Keg Washers

Reset - Viewing: Used Product Ads, Category Keg Washers

Used Product Ad posted 13 hours ago in Keg Washers by Wade Brown

Used 2 head manual keg washer heating element replaced in March 2024 ($725 USD) keg lines just replaced with braided hoses overall in good shape for 5 years of use at a taproom focused micro brewery. $5000 USD obo retails for 10k USD at GW https://www.gwkent.com/manual-beer-keg-washer.html

Used Product Ad posted 18 hours ago in Keg Washers by Ryan W

Have any questions or inquires, text or call me, names Ryan- 443 938 0043. East coast 8am to 8pm. Keg washer is branded by Shandong Yuesheng Beer Equipment CO. I've bought equipment before from Shandong Yuesheng Beer Equipment before, my brew house, fermenters, brite tanks, Mill and CIP. Ordered more fermenters and a keg cleaner, then covid hit, budget was stretched, ended up closing. We have chosen NOT to reopen. Unit has never been used, Siemens touch screen display and siemens PLC, fully programmable. Unit uses electric heat for both its reservoirs. 208 volt 3 phase 15kw requires 50 amp service. Requires compressed air for operation to include water hookup and CO2. Full SS construction. Its a solid machine, was meant to save money in the long run vs paying for kegs to be cleaned of site. No need for it anymore. Willing to lose money, $8k obo. This a...

Used Product Ad posted 2 days ago in Keg Washers by Jason Hansen

Comac K2 Washer/filler in working order. Used in a 25,000 bbl year brewery. First head – Step 1: Purge with air, Step 2: Caustic CIP, Step 3: Rinse Second head – Step 1: Sanitize with steam, Step 2: Purge with CO2, Step 3: Fill Spec sheet and documentation on request.

Used Product Ad posted 4 days ago in Keg Washers by Eric Addison

Only 1,000 kegs run through it.

Used Product Ad posted 5 days ago in Keg Washers by Hkw8599

For sale is a keg cleaner, manufactured to remove the keg stem and set any size keg on it to clean.

Used Product Ad posted 7 days ago in Keg Washers by Morgan Smith

Sankey III Keg Washer/Racker (4 station, 230/3/60) (Stock Code YKEGWSH-3P 4STN) Stainless steel construction c/w glass bead finish Fills one to four kegs simultaneously Cleans one to four kegs simultaneously Stainless steel centrifugal pump Portable on two rigid castors Large solution tank with cover and heater Pump motor starter & switch pre-mounted for easy hook-up Fills 40, cleans 28 kegs per hour. Oil free air at 7 - 15 SCFM @ 40 psi REQUIRED Water at 50 - 70 psi and 40 - 70 GPM REQUIRED Full load amperage 22Amps, 208 Volt, 3-phase, 60Hertz Buyer responsible for any shipping charges.

Used Product Ad posted 2 weeks ago in Keg Washers by scott christian

We purchase this unit used for our startup brewery a couple years ago, but unfortunately it won’t work for us.  This is a 3-phase 240v semi-auto keg washer with connections for co2, compressed air, and water, and has a heated tank for caustic and an unheated sani tank.  Unit turns on, but we have not used it.

Used Product Ad posted 3 weeks ago in Keg Washers by Josh Chambers

Stainless steel construction Fills one to four kegs simultaneously Cleans one to four kegs simultaneously Stainless steel centrifugal pump Portable on two rigid castors Large solution tank with cover and heater Pump motor starter & switch pre-mounted for easy hook-up Fills 40, cleans 28 kegs per hour. Buyer responsible for any shipping charges. https://dme.ca/beer/supporting-equipment/keg-washer/

Used Product Ad posted 3 weeks ago in Keg Washers by Jason Bell

DME Keg Washer with- Application: cleans & fills kegs Output rate: Fills up to 40 kegs per hour Cleans up to 28 kegs per hour Keg size range- Minimum 20 liters Maximum 50 liters Fully portable Includes supply pump with motor. Stainless steel construction Works well. Ready to ship. 460V for efficient operation.

Used Product Ad posted 3 weeks ago in Keg Washers by Chris Cates

Older 90's Specific Semi Auto Keg Washer for sale! We purchased this in working condition from another brewery but I *have not* personally used it, that being said I have no reason to believe there would be an issue. We bought this fully intending to use but due to some unforeseen expenses we are forced to sell to recoup some money. Note the washer does require 208 3 phase. Buyer responsible for shipping or preferably local pick up! We are located in Johnson City, Tennessee. Thanks for looking!

Used Product Ad posted 3 weeks ago in Keg Washers by Rob Phillips

This is a wild machine – made in China, but it works and does a good job.  We used it for the past 7 years, and it was a workhorse for us.  We do have a user manual that is in English. Currently it is throwing a breaker on the rinse cycle, and we have narrowed it down to something in the pump.  We cannot take more time to chase it down as we have already replaced it with a newer model. If you are a sharp sparky, this will be an easy repair. Comes with two pumps, heater, reservoirs.  Has to hook up to hot water.  We rigged it to sanitize the kegs as well. Cleans 1/6 bbls and ½ bbl Sankey topped kegs. Hooks up to air for purge, and CO2 for finish pressure.  Does seem to leak pressure if the kegs are left sitting on top of...

Used Product Ad posted 3 weeks ago in Keg Washers by Jeff Tobin

Three station (keg), three tank (caustic, acid, rinse), semi-automatic keg washer/sanitizer. Includes stack light status indicator, sanitizer purge feature. Well maintained, this is a workhorse. Just connect kegs, press the start button, and everything is automated. Return minutes later to remove your cleaned, purged and sanitized kegs.

To top