Used Product Ad posted 15 hours ago in Cans and Canning Supplies by Rob Phillips
We have a surplus of these Bread Baskets or Trays. We used them to warehouse cans prior to stuffing them in 12-packs. They work perfect to hold 104, 12 oz cans, and stack up for storage on a pallet. We have about 70 or so - willing to sell all or part. Dimensions are 26" x 29" (Inside 24.5"x28") The same as these: https://www.milkcratesdirect.com/heavy-duty-bread-trays/bread-tray Buyer responsible for shipping from 84115. I am not sure the best way to ship these, maybe on a pallet stacked up and strapped down? We can shrink wrap them too. Asking $5 each.
Used Product Ad posted 15 hours ago in Keg Washers by Rob Phillips
This is a wild machine – made in China, but it works and does a good job. We used it for the past 7 years, and it was a workhorse for us. We do have a user manual that is in English. Currently it is throwing a breaker on the rinse cycle, and we have narrowed it down to something in the pump. We cannot take more time to chase it down as we have already replaced it with a newer model. If you are a sharp sparky, this will be an easy repair. Comes with two pumps, heater, reservoirs. Has to hook up to hot water. We rigged it to sanitize the kegs as well. Cleans 1/6 bbls and ½ bbl Sankey topped kegs. Hooks up to air for purge, and CO2 for finish pressure. Does seem to leak pressure if the kegs are left sitting on top of...
Used Product Ad posted 3 weeks ago in Brewhouse or Brewing Systems by Rob Phillips
15 bbl Steam Fired 2 vessel brewhouse for sale This has been an absolute workhorse for us. This is an older DME system, including Mash Tun, steam fired Kettle, grant, pumps, HX and controls. Pumps are currently wired for 230/3ph power. This is a very reliable, but manual system, if you want it to flow or stop flowing, you are turning a valve. We have used this for 7 years, and put out about 2,000 bbls per year on it. Mash tun includes grist hydrator, plates, grant, pump, vorlauf piping, and all you need to make wort. Kettle is steam jacketed, bottom, side low, side high (3 jackets). Kettle includes valves and piping for HX arrangement, however we are selling with a different Heat Exchanger than we have been using for 7 years, so some re-piping will likely be needed. The Heat Ex that we are selling this with...