Not much is know about this Chiller Skid, it was part of an entire brewery system purchased by the Sapporo Breweries LTD. group and was operating up until the time the entire brew house was shut down. Supply and return piping is 1" which indicates the flow rate to be approx. 20 GPM
Stand Alone Ice Water Chiller, not much information available on the unit, it has two fans, a side inlet updraft air flow configuration. Includes a SAG model FQS - W12G outlet electric solenoid valve at 1" diameter. Cost = $ 250 or best offer
June 22, 2020 updated list Here’s a current list of systems we have in stock today, open to offers One FILTRN 1/2HP air-cooled indoor rated package chiller on wheels. 115 volt single phase power. Application temp range is 40F-70F. One Remcor 3/4HP air-cooled indoor rated package chiller on wheels. 230 volt single phase power. Application temp range is 42F-70F. ------ SOLD on June 15, 2020 for $1,500.00 as is----- One TEMTK 1 HP air-cooled indoor rated package chillers. 230 volt 1 phase power. Application temp range is 28F-70F. Two JCY Remanufactured 1 HP air-cooled indoor rated package chillers. 230 volt 1 (or 3 phase) phase power. Application temp range is 28F-70F. One FILTRN 5HP water-cooled indoor rated package chiller. 460 volt 3 phase power. Application temp range is 40F-70F. One FILTRN 5HP water-cooled indoor rated package chiller. 460 volt 3 phase power. Application...
Insulated SST Hot Water Storage and Transfer Skid, Square SST Bulk Storage Tank. Dual Transfer Pumps, Point Level Controller, Insulated SST Suction and Transfer Piping, all mounted to a SST angle iron frame with adjustable feet. Note: transfer pumps exhibit a lot of external rust
1 ea. Barnstead CO2 Series Incubator, Model Thermolyne, Type 15330, 120 VAC, Comes with three (3) stainless steel shelves and the original operations manual. Unit turns right on and develops heat based upon dial settings, but needs the CO2 inlet fitting to be straightened out it has been bent.
June 22, 2020 Hi Brew buddies, We have several cooling coils (slightly used), cleaned up, test and fully functional. They range from 5 ton to 40+ ton. Power requirement ranges from 115 volt to 208/230/480 3 phase. They can be used to cool walk in cooler, spot cooling or whole warehouse cooling. Price is based on unit. Please contact us at firstname.lastname@example.org for more info and to size your cooling load.
Needs compressor replaced. Works fine. I dont have time to mess with it. $500 + freight https://www.beveragefactory.com/draftbeer/glycol-chiller/eg-3_4p.shtml
371 Gallon single wall bulk ambient water tank, with Hitachi Neuro Jr Water Ace chiller package with single pass cooling, on-board in-line sanitary strainer, all stainless steel sch. pipe manifolds included with associated butterfly valves. Tank, Chiller, Strainer and related piping mounted to a SST angle iron frame with adjustable feet. Note: tank head space is badly rusted and will need mechanical polishing and a strong acid wash to get it anywhere near good. Might be best to replace the top head. Other components are in really good shape. Caution: the unit requires 50 Hrtz power.
Insulated SST Cold Water Storage and Transfer Skid, Square SST Storage Tank with Point Level Controller, Dual Transfer Pumps, Insulated SST Suction and Discharge Piping all mounted to a SST angle iron frame with adjustable feet
Alfa Laval Plate and Frame HXC's, quantity - two (2), Frame Size M-10, 111.3 Square Feet and 47.4 Square Feet, 6 inch flat faced 150" ANSI flange on all port connections, blue epoxy paint. Last used for a short period of time in a waste water application, removed from service in 2008 and stored indoors ever since. $ 800.00 each, buy both for $ 1,400.00
Avantco Cooler Model #178SS3RHC Unit Requires Repairs: Install new compressor and new refrigerant and new drier. OEM parts $1,890.00 (estimate received) Width 81 Inches Depth 32 1/4 Inches Height 82 1/2 Inches Interior Width 76 1/4 Inches Interior Depth 27 1/8 Inches Interior Height 60 1/4 Inches
Stand alone refrigeration skid to make approx. 60 GPM of chilled water for wort cooling, includes: Bitzer R22 Compressor & Coil Grundfos Dual Centrifugal Transfer Pumps Falling Film Plate HXC's ( x 6) HDPE bulk storage tank hafner (Kalte +Kilmatechnik) controls * Have the wort cooler also
June 15, 2020 Afternoon Brew buddies, We have one slightly used .75 HP indoor rated package chiller for sale. 208/230 volt 1 phase. only runs to 42F LFT. Got in on trade / ran great on testing, cleaned up and ready for your brew cooling! Nice unit for a small brew pub or pilot system. Asking $1,300 and with or without warranty dependent on sale price. (new they sell for around $4,900+ each). more info and photos at email@example.com
Good condition multiplex beermaster 150. One pump, but can can house 2. Up to 150’ run.