Other Cooling and Heating Equipment

Used Product Ad posted 1 day ago in Other Cooling and Heating Equipment by Michael Partheymuller

I am selling my Kreyer Glycol Single Fan Unit (msrp $644.99) used for chillin walk in coolers. Included is a FermFlex Defrost Controller(msrp $1499.99) and Defrost Kit (msrp $404.99). The kit was purchased new from MoreBeer in October 2022. The unit is capable of cooling a 1750 sq.ft. room (1/3 ton cooling capacity) using your existing glycol chiller and includes a solenoid and connection cable for easy integration.  The fan unit requires a 220v electrical connection. It has been disconnected and is currently in storage. Happy to send pictures or answer any questions. Buy to pay shipping.

Used Product Ad posted 1 week ago in Other Cooling and Heating Equipment by David Holm

Stout Electric HLT Tank only with 2 butterfly valves and HERMS coil. HL290RHC-EL-INS (2569). 7 bbl / 290 Gal Insulated Hot Liquor Tank with thermowell, tangential inlet, raised stainless HERMS coil, sight glass, (4) electric element ports, (1) level sensor port, 1/2-in. NPT water inlet, upper overflow port. Clamps, gaskets, lid with 3“ TC port for CIP and/or venting. HERMS Coil: 3/4” OD x 75‘ long Tank: 41.5” diameter x 72”H

Used Product Ad posted 2 weeks ago in Other Cooling and Heating Equipment by Adam Shay

Meyer Case Packer.  Complete list of available equipment can be found on www.carolinaprocessequipment.com .

Used Product Ad posted 2 weeks ago in Other Cooling and Heating Equipment by Adam Shay

Hermis Pasteurizer, year 2017, S/N 17130.  Available in August.  Complete list of available equipment can be found at www.carolinaprocessequipment.com.

Used Product Ad posted 3 weeks ago in Other Cooling and Heating Equipment by Michael Killgore

30 bbl HLT – has steam calandria, might be closer to 1000 gallons. Needs a new custom door gasket fabricated. Has some scaling, we want it gone asap. $1000 obo plus asking that your rigger move one tank for us from Milwaukie to SE Portland before collecting this tank. 1. ALL of the equipment to move this tank without damaging the floor of a warehouse, lift onto a trailer, and haul the tank. 2. Ability to Legally haul a wide load. 3. Experience in rigging. 4. Proof of business’s liability insurance. you must remove from the warehouse and load it yourself with your own equipment.

Used Product Ad posted 20 hours ago in Other Cooling and Heating Equipment by Liam Wurtz

Great condition. Some marring of stainless on floor of the interior. Scaling up to 10 barrel HLT and looking to sell this one.   $6500 or best offer   Features 1.5” Tri-clamp Base port with butterfly valve 1.5” Tri-clamp inflow Side port Lid with 2” and 1.5” tri-clamp ports 2” side port for heating Element ¾” port and housing for temp probe Watlow BHN717N3W-40 Tubular Plug Heater: 2” 3 Element 240v 9kw   Other Information Easy hook-up to thermostat, electric No built in recirculation Approx. 12 hour heat up  

Used Product Ad posted 4 weeks ago in Other Cooling and Heating Equipment by Peter Skelton

Selling a Coolbot used to control a mini-split AC unit in our old walk-in. Works great, but no longer needed now the brewery is not in operation. Includes an extra temperature sensor and heater cable.

Used Product Ad posted 2 days ago in Other Cooling and Heating Equipment by Jason Goldstein

Ordered two Glycol to Air Evaporators for our new cold room but project changed during the 12 week lead time for production and now only need one.  Still in crate from manufacturer. MSA34A-0623BCM NEMA 4x Non-Fused Motor Disconnect Built to run on 480v for efficiency.  Available immediately, paid $6,000 for each but willing to sell one quickly for $4,500

Used Product Ad posted 3 weeks ago in Other Cooling and Heating Equipment by Adam Shay

Alfa Laval Heat Exchanger.  Model MO - MF MCS, 1997, S/N 301-04-75540.  All available equipment can be found at www.carolinaprocessequipment.com .

Used Product Ad posted 3 weeks ago in Other Cooling and Heating Equipment by Michael Killgore

Product description Our Kreuzmayr chamber pasteurizer units are designed to pasteurize products which have already been filled into bottles or cans. The KKP 960 chamber pasteurizer is heated through direct steam injection into the chamber, used to heat the product to the desired pasteurization temperature. Air circulation within the steam chamber is facilitated by a stainless steel air blower. The steam is injected, through a pneumatically activated steam valve, into an air channel for optimized steam mixing. There is a condensate drain on the bottom of the chamber, as condensate can not be recirculated in these systems. The thickness of the insulation is 40-100 mm in the chamber walls.

Used Product Ad posted 4 weeks ago in Other Cooling and Heating Equipment by chad phillips

2 stage heat-x in great condition. Always well maintained. By-pass loop for better whirlpool.

Used Product Ad posted 4 weeks ago in Other Cooling and Heating Equipment by Adam Shay

Uni-Pak Can Warmer, Model 624RH, S/N 87-4254.  Complete list of equipment can be found at www.carolinaprocessequipment.com .