Used Product Ad posted 6 days ago in Bottling Equipment by Michael Killgore
SN 6022TGA07814 Meheen 6 head filler Originally set up to run 22oz bottles, was sent off to Meheen to be converted to run 500ml. Comes with a bunch of old parts if you want to try to run different shape/sized bottles. With shims, the crowner and filler swapped, I was able to run a couple different shape 500ml bottles. Comes with a bunch of extra parts.
Used Product Ad posted 2 weeks ago in Other Cooling and Heating Equipment by Michael Killgore
30 bbl HLT – has steam calandria, might be closer to 1000 gallons. Needs a new custom door gasket fabricated. Has some scaling, we want it gone asap. $1000 obo plus asking that your rigger move one tank for us from Milwaukie to SE Portland before collecting this tank. 1. ALL of the equipment to move this tank without damaging the floor of a warehouse, lift onto a trailer, and haul the tank. 2. Ability to Legally haul a wide load. 3. Experience in rigging. 4. Proof of business’s liability insurance. you must remove from the warehouse and load it yourself with your own equipment.
Used Product Ad posted 2 weeks ago in Grain Storage and Handling Equipment by Michael Killgore
Free was used for malted barley for brewing beer, has to be taken apart to remove from building. Holds 48000 lbs of malt. You can take the auger too. 1. ALL of the equipment to move this tank without damaging the floor of a warehouse, lift onto a trailer, and haul the tank. 3. Experience in rigging. 4. Proof of business’s liability insurance. Free but you must remove from the warehouse and load it yourself with your own equipment.
Used Product Ad posted 2 weeks ago in Other Packaging Equipment by Michael Killgore
Regularly serviced, last service was 10/26/2023 Lanxess Velcorin DT-6 doser. Minimum/maximum beverage flow rate of 1200 L/hr to 7200 L/hr
Used Product Ad posted 2 weeks ago in Other Cooling and Heating Equipment by Michael Killgore
Product description Our Kreuzmayr chamber pasteurizer units are designed to pasteurize products which have already been filled into bottles or cans. The KKP 960 chamber pasteurizer is heated through direct steam injection into the chamber, used to heat the product to the desired pasteurization temperature. Air circulation within the steam chamber is facilitated by a stainless steel air blower. The steam is injected, through a pneumatically activated steam valve, into an air channel for optimized steam mixing. There is a condensate drain on the bottom of the chamber, as condensate can not be recirculated in these systems. The thickness of the insulation is 40-100 mm in the chamber walls.