Chillers

Used Product Ad posted 5 days ago in Chillers by David Chaney

24HP Pro Chiller Glycol Chiller built in 2011, purchased used in 2018 for a project that didn't happen. It has been in storage since 2018, was in working condition when purchased. Cooling capacity at 25 degrees Fahrenheit is 195792 BTU/HR and at 30 degrees Fahrenheit is 217526 BTU/HR Asking $9,500 obo Need gone asap! All reasonable offers considered  

New Product Ad posted 10 months ago in Chillers by KIG Inc.

  New, USA made 6 hp / ton Glycol Dual Circuit Air Cooled Chiller. This is a USA made chiller with reservoir tank and centrifugal pump.  This chiller is a "TRUE" Dual Circuit Chiller - it's almost like two separate 3 hp chillers side by side, sharing a common tank and pump.  So, two compressors, two condensers, two evaporators, two sets of three of adjustable pressure switches (low / hi / fan) for SIX total.  It's the ultimate in redundancy for optimum uptime.   .  Power is 208/230 THREE phase power.  (we can also have this made in 460 volt and single phase) Model KIG ColdRush GV72CK3-DCRLT Made in the USA Latest R410a refrigerant. Dual Fan type condenser 72,000 btu/hr at 55F nominal fluid temps ~36,000 btu/hr at 28F glycol fluid temps This unit is 208/230 volt, THREE phase power - Ampacity 33 / Max Fuse 43 amps Limit devices: high /...

New Product Ad posted 4 months ago in Chillers by Thermal Care

Thermal Care recently updated their chiller product lines with EPA approved low Global Warming Potential (GWP) R-454B  and R-513A refrigerants. This release is significantly ahead of upcoming legislation to phase out high-GWP refrigerants that contribute to climate change. Governments around the world are implementing regulations to phase out refrigerants they believe pose too much risk to global warming including R-134a and R-410A which are commonly used in chillers. The multitude of rulings and enforcement dates, along with the tight deadlines of state regulations have left manufacturers facing challenges in complying.  Combined with the fact that low-GWP refrigerants have different thermodynamic properties than high-GWP refrigerants, so major component changes are required, many companies may find themselves unprepared or unable to produce equipment with the new components needed. Thermal Care has researched and prepared for these changes for the past two years and is ready to provide the appropriate solutions to meet...

New Product Ad posted 4 months ago in Chillers by Thermal Care

Thermal Care offers an outdoor packaged chiller, designed with the flexibility to provide process cooling year-round, with a wider range of operating conditions than comparable models. Accuchiller KSE Series chillers are fully packaged, integral air-cooled outdoor units manufactured to work in the harshest weather environments. Units are factory tested and ready for easy installation; just run piping and power to the unit and it is set for operation. One of the great features of this new outdoor chiller is the variety of climates where it can be used. Energy saving variable speed EC fans allow the chiller to withstand ambient conditions from -20°F to 125°F. As an added bonus, the process fluid circuit allows for more flexibility with a set point temperature range from 20°F to 80°F. KSE Series chillers come with an advanced outdoor PLC control system with ModBus TCP/IP & RTU and a 7-inch color touch screen similar...

Used Product Ad posted 1 month ago in Chillers by mtnSpirits -

In great shape used for 3 years to chill a 7BBL fermenter and last summer we added 2x 15bbl brites. Used once or twice a week. Changed glycol once a year. I've had zero issues with it. Also have a 7bbl unitank and batch tunnel pasteurizer.

Used Product Ad posted 10 months ago in Chillers by KIG Inc.

Affinity 5 ton Packaged Indoor Process Chiller 208/230V - R22 Pristine Lab Machine Show Me The Unit! This is a Pristine 5 ton Affinity Process Chiller. We purchased this from a college from their Mechanical Engineering Department, where they used the unit for testing/teaching. We would normally not deal with a unit of this vintage but because it's in near new condition we made an exception. Affinity Model FAA-050D-DD05CA Packaged with Pump and cylindrical vertical Reservoir 208-230 3 PHASE 27.6 AMPS 1 HP PROCESS PUMP Compressor Model CRN5-0500-TF5-275 - R22 refrigerant chiller sn 034201 compressor serial 00D09392B (unit made in 2000) Indoor operation only. Ideal setpoint range is ~ 44 f to 70f. unit has remote controller as shown manual included KIG runs and tests every used chiller in our shop 90 day parts only limited warranty

Used Product Ad posted 10 months ago in Chillers by KIG Inc.

Polyscience Durachill 5 ton Air Cooled Chiller 2016 230/240 volt, RUN & TESTED! Show me the unit! Stock can change daily please check with us on availability! KIG, (Keith Industrial Group Inc.)specializes in NEW and used Air Cooled Chillers for industries such as breweries, wineries, manufacturing, plating, plastics, and comfort and cooling. We provide hundreds of units per year from 20 ton up to 323 ton. This is an indoor Polyscience Durachill 5 ton air cooled process chiller packaged with a pump and a tank. It actually contains a 6hp compressor, but the manufacturer refers to it as their 5 ton. KIG received this unit several months ago. After performing a few minors repairs and extensive testing, KIG can confirm that this chiller is in great condition and is operating smoothly. This chiller has an ideal fluid setpoint operating range of 44F to ~70F. It does have a hot gas...

Used Product Ad posted 10 months ago in Chillers by KIG Inc.

2012 3 ton Koolant Koolers Air Cooled Chiller - OUTDOOR rated, 460V run & tested Show Me The Unit! This is a nice 3 ton, outdoor rated air cooled Koolant Koolers / Dimplex Thermal Process Chiller from Keith Industrial Group (KIG, Inc.). Unit is rated for outdoor use with low and high ambient option, weatherproof galvanized construction, and controller on a remote cable. Unit can also be operated indoors. It's ideal fluid temp range is in the 50F to 70F set-point area. 460 volt 3 phase power. Has upgraded 2 hp process pump. Koolant Koolers - Dimplex Thermal Model SVO-3000M Manufactured in 2012 Packaged with 2 hp Pump and 34 gallon Reservoir serial number 35437 460 volt 3 phase power, 13.2 ampacity, 20.1 maximum over-current protection 2 HP PROCESS PUMP R407C refrigerant KIG runs and tests every used chiller in our shop 90 day parts only limited warranty Customer Service...

Used Product Ad posted 3 months ago in Chillers by J C Younger Company

In production currently. CHILLER ID ADVANTAGE ENGINEERING MOD # BG-3A VOLTAGE 208/230 VOLTS 60HZ 40 AMP 1 PHASE REFRIGERANT R407C COMPRESSOR 3HP COPELAND RECIP CONDENSER AIR-COOLED PROCESS PUMP 1 HP LOCATION OUTDOOR CHILLER DIMENSION AND WEIGHT 600 pounds Height : 42" Width : 34" Depth : 40" RESERVOIR 7 GALLONS Photos on this add are not exact of unit but close too. Once unit is built and ready to ship: we can send you photos of it. If you mention this AD you'll get a FREE 5 gallon 50% glycol and or if you rent the chiller anything more than 12 months you will get a free month.  

New Product Ad posted 3 months ago in Chillers by J C Younger Company

Currently we have 5 ready to be shipped. Five Horsepower Glycol Brewery Chiller Unit Breweries need to keep their equipment cool in order to operate efficiently, and now there's a new JC Younger chiller that can do just that. This industrial-strength chiller is designed for indoor use and can be set to as low as 25 Fahrenheit. It has a power requirement of 208/230 volt 1 phase and one at 3 phase, making it perfect for breweries of all sizes. Plus, the JCY Deluxe Brewery Industrial Chiller comes with an oversized 25-gallon glycol tank and a variety of other features that make it indispensable for any brewery looking to stay efficient and up to code. https://prochiller.com/chiller-data-sheet-fill.php/?mod=PE105F1R420-A-V* Industrial Chillers for the Brewery Industry JCY industrial chillers are specially designed and built to meet and exceed the demands of brewing industry professionals. Industrial Chiller Specifications Unit power requirement 208/230 volt 1 phase....

New Product Ad posted 3 weeks ago in Chillers by PRO Refrigeration, Inc.

Check out our INCREDIBLE new Glycol pricing - reduced by over 50%! Shield your system with added corrosion protection for mild steel, copper, and aluminum during long-term use in closed systems. Our non-toxic and non-corrosive formula offers enhanced flow, lubrication, and burst protection in extreme temperatures. Ship with your next system, or stock up for the season! *100% Concentration, Pre-Dyed Blue.

New Product Ad posted 10 months ago in Chillers by KIG Inc.

KIG (Keith Industrial Group, Inc) is the leading supplier in the USA of New Johnson Controls / York Air Cooled Chillers in the 20 to 320 ton range, providing ~ 100 units per year.  This unit is available now due to a cancellation, it just arrived 1st week of December.  It is Model YLAA-0089SE46VSD.  We are typically offering this unit out in the April timeframe so this is a great opportunity if your brewery/winery is in need of this size. ~ 82 tons nominal "glycol package" , meaning electronic exp. valves, etc., allowing glycol running temps down into the 22F range at 25f, effective tonnage with de-rating is ~ 58 tons (~ 700,000 btu's/hr).  If you are reading this on pro-brewer you most likely understand what this means. 6 scroll compressor.  Brazed Plate Evap.  Dual circuits.  Hot Gas on circuit A.  Control Transformer.  Louvers on top. 460 volt 3 phase...