10 HL Brewhouse ready to go
New Product Ad posted 10 months ago in Brewhouse or Brewing Systems by Ripley Stainless Ltd.
10 HL (2) Vessel Steam Heated Brewhouse
•Overall Dimensions: OAL 167” OAW 85” OAH 98”
•Brewhouse Efficiency: 75% – 90%
•Brew Kettle/Whirlpool: Dimensions: 49” ID x 53” sidewall, 1 ½” CIP, (1) rotating sprayball, 6” vent stack c/w condensate ring x 20’ tall, top glass manway, steam jacket – (1) sidewall, (1) bottom , maximum 20 psi steam jacket, whirlpool inlet, thermowell, 1 ½” racking port, 7/8” sight tube, 1 ½” drain, slope inverted cone bottom, 2” mineral wool insulation (bottom & sidewall), (4) stainless legs c/w adjustable feet, #4 OD finish
•Lauter Tun: Dimensions: 55” ID x 59” sidewall, 1 ½” TC CIP, (2) rotating spray balls, 3 sparging nozzles, vorlauf c/w depression plate, 4” grain inlet & 4” hydrator, top glass manway, bottom rectangle manway, manometer (2pcs 7/8” sight tube), steam jacket (1) sidewall, Maximum 20 psi steam jacket, 2” mineral wool insulation (sidewall only), cone bottom, 1 ½” drain, v-wire false bottom, (4) tall stainless legs c/w adjustable feet, #4 OD finish
•Platform: approx. 4’ between 2 vessels, approx. 3’ high c/w railings & 24” wide stairs, fiberglass decking, all 304 stainless steel
•Piping: Swing Link (8) 1 ½” outlets (2) swing links wort grant attached or fixed piping (12) 1 ½” valves, (1) micro adjust butterfly valve, fixed wort grant, all stainless steel piping & connections cold water temperature must be 4 -5 ° C (water & wort)
•Heat Exchanger: stainless steel plates – dual pass c/w inline thermometer based on 45 min knock out time cold water temperature must be 4 -5 ° C (water & wort)
•Water Blending: (2) globes valves, (2) btfy valves, inline tee and thermometer
•Sani Pump: 3HP 1 ½” fittings and mount
- Manufacturer : Ripley Stainless Ltd.
- Original Manufacture Date : 2021
- Where Manufactured : Canada
- Ships From : Summerland
Leave a Reply
You must be logged in to post a comment.