Used Product Ad posted 2 weeks ago in Miscellaneous Equipment by William Winn
350 gallon holding tank on wheels. Comes with attached lid and bottom valve
Used Product Ad posted 3 weeks ago in Miscellaneous Equipment by Eric Addison
8 Panels, with 6 RTDs and glycol valves and RTD wires
Used Product Ad posted 4 weeks ago in Miscellaneous Equipment by aaron heldreth
This is a jacketed vessel which was converted from dairy use now used as a hot liquor tank. This could be a multi-use vessel. $2,500 Please Contact me with any questions Vessel is currently located in Barstow Ca 92311
Used Product Ad posted 4 weeks ago in Miscellaneous Equipment by mtnSpirits -
Very lightly used for 1.5 years. basically new!
Used Product Ad posted 4 days ago in Miscellaneous Equipment by dan stouck
Malivoire Wine Company. in Beamsville Ontario has decided to part with their wood cuves that hold 3Tons of grapes which has fermented wine in them since 2005. They do not leak and hold water once swelled. The top are open but comes with a removable lid. There is a 2 inch valve and a hatch to empty out the bottom. We have 5 of them for 3500 each. If interested, please call 905 563 9253 and ask for Dan
Used Product Ad posted 4 weeks ago in Miscellaneous Equipment by kevin ronald
Used Product Ad posted 2 weeks ago in Miscellaneous Equipment by Thorin Peiser
50 lb capacity. Used once then cleaned and stored dry. Still has tape on the wheels from when originally shipped. Too big for our operation. Located in Austin, TX. From CPE website: (https://www.cpesystems.com/products/mh-20-hop-induction-system) “The MH-20 Hop Induction System (HIS) greatly increases the ease and safety of the dry hopping process. Attached to select centrifugal or shear pumps, the MH-20 HIS hygienically suctions hops into your beer with minimal oxygen introduction. This completely eliminates the need for scissor lifts or shaky ladders, decreasing workload and greatly increasing safety. With the MH-20 HIS just load your hops, start your pump, turn the valve, and within minutes your hops are in the tank. We have added a pneumatic vibrator to the hopper to improve the flow of the hops and to help prevent bridging and clogs. We've custom designed the MH-20 based on feedback from our local breweries: Light and easy to move...
Used Product Ad posted 2 weeks ago in Miscellaneous Equipment by Adam Shay
Tank control panel, built inhouse. Other equipment also available.
Used Product Ad posted 2 weeks ago in Miscellaneous Equipment by Adam Shay
Small pressure vessel built inhouse using Precision Stainless Tank S/N 5924-23, 1998. Other equipment also available.
Used Product Ad posted 4 weeks ago in Miscellaneous Equipment by Ryan Evenson
We’re selling two 15 bbl Foeders from Foeder Crafters of America. One used for various Brett brews and the other for non-Brett beers only. Light toast with front and top manways, CIP spray balls and a plate chiller included. All fittings included. They weren’t used a lot. Made awesome beers, but we just don’t see the demand for them that we thought in Northern Minnesota! Selling for $6000 each, or both for $10,000 OBO. Buyer to arrange shipping from Hallock, MN. Let me know if you have any questions!
Used Product Ad posted 4 days ago in Miscellaneous Equipment by Robb Watson
Generates beverage grade nitrogen safely and efficiently from the air. Never run out of mixed gas again 99.8% + beverage grade nitrogen Eliminates over and under carbonation of beer which reduces waste Cut out the middleman – no more scheduling and deliveries Improve operating efficiency and employee safety Simple installation – light weight tank, wall and floor mount options Dual-bed, PSA (Pressure Swing Adsorption) technology Equipped with the patented BlastOff™ – Gas Leak Detection System 14 SCFH Nitrogen production Max pints/min: 40 Wall or tank mount options BlastOff Leak Detection System
Used Product Ad posted 2 months ago in Miscellaneous Equipment by Jeff Empric
Axon tamper evident bander and heat tunnel bander model- #EZ-130 heat tunnel- Axon ThermoRay shrink sleeve tunnel speed up to 150 ppm used for applying shrink sleeve/tamper evident bands containers. Can we used in beverage, supplements ect.. pick up in Buffalo, NY. Will ship.