Currently active classified ads posted by Jason Ager
6 available - price is per tank - Item is a used Prospero SK 60 bbl fermenter. The tank is imported from Europe with excellent design/build quality. The tank is outfitted with cooling jackets on the sidewall and cone, side manway door, bottom discharge port, racking port in the cone, sample valve, thermometer, cip ball and arm, seperate blow off arm with pressure gauge, and four legs with cross braces and footpads. This item was built in December 2017 and installed in mid 2018. Item is excellent condition and offered at a fraction of new cost. Price is per tank - (6) available. Call/Text/Email for delivered price - Jason - 503-780-4681 Sale Price - $10,250 each
Now Available - Item is a used, Lantech model Q300, semiautomatic pallet stretch wrapper. The machine is capable of 25-30 loads per hour. Maximum load height is 80", maximum load weight is 4,000 #. It has a 65" turntable and the optional pallet jack ramp is included with the machine. It is equipped with the power roller pre-stretch capable of 200% maximum. Power requirement is 20 amp/120 volt/single-phase. The machine was removed from service this week and is available for shipment immediatley. Please call/text for delivered price to your door. Selling Price - $11,000 Jason - 503-780-4681 call/text
1 available - Item is a used Sprinkman 90 bbl jacketed brite tank. This tank was built in Wisconsin in 2015 and has been used in a brewery up until recently. It is 90 bbl / 2790 Gal working capacity with a gross volume of 99 bbl / 3057 Gallon. This tank is designed as a brite tank for carbonation. It is equipped with a side manway door, PRV, cip ball/arm, separate blow off arm, site level tube, and 4 legs with cross bracing. Dimensions are approx 8'6" diameter x 13' overall height. The tank is currently installed in a brewery but available for rigging and shipping now. The tank is in excellent mechanical and cosmetic condition. Price includes loading on buyers truck. Please provide you delivery address and I will quote delivered price to your facility. Sale price - $12,000 Jason - 503-780-4681 call/text
(1) available – This is a used 40 bbl jacketed brite tank. It was built in Approx 2018 and remains in excellent condition both cosmetically and mechanically. It is outfitted with glycol jacket, side manway, CIP, PRV, carbstone, 4 legs with cross braces and adjustable footpads, and assorted fittings. The interior of this tank is high polish and in excellent shape. The tank is clean and free of beerstone. The tank appears to be built by Glacier Tank and new Cost is $23,000. (1) available and loading is included. We can offer competitive shipping to your door. Jason 503-780-4681 call/text Slae Price - $11,750
2 available - Craftmaster 2 bbl conical jacketed fermenters with top manway, cip, glycol jacket, 4 legs with cross braces and wheels for mobility. These were recently purchased new by a cidery and where never put into service. We have removed one of them from it's shipping cradle for photos but will reskid a and wrap in plastice for shipping.Price is per tank - 2 available. Please call/text for delivered price to your door. Jason - 503-780-4681 Selling price - $3950 each
1 available - Item is a used Premier Stainless 40 bbl / 1230 Gal jacketed Brite Tank. The tank is insulated glycol jacketed and stainless clad. It is designed with a side manway, cip, prv, site level tube, and 4 legs with cross bracing and adjustable footpads. Dimensions are approx 5'6" diameter x 10'6" tall. The tank is currently installed in a brewery but available for rigging and shipment now. Condition is very good and the tank is ready to be put to use. Please call/text with your delivery address and I will provide a price for delivery to your door. Jason - 503-780-4681 call/text Sale Price - $10250
Now Available – Used 2018 Premier Stainless 3 head keg washer. We purchased this unit for a client but they no longer need a keg washer so this one is for sale! Model KW-SA-3V-CS-A Keg Washer 3-Station. 3-reservoirs, 208-230, 17.5, 3 Ph, 60 Hz. Described by the manufacturer as follows – Manually loaded and PLC operated keg rinser, washer, sanitizer with adjustable CO2 pressurizing capabilities. Designed to clean up to 30 kegs per hour. Easy to use and fully programmable operator interface for optimum cleaning flexibility and efficiency. The machine is currently in a brewery but scheduled to be removed and shipped within the next 2 weeks. PLease call/text and I will provide an economical shipping quote to your door. Selling price – $11,250 Jason – 503-780-4681 Call/Text
Item is a used, Interpack USA, semiautomatic, top/bottom case taper with the Pack Station. The Pack Station consists of an extension of the infeed to the machine to allow manual packing of a carton before entering the machine. It has extended side belts as well as top/bottom flap ploughs. It is equipped with Interpack model HDS tape heads (top/bottom) that accommodat 2" wide tape on 16" rolls (maximum). Minimum/maximum cse size is 8" - infinite = L; 8" - 20" = W; 2" - 24" = H. Power requirement is 120 volt/single phase. Manuals are included. Replacement cost today is approximately $13,500. This machine has been lightly used and remains in excellent shape - ready to go. Sale Price - $6950 Jason - 503-780-4681 call/text for delivered price and additional photos.
One available - item is a used Criveller 5 barrel jacketed bright beer tank. The tank measures 74" tall by 34" diameter and is outfitted with dual sidewall jackets, CIP ball and arm, PRV, sample valve, carbstone, bottom center drain and secondary drain with standpipe. The tank has a level gauge, thermometer, and side manway door. The tank is dimple jacketed with dual jackets, however, it is not insulated. The tank is fitted with three legs with adjustable foot pads. Item was last used as a brite beer tank in a brewery and remains in excellent condition. Jason - 503-780-4681 call/text for delivered price Selling Price - $3950
(1) Available - Used Practical Fusion 40 bbl conical unitank fermenter. This tank was built in Portland, Oregon and was used in a brewery until very recently. It is designed with a top manway door, 3 cooling zones, CIP arm, separate blow off arm, bottom outlet with stand pipe for racking, level indicator strip, 4 legs with seismic cross braces and adjustable footpads. This tank is represented in excelllent shape and ready to use. This is a really well built, USA manufactured vessel with top quality features and is cosmetically and mechanically in excellent shape. Price includes loading and we can offer competitive shipping quotes to your door. Selling Price - $12,500 Jason 503-780-4681
Now Available for sale – we have a used Criveller 30 bbl brewhouse that has been reconditioned with new Thomson wash down pumps and custom brewhouse control panel. Piping has been upgraded and new valves have been utilized. It was refurbished for a client who is no longer pursuing expansion. Details as follows: Criveller 30 bbl 2 vessel steam heated brewhouse. The system was built new in approx 2012 and was in service until June 2021. This package includes the following: Criveller 30 bbl Mash/Lauter tun with 5 hp top mounted rake assembly and side grain out door. This is a steam heated vessel. Criveller 30 bbl brewkettle/whirlpool with steam jacket for heating (bottom and sidewall). Stainless steel brewers platform. Single Stage heat exchanger New UL listed USA built control panel with brewhouse temp controls and pump controls along with rake drive controls. (2) new Thomsen washdown centrifugal brewhouse pumps....
3 available- these are used 15 bbl conical fermenters that appear to be built by Glacier Tanks or Premier. These are set up with side manway door, CIP, PRV, 4” dry hop ports, 1.5” racking ports with racking arms and valves. 1.5” bottom port with valve, sample valve, 4 legs with cross braces and adjustable foot pads. The tanks have cooling zones on the cone and sidewall. The interior of each tank is high polish and welds are ground and polished. Condition is excellent. Price is per tank and loading is included. Dimensions are 10’6” tall x 52” diameter. Really nice cosmetic condition and ready to use. Selling Price - $8250 each Jason - 503-780-4681 call/text for additional photos and a shipping quote to your door.