Other Packaging Equipment

New Product Ad posted 4 months ago in Other Packaging Equipment by IDD Process & Packaging, Inc.

The recommended minimal standards when operating an IDD 'PurePass' Flash Pasteurization Systems are outlined below. They are intended as a guide and in no way over‐ride or supplant EPA, FDA and HACCP standards required by law where applicable. The process and packaging of product can be broken down into the following areas: Product – Beer Product preparation – batching, blending, carbonating equipment Package materials in contact with the product (i.e. bottles, cans, crowns, lids and caps) Product 'Flash Pasteurization' Package handling and filling equipment Product preparation and packaging areas Personnel and personal hygiene 1. PRODUCT used in the final product must be maintained in a clean and sanitary environment to prevent microbial growth in the product. Additives, etc. should be in a dry, cool area and liquids in a cold room at <38°F/3.5°C to prevent mold, fungal and bacterial growth. Frozen concentrates should be thawed at low temperature in the...

New Product Ad posted 2 months ago in Other Packaging Equipment by Alpha Brewing Operations

Pack-off is the most labor-intensive aspect of canning. The “Mini-Gun” 4 – 6 pack carrier applicator offers instant return on investment! The Mini-Gun is the quietest, smallest, most efficient applicator in the industry. – Less than 1 full load amp (4 amps with conveyor). – Less than 2 cfm compressed air. Wait till you see the price! The Mini-Gun pairs perfectly with the Beer Cannon series of canning lines from Alpha or fit to any existing canning system. We have a new web site – check it out: www.alphabrewops.com and request a quote. Cheers!

Used Product Ad posted 4 months ago in Other Packaging Equipment by IDD Process & Packaging, Inc.

One of our customers is looking to upgrade his 30 hL Flash Pasteurization System (FP2). Therefore, we are pleased to put this 2014 FP2 on sale. This system is designed for a 92% energy recovery. Price: $66,000.00 as is, where is. Shipping at buyer’s expense If you have any questions about this system, please feel free to contact Jeff Gunn at jeff@iddeas.com or Calley Hoffman at choffman@bev-hub.com

New Product Ad posted 4 months ago in Other Packaging Equipment by IDD Process & Packaging, Inc.

We listen, learn and respond... Being advocates of pasteurization, we at IDD have for years designed and manufactured a full range of fully automatic Flash Pasteurization systems to meet the needs of the beverage industries large and small. There is an abundance of Tunnel Pasteurization systems manufacturers available in the market for those that feel more comfortable with in-package pasteurization, but nothing to suit small footprint, inline processing and efficiency for the craft industries can lines doing up to 75 cans per minute. We have thought outside of the box and come up with a box to keep the footprint small, the energy consumption low and the efficiency high. We’re calling it the Rotary Pasteurizer or RP1 (35 cans per minute) and RP2 (70 cans per minute)   Service Features & Benefits *Compact – 12’L x 9’W x 8’H *35 and 70 CPM nominal outputs *Up to 100 PU’s *Temperature...

New Product Ad posted 6 months ago in Other Packaging Equipment by Cask Global Canning Solutions

The Cask MCS V2 is a simple to use, compact canning system geared for packaging every type of craft beverage in any can format. The MCS V2 is the most cost-effective distribution quality canning system available for crat beverage markers. Speed: 10 cans/min; 25 cases/hour Footprint: Compact Footprint: 1' x 4' / 4 sq ft Growth: Geared for helping craft beverage makers get their product into more hands quickly and easily, and allowing them to grow their business Filling Tech: Cask offers the only filling technology on the market that can create and manipulate foam for optimal protection against oxygen Any Beverage: Higher carbonation capabilities (3.2 vol CO2) & all Stainless Steel components and CIP capabilities enable cross-over of any craft beverage BOOK A DEMO OR QUOTE   Package any can format:

Used Product Ad posted 8 months ago in Other Packaging Equipment by Criveller Group (Healdsburg, CA and Niagara Falls, ON)

A quality rinser or sparger is an important part of any beer bottling system. Criveller represents THE leading rinsing company in the world. Semi-Automatic Rotary Rinser with various models available (10 or 20 pockets). Speed ranges from 300 to 1.200 bottles per hour depending on the model. Fully auto Rinser turrets have been installed in large facilities, including Dasani and Coca Cola to small craft breweries looking for the best Rinsers on the market. CHARACTERISTICS: The rotary rinsing machine is designed to rinse new bottles and clean the inside from dust or any small particles prior to the filling operation; rinser is supplied with a filtering assembly for water. Rinser works as follows: Manual loading of the bottles on the rotary table Sterile water rinsing jet Dripping Unloading of the rinsed bottles Water consumption: 30-40 L/H – 10 pocket 40-60 L/H – 20 pocket  

New Product Ad posted 8 months ago in Other Packaging Equipment by Criveller Group (Healdsburg, CA and Niagara Falls, ON)

The Mini Line 01 and Mini Line 02 labelers are able to apply front and back labels from the same roll to cylindrical containers, or two separate rolls (Mini Line 2 only). Can be an integral part of various bottling lines. CHARACTERISTICS: Output: 700 bottles/hour Unit capable to work with bottles with diameter ranging from 60mm up to 120 mm; unit can work with different containers May apply wraparound labels Machine built in accordance with C.E. regulations Motor: 220 volt/single phase/60 Hz OPTIONS: Date coding device Square bottle kit Kit for spot detection Kit for pre-labeled bottle Small bottle kit Tapered bottle kit

New Product Ad posted 3 months ago in Other Packaging Equipment by QuantiPerm

Direct to filler option. Carbonate-and-Fill from dead-flat to up to 4 v/v and line speeds up to 25 gpm. Send product directly to a filler, with no intermediate tanks! The system employs a small buffer tank to consistently supply your packaging line in the face of intermittent filler interruptions. Just specify how much carbonation you want and let the system go! Use for up to 270 cans per minute!

Used Product Ad posted 5 months ago in Other Packaging Equipment by Iron Heart Canning

PLEASE CONTACT UsedEquipment@ironheartcanning.com FOR MORE INFO. OBO Unit in video available, along with two more units! Located in Manchester, NH Buyer responsible for Crating and Freighting of labeler or pickup.

New Product Ad posted 5 months ago in Other Packaging Equipment by Palmer Beverage Systems

Can Warming Tunnel Stainless Steel Construction Compact Design Serpentine Conveyance Control System with Status Light Hot Water or Steam Optional Stainless Steel Belting Optional Discharge Blower

Used Product Ad posted 4 weeks ago in Other Packaging Equipment by Kayla McIntyre

ProCarb is a state-of-the-art, industry leading inline carbonation system that delivers the most accurate, consistent, easiest and quickest in-line carbonation in the industry. ProCarb is based on extensive research, development and the science of how gases like, CO2 and N2 are absorbed into beer. ProCarb combines this know-how with world-class control technology into a reliable, easy to use, carbonation system. This system has only been used about a dozen of times and worked extremely well, we just unfortunately no longer have a need for it. Specs: Glycol to plate heat exchanger: Supply– 15 GPM @ 28°F Return – 15 GPM @ 40.6°F CO2: 75 lbs/hr @ 120 psig Air: 20 SCFM @ 90psig Electric: 240V/3ph/60hz @ 30 amp