Rollers were fabricated by https://www.crankandstein.net/ Don Obenauer at crankandstein has been great for the past 7 years keeping our rollers sharp.

Used Product Ad posted 3 weeks ago in Grain Storage and Handling Equipment by Jason Bell

Sized for 15 BBL Brewhouse 15 BBL Grist Case fabricated by Alpha Brewing Ops. Designed for floor placement with mill mounted on top and auger mounted underneath. Great condition; no issues.

Used Product Ad posted 6 days ago in Grain Storage and Handling Equipment by Doug Gaumer

15bbl Grist case and Flex auger, motor, receiver.

Used Product Ad posted 2 months ago in Grain Storage and Handling Equipment by ABM Equipment

Pictures are too big for the site, go here to scroll the gallery (arrows are hard to see). Briefly-used grist case from the distilling industry with air flow-assist configuration. Free of defects with Ø11″ inlet, Ø6″ outlet, and Ø4″ dust port. Click here to view full drawings and dimensions. Go here for general information about our grist cases. Volume 450 Cubic Feet Capacities Liquid – 3,172 Gal | Grain – 11,436 lbs. Materials 304 Stainless with 2B outer finish and sanitary interior finish Dimensions 132 9/16″ H, 110 1/4″ W Weight 1,876 lbs. Made In USA Price $18,000

Used Product Ad posted 3 weeks ago in Grain Storage and Handling Equipment by Jason Bell

Sized for 7 BBL Brewhouse 7 BBL Grist Case fabricated by American Beer Equipment. Designed for floor placement with mill mounted on top and auger mount underneath. No issues with this piece of equipment; in great condition.

Used Product Ad posted 4 weeks ago in Grain Storage and Handling Equipment by William Sada

Alpha Grain Mill $4900 Alpha 2 Roller Grist Mill Dust Tight 6x6 Rollers 3000lb/Hr

Used Product Ad posted 1 week ago in Grain Storage and Handling Equipment by Heather Adams

We are based in Aurora, Colorado, and are selling our Alpha 2-Roller Grist Mill with switch controls. We brought a brewery and are converting it to a cidery, so we don’t need this equipment. Buyer pays shipping. Cheers! Alpha Mill – 2 roller grist mill Up to 3,200 lbs per hour, 5 hp motor – explosion proof motor, High yield extract efficiency saves on grain expense, Dust tight, 6 x 6 Dual rollers, Travel gauge for dialing rollers within 1/1000th of an inch, Heavy duty construction, Powder coated steel frame, Low profile in-feed hopper for ergonomic grain dumping, Large magnetic comb catches any metal fragments, switch controls

Used Product Ad posted 1 week ago in Grain Storage and Handling Equipment by Douglas Adams

We are based in Aurora, Colorado, and are selling our 2-Roller Alpha Grain Mill with switch controls. We brought a brewery and are converting it to a cidery, so we don't need this equipment. If interested, please leave me your email information, and I will contact you with further details. Buyer Pays Shipping. Cheers!

Used Product Ad posted 4 weeks ago in Grain Storage and Handling Equipment by Pugs13

Barely Used Portland Kettle Works Maltmaster Mill - 7bbl - 15bbl Adjust the crush of your grain on the fly. LIKE NEW & Small footprint. Auger motor is a 3 phase - 3/4hp unit. The augur comes with PVC piping that is set up for roughly 15ft at 45 degrees from mill and then runs straight for an additional 30ft to our mash tun, so overall the auger is roughly 45ft of line.  Again, all this comes with the purchase.  Brand new this was $17,000.  I am looking to get $14,200 OBO. Looking to downsize and needs to go!  Buyer must line up shipper and pay all shipping costs.

Used Product Ad posted 3 weeks ago in Grain Storage and Handling Equipment by Jason Hansen

Engl 2 roller mill in good condition. This will be available mid-summer 2024. Local pickup, or buyer arranges shipping.

Used Product Ad posted 3 days ago in Grain Storage and Handling Equipment by Kyle Wilson

We are selling our two FormPak super sac/bulk bag malt loading stations. These are equipped with isolating valves for safe bag openning and electric bag hoist for easy staging and loading. Rigging and shipping costs are buyers responsibility. Brooklyn Brewery will assist in coordinating with our local rigging contractor. Please email Kyle (kwilson@brooklynbrewery.com) for additional information or to make an offer. Thanks for your interest!

Used Product Ad posted 2 days ago in Grain Storage and Handling Equipment by Eric Underwood

Used Malt Mill.  This Mill works as it should.  We replaced it with a larger mill a couple of weeks ago and no longer have a use for it.  Price reduced for quick sale!

To top