Used Product Ad posted 4 weeks ago in Canning Equipment by Colin DOrge
We are selling our PakTech CCA120 applicator, manufacturer specs: https://paktech-opi.com/applicators/cca120-180/ We're the second owners, it's well maintained and runs well. We're selling it because it doesn't accommodate the height of 19.2oz cans.
Used Product Ad posted 4 weeks ago in Brite and Storage Tanks by Brian Graves
We are selling 4 of our non-jacketed 5 barrel brite/serving tanks. These tanks went into service in June 2022 and have barely been used with less than 10 batches in each. All are clean and ready to go. Selling due to limited space and a change in how we are storing/serving our beer from the taproom's cold room. They are rated for 14.9 psi and currently outfitted with all necessary peripherals and ready to use, including CIP arm and spray ball, sight tube, carbonation stone, sample fitting, pressure gauge, pressure/suction relief valves, etc. $2,900 each or all 4 for $10,000. Purchased new from Forgeworks. Price is for tanks and peripherals only. You will need to arrange and pay for loading, crating, and shipping. Located 1.5 hours in Central IL, 1.5 hours south of Chicago, 3 hours north of St. Louis, and 3 hours west of Indianapolis.
Used Product Ad posted 4 weeks ago in Distillation Equipment by Parker Sturm
Hoga Alembic Pot Still. 250 gallon steam coil heated without agitation. These stills have been amazing to use for the startup phase of our distillery, but we are out growing them and need to make room for a larger system. You can add agitation for grain-on mashes.
Used Product Ad posted 4 weeks ago in Fermenters by Daren Orr
TWO 10 hl (12.5 hl gross) STAINLESS OPEN FERMENTATION TANKS: Asking $4,000 for both tanks ($2,000 each) - Dimple jacketed and 1" dense foam insulation (does not melt at boiling temps), 3 adjustable legs - DIN fittings on bottom valve and jacket in/out - ID = 54.25", OD = 58.25" - Inner height = 31" - 33.75" (sloped bottom), Outer height = 33.75", Total height (w/ legs) = ~42" - Said to be German made but there are no markings on the tanks
Used Product Ad posted 4 weeks ago in Canning Equipment by Nobl Cold Brew
NOTE: Looking to sell the package as complete as it is in production-ready condition. However, interested parties for parts of the system can be added to the waiting list. Turn-Key 100CPM Packaging Line – Depal, Filler/Seamer, Tunnel Pasteurizer, Labeling, Tanks and more We have just finished the commissioning of a faster line, and it’s time to let our previous packaging line go. We would keep it if we had the space! This is a co-packing dream setup or an exceptional line for a brewery, especially one with multiple can sizes. We routinely ran 5,000+ cases (12-packs) per day on this setup. This is effectively everything you could need to add 6-10M cans per year of output to your facility or start a new contract packaging company from scratch. Total value purchased new is well north of $1M! We are listing on Probrewer before it moves on to different avenues as...
Used Product Ad posted 4 weeks ago in Canning Equipment by Bryan O'Neal
I have a contract trade agreement a 2018 model Microcanner MC1000 with rinse station, accumulation table, kick off unit for label applicator, and ELF 50 stand. My Brewery is farm based with many other revenues of income and distribution is not profitable in our area. I am interested in purchasing a sawmill, so I am considering selling this canning line. The canning line is still in Chicago and I need to pick it up or have it shipped next week. They received my canning line on Monday, and they decommissioned the trade on Tuesday, March 26, 2024. Before shipping this can line to my location, I would be willing to discuss a deal to have the canning line shipped directly to the new buyer. Contract cost was $68,825.00 paid in full on March 9, 2018. If interested, we can discuss depreciation values, and make a quick sale and avoid double...
Used Product Ad posted 4 weeks ago in Kegs and Kegging Supplies by Allen Williams
60 Corny Keg's available for sale. Converting our fleet to Sanke. All kegs are cleaned, sanitized and holding pressure. All new gaskets and seals. Will be stacked and wrapped . $35 per keg, you pay shipping from Mountain Grove, MO.
Used Product Ad posted 4 weeks ago in Fermenters by Patrick Pennington
I am selling 3 of these Alpha 20 BBL Jacketed Fermenter Unitanks. The tanks are 128" tall and 65" wide. They have a side manway. All PRV, CIP, piping, butterfly valves, and clamps are included. These are top of the line tanks and like new! The tanks are ready to ship. I have a forklift for loading. The tanks are located in Frankfort, IN, It’s about 45 minutes north of Indianapolis. I will consider delivery for an additional fee. Email me at pat@backstepbrewing.com for questions of to be sent a copy of the drawing.
Used Product Ad posted 1 month ago in Brewhouse or Brewing Systems by Jackson Borgardt
2020 QTS 3 vessel 20bbl fully automated brewhouse with a 60bbl CLT and HLT. spent grain auger with automated knife gate. Strike water temperature is fully automated by blending CLT and HLT water to hit set point. CIP is done automatically as long as chemical is dosed in the man way. Remote capability and can be operated with a tablet on an app. Automation is done by Stone technologies. Brewhouse designed to be able to run as traditional 3 vessel or you can leap frog between both kettles depending on preference and brew day. Also designed for long boil stouts allowing to still brew on other kettle or kettle sours can be knocked out from kettle 1 into kettle 2 and cooled through heat exchanger to be able to pitch lactobacillus. Please reach out for any additional information. Brewhouse includes 20bbl mash mixer/lauter tun Automated wort grant Automated strike temp...
Used Product Ad posted 1 month ago in Fermenters by Ryan Roberts
150 gallon dimple jacketed open top 316SS tank - was originally manufactured for a local peanut processing facility working on a patent, patent fell through and they liquidated so we bought this to use for experimental open-top fermentation. Tank has never been used. Has welded angle iron near the bottom to hold a false bottom if one was made. Upgraded to 10bbl system and no longer plan to use 3bbl Single wall brite - Used since June 2019 originally for carbing in the walk-in. Chicago Brew Supply manufacture. On casters. Since getting glycol and jacketed brites we use it as a chemical reservoir from tank to tank CIP. Comes with all fittings pictured 30bbl jacketed ferm - Tank is loaded and ready for delivery. We purchased back in 2017 at auction and have had it on the side of our building in hopes to grow into it, but we wound...
Used Product Ad posted 1 month ago in Canning Equipment by James Partridge
Hello all, I have some brewery equipment up for sale on the North shore of Long Island. More photos will be posted once this site allows it. In the meantime, photos available upon request. The equipment is as follows: Cask Global Canning Solutions Canner MCS-V2 $14k. 10bbl Unitank no valves or carb stone $4250. Variable speed CPE brand CIP Pumps and carts. 2 available. $1250 each. 3HP ProChillerSystems Glycol chiller $6k. Pallet Jack $250. Please feel free to reach Jamie at Partyatthej@gmail.com in regards to any further questions, information or pictures of equipment. Buyers are responsible for pickup or shipping. Thank you.
Used Product Ad posted 1 month ago in Brewhouse or Brewing Systems by Mathew Pickering
3.5 BBL electric brew house with Mashtun, Kettle and 7BBL HLT. Plate heat exchanger built in along with both pumps for transfer and HLT. Brew house has wort aerator installed and all needed stainless pipes custom built. Also comes with control panel. 4 of the temp controllers need to be replaced (about $80 each to replace). Custom built with large head space to brew high gravity beer. Single phase 60hz. Also have one back up heating element included. Buyer responsible for rigging and shipping.