New Product Ad posted 12 months ago in Filtration by Ripley Stainless Ltd.
GC valves model # S201GF16N5EG5E 2 way N.C. Zero dif 3/4" NPT 90 psi max voltage: 24 DC qty: 55 pcs
New Product Ad posted 12 months ago in Filtration by Ripley Stainless Ltd.
Top Flow Sanitary pump 1.5HP, 1445 RPM model qty :1
New Product Ad posted 12 months ago in Filtration by Ripley Stainless Ltd.
Ampco CB+114 Fluid End, c/w MaxMotion SS 3HP Wash-down Motor 1800 RPM Qty: 1
Used Product Ad posted 11 months ago in Filtration by Ager Tank & Equipment
1 available - Used 2 tank cip skid with 2 tanks of approx 60L capcaity, One of the tank is outfitted with an immersion style heater. The skid is hardpiped with a centrifugal pump and control panel has temp readout and pupm controls. The skid is mounted on casters for mobility. A comparable new unit selld for $6500. This unit has seen very limited use and is available to ship immediatley. Selling Price - $2950 Jason - 503.780.4681 - call/text for delivered price to your facility.
New Product Ad posted 10 months ago in Filtration by Marks Design and Metalworks
Check out the MARKS Parts Store for your butterfly valve needs. We offer many sizes and fast shipping. Available Sizes: 1.5" TC - 304SS 2" TC - 304SS 3" TC - 304SS 4" TC - 304SS 1.5" TC - 316SS 2" TC - 316SS 3" TC - 316SS 4" TC - 316SS 6" TC - 304SS 0.5" TC - 304SS 0.5" TC - 316SS 1" TC - 316SS 1" TC - 304SS 2.5" TC - 304SS 2.5" TC - 316SS Prices vary depending on selection.
New Product Ad posted 7 months ago in Filtration by SunGood Machinery
https://www.youtube.com/shorts/96mui3LRZzU Pls check the video. The key designs of SunGood hop gun: Materials:100% SS304,100%Sanitary built,Heavy duty design; 1)Use ball valves,as the flow rate of ball valve is larger than butterfly valve’s ; 2)Larger drain out 2.5"TC to make sure dump out easily to avoid blocking(for larger size); 3)High quality filter,laser cutting version,with lock device. 4)High quality parts/gauges valves etc,and high quality casters; 5)CIP rotary cip balls inside(for more than 100L); 6)Top fixed on the filter to avoid shaking when do recirculation; 7)Heavy duty design between legs also set up brackets between legs; 8)Conical hopper design on the bottom section,to make sure dump out easily; 9)All sections can be disassembled and can be cleaned easily,100% Sanitary grade; 10)Multi-inlets to make sure that the pellets or hops can be soaked 100%; 11)The bottom ball valve is 3 ways,the middle port will be an inlet when you do recirculation, to make sure no blocking at the bottom of hop gun and to make sure 100% extracted at the bottom,no dead corners. Comes with High Quality Pressure Gauge,Adjustable PVRV,Valves,Heavy duty clamps etc; Standard Prices as follows: Prices without shipping cost as follows: 1KG hops-10L:910usd 2KG hops-20L:955usd 3KG hops-30L:995usd 5KG hops-60L:1250usd 10KG hops-110L:2280usd 15KG hops-160L:2889usd 20KG hops-220L:3985usd 30KG hops-330L:4287usd 50KG hops-550L:4690usd 60KG hops-700L:4998usd 80KG hops-1000L:5686usd
New Product Ad posted 7 months ago in Filtration by SunGood Machinery
Sanitary centrifugal pump 120v,60hz,1p/240v,60hz,1p 208v-240v,60hz,3p Materials:SS304 or SS316L cUL listed Motor Open impeller, VFD(Variable Frequency Drive) Price start from 699usd We have lots of designs to fit your requirements.
Used Product Ad posted 6 months ago in Filtration by Sound Brewing Systems
Nice heavy duty little filter 18 plates approx 12" x 12" Asking $950.00 Crating and shipping available Contact trevor@soundbrew.com
New Product Ad posted 6 months ago in Filtration by M.G. Newell Corporation
WCB Sanitary Centrifugal pump, Model C114 with a 1.5 HP motor (3500 rpm), mounted on a 2-wheel cart with variable frequency drive. Deliverables Sanitary centrifugal pump by Waukesha Cherry-Burrell Model C-114 Connections – sanitary triclamp Impeller diameter – 4” Type D single mechanical seal (carbon vs SS back plate) Buna elastomers Finish – 32Ra Baldor 1.5 HP, 3500 RPM, washdown enclosure, 56C frame Cart Made of round tubular 304 stainless steel, polished finish 2 solid rubber wheels with front support post. Handle for operator use (broke back). Variable Frequency Drive – AC-Tech, NEMA-4X enclosure, 230 Volts AC. Pump and drive mounted on cart and pre-wired. 20’ of power cable (no plug) – plug added at no cost once power requirements are known For pricing or information, please email sales@mgnewell.com. Please do not leave a comment as the website does not notify when comments are added. Thanks for your interest.
Used Product Ad posted 1 month ago in Filtration by beerbros
We are selling our 2015 Alfa Laval Brew 80 centrifuge. We bought it in 2019 and had Alfa Laval overhaul it at that time. Total runtime hours are 1,483 and it works great. We will also include tools, 208v transformer, and any parts we have. Please email me at mickeyatmickduffsdotcom if you're interested or have any questions. Cheers!
Used Product Ad posted 4 weeks ago in Filtration by Shane Dickman
Selling two hardly used lenticular filter housings (w/new mediums - 1800 value ea.) used to polish beer or solutions. Images of units: https://www.dropbox.com/scl/fo/pjcbgulu87520ml84kouu/AEfMg1Nik0oPY6M-e2x6HBw?rlkey=4du8ugu2chzxz4q55knofamfa&dl=0
Used Product Ad posted 4 weeks ago in Filtration by Robert Deering
This is a high quality 316L stainless steel split lenticular filter housing that can be used with 12" or 16" filter modules. Includes 2 high and 4 high posts, stainless deflection plate and stainless extender for use with 4 modules (not shown in photo). Includes required clamps, 2" TC tee with reducer to 1-1/2" TC with pressure gauge, and pressure gauge on top to monitor differential pressure. Two 2" TC valves included. Rated to 75 psi at 200 F. Can be cleaned with hot water or steam. This filter is too large for our needs. We will accept reasonable offers.