Grain Storage and Handling Equipment

Reset - Viewing: Category Grain Storage and Handling Equipment

Used Product Ad posted 2 weeks ago in Grain Storage and Handling Equipment by Dustin Teague

Custom Fabricated Mill Roller Grinder for 1-5 BBL System. Hopper is large enough to hold (1)-55 gal. sack of grain. Wood Cabinet below for dust control and storage of milled grain. Can be attached to auger if needed. 1 HP motor. 110v. Comes with 3 sets of back up rollers so you can always have fresh re-knurled rollers to swap out. Rollers were fabricated by https://www.crankandstein.net/ Don Obenauer at crankandstein has been great for the past 7 years keeping our rollers sharp.

Used Product Ad posted 4 weeks ago in Grain Storage and Handling Equipment by Doug Gaumer

15bbl Grist case and Flex auger, motor, receiver.

Used Product Ad posted 1 week ago in Grain Storage and Handling Equipment by Stoney Head

2 Roll grain mill for sale, side by side 14" rollers, hopper on top, grain shoot on bottom, adjustable crush size, access panels for easy cleaning, must have 208/230V 3 phase power supply, 26A.  We purchased this brand new in 2013 and it has been a workhorse for our brewery.  Currently set up for plug in to run but can easily be converted to a wall switch.  New drive belts replaced 2019.  Comes with back up belts.  Weighs roughly a ton (2000 lbs). WE ARE MOTIVATED TO SELL. MAKE US A RESONABLE OFFER! You pay shipping from Reno, Nevada (89511)

New Product Ad posted 12 months ago in Grain Storage and Handling Equipment by Marks Design and Metalworks

A slide gate for manually releasing or stopping the flow of grist into the mash tun from a grist case.  Offered in 3", 4", and 8".

New Product Ad posted 12 months ago in Grain Storage and Handling Equipment by Marks Design and Metalworks

A slide gate for manually releasing or stopping the flow of grist into the mash tun from a grist case. Offered in 3″, 4″, and 8″.

Used Product Ad posted 2 months ago in Grain Storage and Handling Equipment by ABM Equipment

Pictures are too big for the site, go here to scroll the gallery (arrows are hard to see). Briefly-used grist case from the distilling industry with air flow-assist configuration. Free of defects with Ø11″ inlet, Ø6″ outlet, and Ø4″ dust port. Click here to view full drawings and dimensions. Go here for general information about our grist cases. Volume 450 Cubic Feet Capacities Liquid – 3,172 Gal | Grain – 11,436 lbs. Materials 304 Stainless with 2B outer finish and sanitary interior finish Dimensions 132 9/16″ H, 110 1/4″ W Weight 1,876 lbs. Made In USA Price $18,000

New Product Ad posted 12 months ago in Grain Storage and Handling Equipment by Marks Design and Metalworks

A slide gate for manually releasing or stopping the flow of grist into the mash tun from a grist case. Offered in 3", 4", and 8".

Used Product Ad posted 2 weeks ago in Grain Storage and Handling Equipment by Jason Hansen

Engl 2 roller mill in good condition. This will be available mid-summer 2024. Local pickup, or buyer arranges shipping.

Used Product Ad posted 2 weeks ago in Grain Storage and Handling Equipment by Adam Rhodes

A pair of leak-proof dump hoppers. Easy to grain out and then dump into waiting farmer truck. With a pair you can store grain for a period before dumping. One is pretty new, one is pretty old but still super functional. Triggers and safeties work on both units. $500 for the pair

Used Product Ad posted 3 weeks ago in Grain Storage and Handling Equipment by Kyle Wilson

We are selling our two FormPak super sac/bulk bag malt loading stations. These are equipped with isolating valves for safe bag openning and electric bag hoist for easy staging and loading. Rigging and shipping costs are buyers responsibility. Brooklyn Brewery will assist in coordinating with our local rigging contractor. Please email Kyle (kwilson@brooklynbrewery.com) for additional information or to make an offer. Thanks for your interest!

Used Product Ad posted 3 weeks ago in Grain Storage and Handling Equipment by Eric Underwood

Used Malt Mill.  This Mill works as it should.  We replaced it with a larger mill a couple of weeks ago and no longer have a use for it.  Price reduced for quick sale!

Used Product Ad posted 4 days ago in Grain Storage and Handling Equipment by Matt Marple

20lb per minute milling.  Explosion proof Moter on rolling cabinet.  Rollers are barely used and replaced right before it was decommissioned.  50lb steel hopper, has a small channel cut into it where we installed a grain shoot.   $3,000 Buyer is responsible for all packaging and shipping costs from Eagle, CO

To top