Used Product Ad posted 1 day ago in Grain Storage and Handling Equipment by Dustin Teague
Custom Fabricated Mill Roller Grinder for 1-5 BBL System. Hopper is large enough to hold (1)-55 gal. sack of grain. Wood Cabinet below for dust control and storage of milled grain. Can be attached to auger if needed. 1 HP motor. 110v. Comes with 3 sets of back up rollers so you can always have fresh re-knurled rollers to swap out. Rollers were fabricated by https://www.crankandstein.net/ Don Obenauer at crankandstein has been great for the past 7 years keeping our rollers sharp.
Used Product Ad posted 4 weeks ago in Grain Storage and Handling Equipment by Jason Bell
Sized for 15 BBL Brewhouse 15 BBL Grist Case fabricated by Alpha Brewing Ops. Designed for floor placement with mill mounted on top and auger mounted underneath. Great condition; no issues.
Used Product Ad posted 1 week ago in Grain Storage and Handling Equipment by Doug Gaumer
15bbl Grist case and Flex auger, motor, receiver.
Used Product Ad posted 3 weeks ago in Grain Storage and Handling Equipment by Stoney Head
2 Roll grain mill for sale, side by side 14" rollers, hopper on top, grain shoot on bottom, adjustable crush size, access panels for easy cleaning, must have 208/230V 3 phase power supply, 26A. We purchased this brand new in 2013 and it has been a workhorse for our brewery. Currently set up for plug in to run but can easily be converted to a wall switch. New drive belts replaced 2019. Comes with back up belts. Weighs roughly a ton (2000 lbs). PRICE REDUCED $3000.00 You pay shipping from Reno, Nevada (89511)
New Product Ad posted 9 months ago in Grain Storage and Handling Equipment by Marks Design and Metalworks
A slide gate for manually releasing or stopping the flow of grist into the mash tun from a grist case. Offered in 3", 4", and 8".
New Product Ad posted 9 months ago in Grain Storage and Handling Equipment by Marks Design and Metalworks
A slide gate for manually releasing or stopping the flow of grist into the mash tun from a grist case. Offered in 3″, 4″, and 8″.
Used Product Ad posted 1 year ago in Grain Storage and Handling Equipment by ABM Equipment
Pictures are too big for the site, go here to scroll the gallery (arrows are hard to see). Briefly-used grist case from the distilling industry with air flow-assist configuration. Free of defects with Ø11″ inlet, Ø6″ outlet, and Ø4″ dust port. Click here to view full drawings and dimensions. Go here for general information about our grist cases. Volume 450 Cubic Feet Capacities Liquid – 3,172 Gal | Grain – 11,436 lbs. Materials 304 Stainless with 2B outer finish and sanitary interior finish Dimensions 132 9/16″ H, 110 1/4″ W Weight 1,876 lbs. Made In USA Price $18,000
Used Product Ad posted 4 weeks ago in Grain Storage and Handling Equipment by Jason Bell
Sized for 7 BBL Brewhouse 7 BBL Grist Case fabricated by American Beer Equipment. Designed for floor placement with mill mounted on top and auger mount underneath. No issues with this piece of equipment; in great condition.
New Product Ad posted 9 months ago in Grain Storage and Handling Equipment by Marks Design and Metalworks
A slide gate for manually releasing or stopping the flow of grist into the mash tun from a grist case. Offered in 3", 4", and 8".
Used Product Ad posted 3 days ago in Grain Storage and Handling Equipment by William Sada
Alpha Grain Mill $4900 Alpha 2 Roller Grist Mill Dust Tight 6x6 Rollers 3000lb/Hr
Used Product Ad posted 10 months ago in Grain Storage and Handling Equipment by Ager Tank & Equipment
Item is an Apollo Model econo 2 roll mill equipped with extended hopper and optional leg extensions. This is a 2 roll mill designed to work well with a 3-15 bbl brewsystem. It is designed with a boot that is compatible with a choretime or GSI auger system. It was sold to a client in 2019 and never installed. It is in new shape and ready to use. New cost for this unit as outfitted is over $5000. 230v/3ph electrics Slae Price - $2750 Jason - 503-780-4681 call/text
Used Product Ad posted 3 weeks ago in Grain Storage and Handling Equipment by Daniel Diaz
Malt Mill model XW-G3. 500 kg/hr capacity, 1.5 kw motor, 208v-240v 3 phase power. Brand new. Buyer pays shipping. $2500.00 Contact Travis Smith via email to Travis@twelvetalons.com with the subject line “Grain Mill”.