Bottling Equipment

Reset - Viewing: Used Product Ads, Category Bottling Equipment

Used Product Ad posted 4 weeks ago in Bottling Equipment by AgerTank

Now Available - A complete filling line set up for glass bottles with an ROPP aluminum closure.  This line ran non carbonated water for a brief time and would be well suited for distilled spirits, water, or other non carbonated products.  Details follow- Item is a used, ABE/Norland model GlassPak 66 bottling line. The line is rated at up to 70 BPM and includes the following: -Tri-Block 12 clamp rinser / 12 valve filler / 6 head capper. The capping heads are 28mm ROPP. The safety guarding package is glass doors w/safety interlocks. Operation of the machine is clockwise (left to right). One set of change parts for glass bottles is included. Previous use was in bottled water facility. Power requirement is 208-240 volt/3-phase. -48" diameter dump/accumulation (pack-on) disk -Infeed conveyor for the Tri-Block rinser/filler/ROPP Capper. -Discharge conveyor from the Tri-Block -Quick Dry 66 air knife external bottle blower -Videojet...

Used Product Ad posted 3 days ago in Bottling Equipment by Cullen Dwyer

This rinser is configured to convey bottles from a height of approximately 13 feet, and out-feed in the opposite direction at a height of 4 feet.  It grips bottles gently from the side with rubber chain links, inverts them for rinsing, allows drainage to a catch-pan, and turns them upright again.  In-feed section includes idler cog and frame for 4"-wide conveyor chain, as well as "slowerator" side-belts to ensure proper spacing of bottles.  Vertical section allows opportunity to date-code bottoms of dry bottles.  Easily adjusts for various bottle widths with the turn of a single wheel.  Overall dimensions: 15'L x 34"W x 15'H. This is an older machine that was recently decommissioned, and has operated trouble-free for many years.

Used Product Ad posted 3 days ago in Bottling Equipment by Cullen Dwyer

Complete line, currently configured to form mother cartons for 12oz bottle 6-packs.  Included two Pearson 6-pack erectors, Pearson 202 case-former, and multi-packer to stuff the 6-packs into the case.  Also includes driven conveyors: straight chain from 6-pack erectors to multi-packer, 90-degree bend chain from case-former to multi-packer, straight belt from multi-packer (driven accumulation) and 90-degree out-feed belt.  Also includes idle out-feed idle rollers with 90-degree bend.  Case former is missing hot glue pot and heated glue hose. Overall dimensions of current configuration are approximately 42' x 23'.  The line was recently decommissioned.  Priced "to go" as we urgently need to free up this space.

Used Product Ad posted 4 days ago in Bottling Equipment by Ted Birch

Lightly used Barida Semi-automatic bottle filler. Fills bottles from.33 to 1.5L. Mini-Line 1 semi-automatic labeller included. Both items used for short time then stored. $22,000 Canadian OBO.  

Used Product Ad posted 4 days ago in Bottling Equipment by Bill McFee

PRICE REDUCED This full bottling line has served us well for 7 years but we are moving to cans and it needs a new home. The star of this show is the GAI MLE 661 filler, a monobloc 6 head linear counterpressure filler that does double pre-evacuation for ultra low DO values. It features an inverting rinser, 6 head electropneumatic valve filler, fobber, and a rotating turret crowner. It is a very flexible filler with changeout parts for 330 ml, 12 oz longneck, and 750 ml bottles, with crowning heads for 26 mm and 29 mm crowns. We use all 3 sizes regularly and it works well for all. This machine just had a full maintenance service including regasketing by Prospero, the dealer. It has been well-maintained. Full touch screen control. We routinely run this at 1300 bottles per hour on 12 oz longnecks. Also included are: ENO-T3 Labeling machine...

Used Product Ad posted 4 days ago in Bottling Equipment by Lee Martin

super deal.  4 pieces of equipment to complete the process of corking, caging and foil wrapping sparkling or champagne type products.  was acquired with filling equipment and we have no use for these pieces.  wrapped, on palettes and ready to ship. we need the space so motivated to sell and will consider all offers

Used Product Ad posted 5 days ago in Bottling Equipment by Stefan Popescu

Gruber 2 head bottle/growler filler.  Uses CO2 to purge bottles before filling. Easy to clean and easy to use.  Comes with instructional booklet

Used Product Ad posted 5 days ago in Bottling Equipment by Josh Breinholt

***** Price Reduced *****   Looking to upgrade your bottling operation? Look no further! We're offering an efficient and reliable SBC 750ml Cork & Cage Bottle Filler, proudly crafted in Italy. Features: Capacity: 900 bottles per hour Includes labeler, corker, and cager Perfect for small to medium-scale production Ensures precise and consistent bottling Whether you're a winemaker, brewer, or artisanal beverage producer, this equipment will streamline your bottling process and elevate your product presentation. Don't miss out on this opportunity to enhance your production line.

Used Product Ad posted 6 days ago in Bottling Equipment by Adam Shay

Krones XT6 capping heads and spindles, 21 available, $2k each.  See complete list of available equipment at .

Used Product Ad posted 6 days ago in Bottling Equipment by Josh Flinn

Selling a used Meheen 6 head Merlin bottling machine. Machine does not work, selling for parts. Machine was bought by previous brewer and was never functional in this brewery. we are currently selling the machine off for parts.  

Used Product Ad posted 6 days ago in Bottling Equipment by dylan wylde

We are selling our Meheen 6 head filler.  Works great.  Filler, crown capper, rinser.  It fills standard 22oz bombers.  Counter pressure filler.  I am offering this at a steal. $3,000.  We switched to cans 2 years ago and have been storing this Meheen.  I don't want to pay storage on this anymore.  Make an offer.  We need it gone asap.

Used Product Ad posted 1 week ago in Bottling Equipment by Scott Vaccaro

Speed and Efficiency.  Automated and easily configurable for different bottles. Makro cold blue bottle labeler Rotary machine capable of up to 6000 bph Front, Neck and Back label stations Part for 12oz long neck and 500 ml bottles Decommissioned and ready to ship! for pricing and info

To top