Ryson Conveyors. Location in Georgia. Price is $7000 each Description Overall height: 18ft Width of Belt: 12in Footprint: 63in diameter Endfeed height (floor to bottom conveyor): 22in Conveyor direction: reversible incline/decline direction Shipping Height: 216.00 in Width: 63.00 in Length: 63.00 in
(6) bottle Mori Gravity-Fed Bottle Filler, stainless steel Has always worked great. We are upgrading our bottling system but this is a great gravity-fed bottle filling system. The unit must sit on a table and you will need a pump to move your liquid into the unit and then the bottles fill, via, gravity, to whatever level you want in the bottle. Priced to go since our new bottling unit has arrived.
Used can seamer. We used for one season and are upgrading. Solid workhorse, entry level seamer for line or tasting room. Buyer assumes cost for shipping. Oktober can seamers work with all major can manufacturers. Generally, cans are manufactured to the same set of specifications, regardless of the manufacturer. The MK19.2v2 is super versatile, and can seam many sizes of cans. It comes standard for 19.2oz, 16oz and 12oz “202” end cans. There is a variety of other 202 end cans, like 8oz “stubbys”, 440ml, 375ml, etc. that only require an optional lower adapter. Lower adapters can be swapped out in a few seconds. Sleek and Slim cans, such as 12oz “sleek”, 8oz “sleek” also require the optional “sleek can guide”. The MK19.2v2 can not seam 500ml and 330ml cans.
Used filler. We used for one season and are upgrading. Some spare parts included. Great entry level filler. We used an Oktober can seamer that is also listed through ProBrewer. Buyer assumes cost for shipping. Capacity: (in bottles per hour) 360 12 oz cans Weight: 20 lbs Dimensions: 11.25”w x 17”h x 15.5” deep Power Requirements 115 VAC .7 Amps 50/60 Hz The XF2200 filler is based on our level fill unit with a gas purge cycle and switch that initiates the flow once the can is placed on the shelf. The carbonated beverage filler is a open fill system that fills cans from a pressurized source, such as a keg or brite tank, using a sensor probe that shuts off the fill at the desired height. The fill cycle includes a pre-fill purge with CO2 in reduce the oxygen intake. We have modified the valves and flow path diameters...
Price Dropped! 1995 CIMEC, Italian built, 12-Head short tube filler. Well made, this machine includes double pre-evacuation, vacuum pump & conveyor motor. Rinser is contained in 11' long cabinet, twist rinser. The rails are set for 12oz long neck bottles, includes liquid return/recycle basin with screen and pump. AROL single head capper. Misc change parts ARE included plus the conveyor sections. You will need pack on & pack off tables, and a little TLC to get this back into production status. This bottle filler system will be great for your Kombucha, specialty beers, sours and the like. Motivated to sell, call or email to discuss. The photo does not do it justice; it can come back to life and functionality with a little work. more pics to come!
1997 Meheen 4 head bottler for sale. This is set up for 12 oz Heritage bottles and was a workhorse for us. Comes with bottle sanitizing station.
This bottle filler has been as reliable as we could have ever hoped for and it is sad to see it go, but we just aren't using it enough. DO pickup is typically 10-20 ppb running a max speed on 341mL bottles. We also have the changeover parts for the standard 650mL bomber bottles. It has ~7,000 hours of operation. It was decommissioned in Jan 2020 by a Krones technician. We have some video, more pictures, and maintenance records from Krones that we can supply if requested. Please let me know if you're interested. PS: We also have a Kosme cold glue labeller for sale in another ad.
This labeller has been used to apply cold glue cut-and-stack labels to 341mL bottles (neck and front body, previously also a back body). It has ~5,000 hours of run time. It was decommissioned in Jan 2020 by a Krones technician. We have some video and more pictures that we can supply if requested. Please let me know if you're interested. PS: We also have a Krones Mecafill bottle filler for sale in another ad.
For Sale 2012 Meheen 6-head bottler, rigged for 22-oz bottles This is a 2012 Meheen 6-head bottler, set up currently for 22-oz bottles. Since it is 2012 it has the updated, and still supported software from Meheen. This can be converted to fill 12-oz bottles, that is the huge advantage of the 6-head filler of the 4-head. We bought this used and have used it for about 2 years, it works great. It is still commissioned, and functioning, and we would gladly give you a walk through and let you operate it for a day. It includes the side bottle sprayer for rinsing bottles. Also includes two of the 24-pack cherry pickers, for picking up 24 bottles and placing them on the machine. This works great, we are selling because our damn state government only accepted two of our beers in the liquor store in cans, not bottles, and...
CBK Filler IFC 6-6 Automatic Filler and rinse table for sale. Fully automated counter pressure filler for filling 12 ounce long necks and 22 oz bombers. Double evac CO2 and automatic crowner. Comes with a 24 bottle rinse table for both sizes. Currently set for 12 oz but can be changed out for 22 oz bottles. We achieved a fill rate of approximately 12 cases an hour. Manual load in and out of bottles. Machine works great and has been lightly used! We bought it with the intention of growing distribution and our business model has changed so we will no longer need it. Original list price was $60,000 new. Asking $29,500. You pay shipping from Reno, NV (89511). We will ship in the original manufacturers crate. One stop shopping; we have 4.5 pallets of bottles for sale also!
This sale includes an 18/18/6 Glasspak 66 Rinser/Filler/Crowner, Rotary Depal Table, Pressure Sensitive Labeler, Markem Imaje 9028 Date Coder, Crown Hopper and Elevator, Post Rinse Dryer, and Pack Off Table, Diaphram Pump, and spare parts. Everything you need to package. This unit runs 66-70bpm easily and up to 74bpm depending on the beer. It is set up for 12oz standard longnecks currently and has all changeover parts for standard 22oz bomber bottles. The rinser, filler, and crowner are all adjustable to accommodate most any standard bottle size. Double Pre-evacuation of bottles prior to filling. We average about 40ppb O2, we’ve seen bottles as low at 16ppb using our Anton Paar Cbox. PLC Touchscreen with user-friendly controls. We have this line setup in a semi U configuration to take up the smallest amount of space possible, approx 330” x 185”. It could also be set up in a straight line configuration...
2016 Meheen M6 Filler/labeler/Air Compressor. Stubby bottles. Available immediately. Avoid the can shortage. ( $45,000 )New Hot
This Meheen bottle filler and labeler was custom made for stubby bottles. It can be modified by Meheen to fit any bottle. Everything works as it should. Very compact and mobile. This is available immediately along with the name of a bottle supplier with bottles in stock. Bag of replacement parts included. Also includes Ozark 80 gallon Air Compressor. Everything you need to start bottling. Make your bottles stand out on the shelf. Start bottling next week. We will palletize and ship as soon as this week.
Like New 2017 Meheen M6 w/Labeller. Set up for Stubbie Bottles (BN017) Unit has less than 10,000 bottles run through it (2-3 skids). Comes with all spare parts that shipped with the unit when we purchased new from Meheen. M6 Filler with Labeller $80,000 CAD plus shipping M6 Filler only $70,000 CAD plus shipping Please email if interested. Located in Calgary, Alberta, Canada. All reasonable offers will be reviewed.
We are selling our Meheen M6L. It was purchased brand new in June of 2017 and has worked extremely well for us. It's in perfect condition Full specs can be found here. https://wildgoosefilling.com/wp-content/uploads/2019/09/WGF_BottlingBrochure_2019-Q4_SpecSheet.pdf
This is a SAMS V1 but it has both the push-arm upgrade and User Interface upgrade featured on the v2. The new V2 design launched in 2019 removes pneumatics from the can Push 2 cylinder and replaces it with a significantly more reliable and easier to setup linear ball screw drive. Upgrade kits are available for V1 units. Incredibly compact footprint makes the SAMS an ideal starter system for those with space or budget constraints. SAMS V2 now features individual fill head control easily adjusted on the fly from the upgraded HMI panel, complete with recipe memory capabilities. Upgrade kits are available for V1 units. Adjustable fill level sensors make precise, repeatable fills across all 3 fill heads. Requires only two operators. Mobile canning ready with addition of castor wheels. Simple change over between multiple can heights (i.e. 12 oz and 16 oz). Multiple post-packaging options available including wrap around...
90's era 4 head meheen bottling line. we used it for approximately one year. good cheap way to get into packaging, but you have to be good with a wrench. was operational when we quit using it this January. uses 12 oz heritage bottles. asking 10,000 obo.
For sale is one gently used DK Technologies MB04 Microbottling Line. We used this machine only twice in 2 and a half years and have have decided instead to go all in with our canning operation. This is a 2017 line that has been very well cared for during it's time here. Manufacturer is offering the lucky buyer the opportunity to have the machine shipped to their facility for a once over, add any options, and then ship to you the buyer. We are asking $15,000.00. Price does not include shipping. Here is what is included on the machine: Micro Bottler Machine Wheeled Base Compressed air provisions Standard Fill Valve Asm Machine Cover Die Size: 26.5 mm
CBK Filler IFC 6-6 Automatic Filler and rinse table for sale. Fully automated counter pressure filler with capper. It can be used for filling 12 ounce short necks and 22 oz bombers. Double evac CO2 and automatic crowner. Comes with a 24 bottle rinse table for both sizes. We filled 800-1000 bottles an hour. Currently set for 12 oz short neck but can be changed out for 22 oz bottles. You would need to contact manufacturer for change over parts. We have changed our packaging. $60,000 new. Asking $18 000. Priced to sell immediately. Contact me for photo's or any information
Used 6 head Meheen Filler. Setup for a 330ml Vichy bottle, but can be modified to fit another bottle of similar size. Purchased in 2014, and was discontinued in use due to increase in production and purchase of a larger bottler. We were able to package 27HL in a shift with a 4 man crew on this bottler.