Complete STOUT Brewing System including brite tank and fermenters ( $35,000 )

Used Product Ad posted 4 weeks ago in Nano Brewing Equipment by Sean Mcdonald

We are looking to sell off our smaller pilot system. It has run really well for us without any problems. We would prefer to sell as one unit but taking offers on the different parts if it doesn’t sell in a month we will piece it out.

($1839.00) Brew Kettle:

90 Gal. Brew Kettle with thermowell, sight glass, tangential inlet,

thermometer, (3) 1.5in. Butterfly valves, heat shield around legs.

($1899.00)Hot Liquor Tank:

80 Gal. Hot Liquor Tank with thermowell, Stainless Steel HERMS coil, sight

glass, (1) 1.5in. Butterfly valve. (1) 3in. TC Cap, (1) 3in. TC gasket, (1) 3in. TC clamp for lid port. On legs, approx. 13″ above the ground.

($1939.00)Mash Tun:

80 Gal. Mash Tun with Manway and recirculation fitting. On legs with (1) butterfly valve and false bottom.

($420)HopBack/Wort Grant:

9.7 gal. total capacity combination tank with clamp down lid.

For use as a Hop Back and as a Wort Grant. Includes tank on legs, clamp on lid, bottom outlet, false bottom, tangential inlet, upper inlet, and vent on lid. Includes (2) 1.5″ TC caps for closing off unused ports.

($399.00)Condensate Stack for 4 bbl Brew Kettle.

($80.00)Sparge Arm for  Mash Tuns with arm and ball.

($40.00)Spray Ball, with 3in. TC Port x 1.5in. TC port @ 90 degrees.

($420) 3 – 1.5″ TC Vacuum/Pressure Relief Valve, 15 psi. Valve will prevent vacuum in a tank

and will release pressure if it exceeds 15 psi (1 bar).

($4949.00) 4 Bbl Jacketed Brite Beer Tank. Side Manway. Rated to 15 psi. 35.5″OD x

66.5″ H. Includes CIP arm and spray ball, sample valve, 2 butterfly valves, fittings for sight

glass tubing (connects to CIP arm and bottom outlet for ease of cleaning – use clear draft

beer line, not included). Constructed of 304 stainless steel, tank material thickness is 3mm,

jacket and outer shell thickness is 2mm.

($5095.00)4 Bbl Jacketed Conical Fermenter – Side Manway. Dual-zone jacketing is in cone and on side wall. 157 gal. capacity. Includes racking arm, CIP arm and spray ball, sample valve, racking arm, 2 butterfly valves, adjustable feet. 15 psi rating. Constructed of 304 stainless steel, tank material thickness is 3mm, jacket and outer shell thickness is 2mm. Cone has 60 degree interior angle. 35.5-in. diameter x 83-in.H.

($30.00)Pressure gauge, 30 psi. Glycerine filled, all Stainless Steel Case AND Internal

Components, 1/4 inch male NPT threads. 30 psi max. BACK MOUNT.

($1758) 80 Gal. Conical Fermenter with T/C style Thermowell, (2) 1.5in.

Butterfly Valves, (1) 1/2in. Hose Barb, (1) 1/2in. x 90 deg. Hose Barb Adapter,

Clamps/Gaskets. With cooling coil through the lid.

($5095.00)4 Bbl Jacketed Conical Fermenter – Side Manway. Dual-zone jacketing is in cone and on side wall. 157 gal. capacity. Includes racking arm, CIP arm and spray ball, sample valve, racking arm, 2 butterfly valves, adjustable feet. 15 psi rating. Constructed of 304 stainless steel, tank material thickness is 3mm, jacket and outer shell thickness is 2mm. Cone has 60 degree interior angle. 35.5-in. diameter x 83-in.H.

($4,850.00)Chiller:

Pro 3/4HP Chill & Flow Micro Chiller System from Pro Refrigeration

Model # PE1008B1R405-A

Capacity:  5,550. BTU/HR based on 28F glycol and 90F ambient temperatures

Spec Sheet:  http://www.prochiller.com/chillflow.html

The 3 / 4 Chill & Flow System is fully packaged with glycol Reservoir and pump included. The Chill & Flow is designed for indoor applications only and can be run off of 120v or 208-23v, single phase power.

($550.00)Caster Kit Base for Portability:  

Additionally we will throw in for no charge:

A dozen- Tri Clamp Caps.(worth $5 each)

A dozen- Tri Clamp.(worth $8 each)

All Items can be picked up at anytime. All shipping costs are handled by the purchaser and NOT included in the price. 

We are open for conversations. We have a smaller 2 tap keg washer for sale, and an assortment of other smaller equipment that has been helpful to accompany this system but we will no longer be needing such as hoses, clamps, grain grinder and anything else we can throw in.

  • Manufacturer : Stout
  • Original Manufacture Date : 01/28/14
  • Where Manufactured : USA
  • Ships From : Enumclaw, Wa 98022
Contact this listing owner

Please Login or register to contact the poster of this classified ad.

To top