Used Product Ad posted 3 weeks ago in Fermenters by Brad Lincoln
Selling our squat 30 BBL fermenter from Premier Stainless. Can fit in lower ceiling spaces.
Used Product Ad posted 3 weeks ago in Fermenters by dmollberg
8 bbl Ripley Stainless Unitanks-Quantity 2 -2 glycol zones, adjustable racking arm, blowoff arm, spray ball, carbonation stones, pressure vacuum relief and adjustable tank leveling pads. Both tanks have a 1 and 2 inch port on top. $5000 per tank Buyer responsible for shipping
Used Product Ad posted 3 weeks ago in Fermenters by Brandon Floyd
I have 5 Letina variable capacity jacketed fermenting tanks available. These have the floating lids which allows you to adjust the size of the tank to meet your needs. Mathmatically these will hold 256G (37" diameter, 55" tall) to the brim. However, I picked these up from a brewery in 2021 who was doing 7bbl batches in these. With everything going on we were just not able to get our brewery up and going. Only looking to get what I have in them. Hopefully someone starting up can make use of these. Features Tanks are on casters, Easy to move around I will include boxes of tri clover sanitary butterfly valves, ferrules, caps, elbows, fittings, and thermometers. Local pickup only and would prefer to see them go as a set.
Used Product Ad posted 4 weeks ago in Fermenters by Patrick Pennington
I am selling this Psycho Brew 15-BBL Capacity Stainless Steel Fermentation Tank It is Approx 48" Diameter x Straight 76", overall height is about 110" It has a Top Manway. The tank is currently located in Frankfort, IN which is about 45 minutes north of Indianapolis. I will consider delivery a reasonable distance. This tank was in service until the brewery shut down in summer of 2023.
Used Product Ad posted 4 weeks ago in Fermenters by Justin Catalana
We have 10x 80 BBL Conical Fermenters & 2x 80 BBL Brite Tanks that were made in 2016-2017, they are in great condition and have been well maintained. These tanks are insulated and jacketed. Email: justin@fortpointbeer.com Prices: $24,000 per fermenter $14,000 per fermenter $20,000 per brite tank $12,000 per brite tank Buyer pays for rigging and saddles, $2200 per tank, and freight ~$2000 for an FTL on the west coast which can fit three tanks. The tanks were made and purchased by Premier Stainless. Here are links to the exact spec sheets.
Used Product Ad posted 2 weeks ago in Fermenters by Jacob Wylie
I have 1 Allied beverage 7 barrel unitank jacketed for 6900 and a pacific brewing systems jacketed unitank 6500 or $12, 500 for both These are both in excellent condition, low use they have been in storage for 4.5 years, not cheap Chinese tanks, they retail now for 11k ,12k each location Clearwater Fl
Used Product Ad posted 3 weeks ago in Fermenters by James Mont
FOR SALE: $7000 USD each 2- 10BBL (12hL) Jacketed Fermenters (unitanks) complete with all valves, thermo probes, gauges, and fittings. These tanks have seen fewer than 24 brews each and are in EXCELLENT condition inside. These have a 6" dry hop port, the tank is also fitted with a Carb stone assembly, Tasting port, Thermometer via 1.5 " tri clamps, Front manway, CIP, and Blow off arms, Butterfly valve on bottom drain and racking arm included. We provide PT 100s for each tank to feed information to your temperature control. We can include pre-installed Johnson A421 temperature controller units for an additional charge of $400 per tank. These units ship standing up on a pallet and can easily be put into a truck and sent LTL. Buyer will assume the costs and logistics of shipping. The tanks are already wrapped and palletized, just waiting for an address and shipper.
Used Product Ad posted 5 months ago in Fermenters by ABS Commercial
We carry in-stock fermenters from 3 BBL-90 BBL, as well as specialize in custom fermentation tanks of any size. Customizable sizes up to 600 BBL Available as a Unitank Customizable dimensions built to your specifications Customizable horizontal or open top designs 316 Stainless Steel Upgraded accessory components ASME U Stamp pressure rating up to 10 BAR (145 PSI) CE Certification, where applicable Contact: sales@abs-commercial.com Request a Quote www.abs-commercial.com
Used Product Ad posted 2 weeks ago in Fermenters by Ed Thiry
Hey there! These horizontal dairy tanks have been great to us over the last seven years and we’re sad to see them go, but it’s time to upsize. We have three different tanks: 1,500 gallons (egg shaped tank) 1,600 gallons (cylindrical tank) 2,000 gallons (the cube) We typically did 30-40 bbl batches in these and converted the jackets for glycol. We like to do German lagers and two of these tanks can make a nice cold, clean Helles. The third (1,500 gallon) is better suited for ales. We’re selling these for the best offer we get in the next week or two to make room for the new tanks, so please feel free to shoot me your best offer and we’ll go from there. Buyer to cover the cost of rigging and loading. Our lift can handle lifting the 1,600 gallon tank, but the other two would need a larger...
Used Product Ad posted 3 weeks ago in Fermenters by Andy Davidson
Good condition fermenter bought new 5 years ago. Used a couple of times but has been dormant and empty for the last 3 years. 13ft tall with 6ft circumference with dimpled cooling jacket. 3" drain valve with 2 x 3" port on the top.
Used Product Ad posted 1 week ago in Fermenters by Wyatt Barger
We have four Newlands (NSI) conical fermenters for sale that are used, in good condition, and made in Canada. The price of $12,000 is for each fermenter, not the lot as a whole. The units have been used as recently as October 2021. Please contact for any more information you may require, we are open to any discussions and offers about the unit. Buyer is expected to cover the cost of shipping. More pictures are available on request, there was a problem when posting the classified advertisement that prevented them from being added to this listing.
Used Product Ad posted 3 weeks ago in Fermenters by Mike Cunningham
We have 6 square 350 gallon fermentation tanks with 3 inch out lets, 3 inch to 1.5 inch reducers, temp well, quick disconnect glycol fittings, and a CIP ball welded into the manway (we had these added). We purchased these new in December of 2019 and have used them for fermenting whiskey wash. We are moving to a larger production facility that already has fermentation vessels. One of the 6 was over-presurized and is blown out a bit. It is still fully functional, just not as pretty. The price below is a per-vessel price. We will discount the damaged vessel.