ROYALE BREWING - ONLINE ONLY AUCTION BREWERY & TASTING ROOM EQUIPMENT START DATE: 11:00 AM | TUESDAY - OCTOBER 15 END DATE: 11:00 AM | TUESDAY - OCTOBER 22 PREVIEW 8:00 AM TO 4:00 PM | MONDAY, OCTOBER 21 LOCATION: 55 NE FARRAGUT ST., PORTLAND, OR 97211 FOR MORE INFORMATION GO TO MURPHYAUCTION.COM AUCTION TO INCLUDE LATE MODEL BREWING EQUIPMENT: *2014 PRACTICAL FUSION 15-BARREL, 3-VESSEL BREWHOUSE WITH MASH/LAUTER TUN, 5 HP VSD AGITATOR, 15-BARREL GAS FIRED KETTLE/WHIRLPOOL, 30-BARREL HOT LIQUOR TANK, PUMP, 2015 THERMALINE 15185-CS-71 HEAT EXCHANGER, WATER FILLER, (2) RINNAI C199 INLINE WATER HEATERS, OPEN TOP GRANT, JENS EDWARDS CONTROL PANEL, CATWALK, PIPING, CONTROLS, MANIFOLD & HOSES *(4)BLACKSTONE 30-BARREL S/S JACKETED FERMENTATION TANKS *30-BARREL S/S JACKETED FERMENTATION TANK *INTERIOR STAINLESS 30-BARREL S/S JACKETED FERMENTATION TANK *MCF 30-BARREL S/S JACKETED FERMENTATION TANK *MCF 20-BARREL S/S JACKETED FERMENTATION TANK *PRACTICAL FUSION 30-BARREL S/S JACKETED BRITE TANK *JENS EDWARDS ELECTRIC 12-STATION CONTROL...
For sale are (3) 60 bbl cylindro-conical fermenters from Premier Stainless for $19,000 each. All have been in consistent use for the last 2 years and have zero issues. These tanks have 3 temperature probes, one in the cone and 2 at different heights in the upper jacket. Glycol jackets are in the cone and in the upper walls. All fittings are 1.5" TC: bottom port, racking arm (2.5" DIN connection to tank), CIP arm, blow off arm, sample Perlick port at bottom of upper jacket. Threads for pressure gauge and CO2 quick connect on CIP arm. 2 Adjustable PRVs, one on top of the tank and one attaches to blow off arm. 6” dry hopping port. See photos and cut sheet (dimensions in mm) in this ad. Email firstname.lastname@example.org for more details.
For sale are (4) 60 bbl cylindro-conical fermenters from AAA Metal Fabrication for $19,000 each. All have been in consistent use and have zero issues.
kind of a long story but the short version is we purchased this tank to use with our 1 bbl before using we moved locations and purchased a 3 bbl system and no longer need our 1 bbl stuff. This tank has never been used, and is still bolted to the original shipping pallet. insulted, glycol jacket. Will need to outfit tank with all the bits and parts
7 BBL Uni-Tank Fermenter - $6,500 Manufacturer: DaeuTech 1 Uni-tank 7 bbl Fermenters (picture shows 2 - we are selling 1) Carb Stone Sample Ports Racking Arm Top Mounted Manway Jacketed
Recently pulled out of production to make room for a 20 BBL . This is a great vintage workhorse Fermenter. Built like a submarine and is even certified to 25 PSI! Single glycol channel jacket cools the vessel perfectly. It has a shadowed manway and the manway extra gaskets are available through jet gasket. Comes with an extra gasket and current gasket is in great shape. Also comes with 2 racking arms; the original plus a custom made arm that allows for better yield. Great tank made in the USA for half the cost of a new tank from anywhere else! Dimensions are roughly 50" across at feet (feet are proud of the tank) and about 9.5' tall. wight approximately 1800 lbs. We prefer local pickup but we can tip it down and palatalize for an additional $500. Ready to ship and help you grow your brewery. See pics below...
(2) 100 bbl Marks jacketed fermenters available immediately, racking arm included. 174" tall, 100" wide. Due to rapid expansion we have decided to part ways with these. They are in perfect working order and have only seen about 6 turns each. Cut list is available on request.
1000L / 7 BBL jacketed sloped bottom wine tank with top and side manways. Triclamp fittings for drain, racking port and cip. Built-in PRV, sample port and sight level gauge. Beautiful Italian construction with mirror finish. Works well for beer with low transfer volume loss. Approximately 77" tall and 40" in diameter. Buyer arranges shipping or pick up from southern New Jersey.
We are selling this fermenter to make room for a 20bbl. It is in like-new condition and has been in use less than a year. dimensions are 3'10" x 9'10". Tank is ready to go now and has been recently passivated. Local pickup is preferred, but we can cradle it and put it on a truck for you. Buyer pays all shipping costs.
10 bbl Fermenter from American Beer Equipment. Very good Condition. - Stainless steel (304) sanitary construction - 100% TIG welded and sanitary polished - Design pressure 15PSI, Test Pressure 30PSI (0.2MPa) - 4 heavy duty stainless steel legs with adjustable height and leveling footpads - Interior shell: 304 stainless steel, thickness 11 gauge (3mm) - Interior and exterior finish bright polish to 3A 240 grit, sanitary surface - 1.5" Tri-clamp sanitary fittings - Vacuum & pressure relief valve - Pressure gauge - Thermometer gauge - Sample valve - Lifting Lugs - Side shadowless man way door - CIP arm and spray ball 360° of coverage. - Dual zone cooling jacket with glycol inlet and outlet - Rotating racking port and discharge port with valve and fittings - Hop port - Thermo-well (RTD sensor not included
14 bbl JVNW (so I was told) jacketed conical fermentor.Cone is not jacketedAbout 10 foot tall, 5 foot diameter.All valves included, Controller is not.Spray ball and racking arm included,as is sample port.Email for a picture. Make an offer Original post: http://discussions.probrewer.com/showthread.php?t=70114
This Fermenter has a busted glycol jacket. It is not effecting the inside integrety of tank and can be repaired. we are running on a 7 barrel and hardly ever used the tank before we had accident. plant of pictures and i can answer any question you may have.
Bought from an Idaho brewery about 6 years ago and never started my own, now the tank is just taking up space in my garage. 15 BBL stainless and jacketed. Previous brewery had the interior welds redone. Jacket has a small dent from the last move.
15bbl and 12.5bbl stainless steel, horizontal beer tanks for sale We are selling two horizontal tanks as follows (previously used to age sour beer): Tank #1: 15bbl tank; Insulated but not glycol jacketed; It is a Sprinkman tank of unknown age. Only indication of volume is handwritten note on tape that says 15.5bbl capacity, and it was sold to us as a 15bbl tank. Approximate dimensions: OD=42", ID=38", Height from ground to highest point = 65", length= 90". Tank #2: 12.5bbl tank; Insulated but not glycol jacketed; It was made by Zero in MO. Only indication of volume is a handwritten note on tape that says 12.5bbl capacity, and it was sold to us as a 12.5bbl tank. Approximate dimensions: OD=42", ID=38", Height from ground to highest point 62", length = 84". Asking price is $1,300.00 each, as-is, FOB Normal, IL, but we will sell the pair for a total of $2,200. Buyer is responsible for freight, but we can crate,...
15 barrel (578 gallon total capacity) fermenter. Original owners and have been fermenting clean beer (mostly lagers) in it since 7/2017 (about 35 turns). We'll disconnect it and get it outside, buyer pays and arranges shipping. Comes with PRV, blow-off/CIP arm, spray ball, racking arm, 4" to 1.5" TC drain port flat reducer, 1.5" TC elbow, two 1.5" butterflies, and sample port (provide your own temp control assy). I can provide the manufacture's spec sheet.
15bbl JVNW Fermentors/Uni-Tanks Jacketed and Insulated Four Available Ready To Go Right Now ( $10,500.00 )Hot
4-15bbl JVNW fermentors. Jacketed and insulated with cone cooling. Will sell individually or all together. There is a 8-vessel cellar control panel available for purchase with these tanks as well.
We are selling our outdoor pilsner farm. We have been making great beer outside with these bad boys for over 3 years but it is time to go up in size. 2 x 5000L Fermentors (flat bottom) and 2 x 4800L Conditioning Tanks (former horizontal dairy tanks). We currently ferment for two weeks in the FV and then transfer to CT with finings for 2-4 more weeks conditioning allowing us to put another brew into the FV. Alternatively the two verticals could also be used as BBT. All tanks are jacketed and we have had no issue holding the desired temperature in summer or winter. As with all used tanks, they have their quirks but we can fill you in on those. We would rather sell these together and will price them significantly better as a package rather than split up. 2 FV available at the end of this week...
We have 2 conical fermenters made in 2012 by Ripley stainless in Summerland BC. We had used the tanks at our old location, and kept them thinking we might use them for something but since they are half the size of our new brew, they are not practical for us here. Time to sell them to someone who can use them. Their volume is 10 BBL with a generous 25% headspace. The diameter is approx 48” and height to top of cip/ blowoff tube is 100”. I believe the conical bottoms are 60 degrees. The tanks have 1/2" npt welded on thermowell for temp probe, cone and side cooling jackets with 1” npt fittings. I presently have ss elbows, tees and ball valves connected to insulated pex piping which can come with the tank. There is a 1” tc ferrule on the side for sample port and a...