New Product Ad posted 8 months ago in Brewhouse or Brewing Systems by Criveller Group (Healdsburg, CA and Niagara Falls, ON)
At Criveller, our brewing systems are all built turnkey and offer several advantages that outshine those of our competitors. All vessels have an impeccable heating and cooling system through our jacket design. With a high percentage of dimples and an internal spacing of 7 mm, our jackets have 130% more heating and cooling potential than tanks with the usual 3 mm gap seen in inflated jackets. All rakes in our brewhouses include an automatic outplow paddle design. This allows the brewer to plow out spent grain just by reversing the direction of the rake. Our water jet cut screens also represent our dedication to detail. Criveller uses water jet cut screens as the standard for all of our false bottom screens to improve drainage, increase efficiency and promote consistently clear wort. Sanitation is always top priority when producing your brews. Criveller is proud to be one of the few North...
New Product Ad posted 8 months ago in Keg Washers by Criveller Group (Healdsburg, CA and Niagara Falls, ON)
This keg washer unit is designed to rinse, caustic wash, sanitize and pressurize kegs. The unit is PLC controlled and is fully customizable to each client’s needs. The general sequence of the program is as follows: Rinsing kegs with water (from city line) and air to discharge possible product leftover Caustic wash kegs and recover the caustic solution Rinsing with water and air Sanitize and recover the solution combined with CO2 Pressurize the kegs with CO2 Rinsing with water, washing with caustic solution and sanitation is enhanced by blowing compressed air or CO2. The discharge is also performed under air or CO2 pressure. This will minimize the time required to achieve this function and will also make sure that no product is left over inside the keg. GENERAL CHARACTERISTICS: 2 separate pumps and tanks for caustic and sanitizer Caustic tank includes heating elements 20-22kegs per hour
New Product Ad posted 8 months ago in Other Packaging Equipment by Criveller Group (Healdsburg, CA and Niagara Falls, ON)
The Mini Line 01 and Mini Line 02 labelers are able to apply front and back labels from the same roll to cylindrical containers, or two separate rolls (Mini Line 2 only). Can be an integral part of various bottling lines. CHARACTERISTICS: Output: 700 bottles/hour Unit capable to work with bottles with diameter ranging from 60mm up to 120 mm; unit can work with different containers May apply wraparound labels Machine built in accordance with C.E. regulations Motor: 220 volt/single phase/60 Hz OPTIONS: Date coding device Square bottle kit Kit for spot detection Kit for pre-labeled bottle Small bottle kit Tapered bottle kit
New Product Ad posted 8 months ago in Keg Washers by Criveller Group (Healdsburg, CA and Niagara Falls, ON)
For over 35 years, Criveller’s dual station keg washer has been a staple in breweries across North America. Criveller has now developed the much-anticipated single station keg washer to support craft breweries, brewpubs, cider houses, etc. Proudly made in North America by Criveller Technicians. Designed for brewers, by brewers. Main Features: One keg at a time 10-12 kegs per hour Automatic cycle Programmable cycle Single centrifugal pump Dosing pump for sanitizer On wheels Caustic tank with heater Thermostat for temperature control of the caustic station